APPLICATION NOTE 4491

Damage from a Lightning Bolt or a Spark—It Depends on How Tall You Are!


Abstract: Large steel buildings, automobiles, mountains, even people survive real atmospheric lightning. Humans can also create their own miniature lightning bolts (sparks) and survive. When those sparks reach an IC, however, major trouble results. In this tutorial, we will discuss ways to protect printed circuit boards (PCBs) against ESD destruction. We will show that analog parts with bigger geometries are the best to use to protect a field-programmable gate array (FPGA) with their small geometries. By taking these measures, the ICs in an FPGA remain more reliable and deliver consistent quality performance.

A similar version of this article appeared in the July 27, 2012 issue of Power Electronics Technology magazine.

Introduction

Lightning can be fun and entertaining, or dangerous and destructive. Maybe all these things at once—it just depends on where you are, what you are doing, and your height. For an IC, lightning is never good.
A few years ago we were in a 10-story, steel-frame hotel building. An afternoon lightning storm approached across a large open field. Because of the building's steel frame, we felt comfortably safe. Our computers were not plugged in, so that was no concern. It was a spectacular show for about 10 minutes as the storm passed.
Large steel buildings, automobiles, mountains, even people survive real atmospheric lightning. Humans can also create their own miniature lightning bolts (sparks) and survive. When those sparks reach an IC, however, major trouble results. Nanometer-tall transistors need protection to survive even human sparks. In this tutorial, we will discuss ways to protect printed circuit boards (PCBs) against ESD destruction. We will show that analog parts with bigger geometries are the best to use to protect a field-programmable gate array (FPGA) with their small geometries. By taking these measures, the ICs in an FPGA remain more reliable and deliver consistent quality performance.

A Spark from Two Perspectives

Where do human-generated sparks come from? They are caused by a triboelectric charge. That is a big word. This happens when two materials come into contact (rubbing helps) and are then separated. Some electrons will transfer to one of the items. How many electrons move and to which surface depends on the material's composition. This is a common phenomenon because almost all materials, insulators, and conductors exhibit triboelectric properties. We are familiar with many common sources. Petting the cat's fur, rubbing a balloon on one's hair, and walking across a rug can all exhibit the triboelectric effect.
A tutorial on the fundamentals of electrostatic discharge1 illustrates the voltages that humans produce during various activities. Table 1 lists those voltages versus relative humidity (RH).
Table 1. Human Activity and the Static Charge Generated
Typical Voltage Levels
Means of Generation 10% to 25% RH 65% to 90% RH
Walking across a carpet 35,000V 1,500V
Walking across vinyl tile 12,000V 250V
Working at an ungrounded bench 6,000V 100V
Picking up a polybag from a bench 20,000V 1,200V
Sitting in a chair with urethane foam 18,000V 1,500V
No wonder it hurts when we walk across a rug and touch a door knob! A general rule is that 5,000V can jump about one centimeter (0.4 inches) in 50% RH air. For someone five- or six-feet tall, this is a spark; it is painful, but we survive. Now change your perspective. What havoc would that spark cause to something a few micro-inches tall, like a transistor in an integrated circuit (IC)? In this situation, a centimeter spark is a massive, frightening, lightning display.
Now, we can turn to ICs. Microprocessors have long led the density improvements of digital semiconductors. Fabrication technology has resulted in smaller and smaller transistors. In 1971, the Intel® 4004 computer processing unit (CPU) was introduced in a 10µm geometry. In the 1980s and 1990s, the process made parts smaller than a bacterium. In 2012, ICs are approaching densities 1,000 times smaller than the 1971 technology and the features on the chip are smaller than a virus. In 2012 one can buy FPGAs with 28nm features and 6.8 billion transistors in one package2 and the future promises to double that density in the next few years. The small transistors are closely packed together and need to operate on low voltages (typically 1V and below) to control the heat generated.
To put 28nm in perspective, note the zeros: it is 28 billionths of a meter (0.000000028). Let the distance between San Francisco and New York City represent one meter (about 4000 kilometers or 2500 miles). Now 28nm (one part in 36 million) is 0.11 meters or 4.4 inches. How big must a lightning bolt be to damage such small geometry devices and how does one protect such necessary and useful FPGAs?
The easy answer is to use the very I/O interface devices that bridge the digital and analog worlds. Analog mixed-signal ICs are made in comparatively large geometries (10 to 100 times larger than digital) and with higher voltage (typically 20V to 80V and higher), which makes them more robust than the tiny digital transistors. Though today's analog mixed-signal devices are generally tolerant of ESD, they do benefit from discrete ESD devices.3

Understanding the Damage from a Spark

Semiconductor manufacturers take electrical overstress (EOS) and electrostatic discharge (ESD) very seriously. First, for the obvious reason, that EOS and ESD can destroy parts during fabrication, package assembly, and test. But more importantly, these negative forces directly impact the quality and lifetime of the circuit in the customer's hands.
At first a part that is electrically overstressed may appear to function properly. It might even function in a slightly degraded manner but still pass the automatic test equipment's (ATE) examination, only to fail later in the field. EOS and ESD failures are preventable and are, without doubt, critical quality-control issues.
Building an IC in manufacturing is the first place where EOS and ESD damage can occur. Figure 1A shows a schematic diagram of the PCB. We might think that the IC is protected by the series capacitor. This is not the case. The second opportunity for damage is when the customer mounts the IC on a PCB to build a product. Looking closer at Figure 1B we see that the capacitor has a 50V working voltage, but the distance between the two metallic end connections is only 0.28 inches (7mm). Since the spark just jumped 0.4 inches (1cm), the small gap around the capacitor is easily compromised. The result may be that the IC pays with its life (Figure 1C). Finally, the EOS or ESD damage can occur when the customer operates the product in their environment.
Figure 1. Sources of board-level EOS and ESD problems.
Figure 1. Sources of board-level EOS and ESD problems.
There certainly are many opportunities for considerable damage. We can actually see the result of EOS and ESD destruction inside an IC. To do this, the package epoxy material must be removed. This is usually done with hot acids in a double-glove isolation box. This process is incredibly dangerous. The fumes are deadly. One breath will cause a painful death; one drop of acid on human skin would result in, at best, the amputation of a hand or arm, or at worst death.
Microphotograph Figure 2A shows no apparent damage. The bond wire and pad labeled REF is provided so we can orient ourselves and compare photos. The liquid crystal material is painted on the die (pink color) and is similar to the liquid crystal used in mood rings and children's forehead thermometers. It changes color with small changes in temperature. When power is applied to the IC, the area drawing excess current, marked here with a yellow box, heats and changes color. It is a hot spot. This is interesting, but what caused the problem?
Figure 2A. A circuit in visible light shows no apparent damage from EOS or ESD. The liquid crystal area (marked in yellow) of the circuit is damaged by heat.
Figure 2A. A circuit in visible light shows no apparent damage from EOS or ESD. The liquid crystal area (marked in yellow) of the circuit is damaged by heat.
The REF bond wire (Figure 2B) indicates that this image is rotated 45 degrees. As we progressively zoom in, we see electromigration. The EOS has caused a short circuit as the damage grew under the influence of the electrical stress. This process can happen over time and progress during many short stresses until, suddenly, the part fails.
Figure 2B. Scanning electron microscope photos of the circuit in Figure 2A.
Figure 2B. Scanning electron microscope photos of the circuit in Figure 2A.
For comparison, now we examine another IC where a lightning bolt caused quick destruction (Figure 3).
Figure 3. A circuit (left) under visible light shows no apparent damage from the lightning bolt. The same circuit (right) under a microscope shows a hot spot with damage.
Figure 3. A circuit (left) under visible light shows no apparent damage from the lightning bolt. The same circuit (right) under a microscope shows a hot spot with damage.
The "7" in the upper left corner of each image in Figure 3 is for orientation. There is not much to see under visible light, but under magnification the liquid crystal shows the temperature rise and resulting EOS.
Figure 4 plots the data from the circuit in Figure 3 and we see that the known good part exhibits a clean, repeatable plot. The current increases in the vertical axis with 4.5V applied. When the current approaches 250µA, a knee is formed; as the voltage increases, the current stays at 250µA. Figure 4 also shows that the defective part continues to draw more current above the knee.
Figure 4. Semiconductor curve tracer plots for the circuit in Figure 3. Curve tracer current/div.is 50µA; voltage/div. is 1V.
Figure 4. Semiconductor curve tracer plots for the circuit in Figure 3. Curve tracer current/div.is 50µA; voltage/div. is 1V.
Under closer scrutiny, part serial number 1 (SN1) shows a hole in the gate oxide (Figure 5). The lightning bolt shorted the gate to the substrate, causing excess current to flow. Of course, the transistor paid with its life. Typical gate oxide is 5nm to 15nm in thickness, depending on the fabrication process. In dense digital microprocessor parts, the oxide may be 1.2nm to 3nm thick. To illustrate how thin that is, in silicon 1.2nm is ~5 or 6 atoms thick. Thus, to a gate that is a few nanometers tall, almost any spark is a giant lightning bolt.
Figure 5. Scanning electron microscope photos of the circuit in Figure 3. The lightning bolt caused a hole in the gate oxide, which shorted the circuit.
Figure 5. Scanning electron microscope photos of the circuit in Figure 3. The lightning bolt caused a hole in the gate oxide, which shorted the circuit.

Combat the Spark and Protect the Circuit

We will quickly discuss how to protect the ICs and the PCB from a spark and EOS/ESD.
The risetime of a spark is very fast, so any way that we can slow it down will reduce the peak voltage. ESD structures (Figures 6 and 7) are typically used in two places in a system: at the board level inputs and outputs with series resistors; and inductors along with capacitors to ground that can act as a lowpass filter. PCBs are thus protected from EOS/ESD by a combination of discrete silicon (small signal or reference) Schottky diodes, avalanche (Zener) diodes, transient voltage suppression (TVS) diodes, gas-tube discharge devices, resistors, inductors, and metal oxide varistors (MOVs).
Figure 6. An inventory of suggested discrete components which can protect against unwanted electrical vulnerabilities.
Figure 6. An inventory of suggested discrete components which can protect against unwanted electrical vulnerabilities.
Figure 7. Simplified ESD structures.
Figure 7. Simplified ESD structures.
The ESD structures of Figure 7A through C are internal to the ICs. External discrete components used for EOS/ESD protection tend to be physically larger and carry larger currents. In addition to the ESD protection built into many products, specialized ESD protection devices like the MAX14541 and MAX3203 are available to designers.
It is important to note that many circuits have built-in EOS/ESD protection, even though that is not their primary function. Consider for a moment the MAX5481 family of 10-bit nonvolatile (NV) potentiometers, the MAX5134 quad 16-bit DAC, and the MAX6001 family of low-power, low-cost voltage references. A close look at the data sheets shows that ESD is not mentioned. But the ESD specification depends on the IC fabrication process and is stated on the reliability reports for each part. You can find the ESD information by starting at the QuickView page for each part on Maxim's website. Near the bottom of the page is the technical documents area and the reliability report.4 A click here brings up the reliability report page. If the reliability report is not online, it can be requested.

Summary

Whether large or small, steel buildings, automobiles, mountains, and even people survive real atmospheric lightning. Five- to six-foot tall humans can, and regularly do, create their own miniature lightning bolts (sparks) and barely even notice. That is never the case with nanometer-tall transistors. They need protection to survive even human sparks. As we have seen, protection against EOS and ESD destruction of the board circuits and ICs is critical for reliable, quality product performance. Circuit designers should be vigilant to employ EOS/ESD protection circuitry in their designs or to ensure that they are using circuits with built-in ESD protection from the outset. It is a serious oversight to ignore any seemingly trivial spark...no matter how tall you are...or are not.

References

  1. ESD Association, ESD Fundamentals, An Introduction to ESD Part 1, © 2001, Rome, NY at https://www.esda.org/about-esd/esd-fundamentals/part-1-an-introduction-to-esd/.
  2. Xilinx, Device Reliability Report," Table 1-7: Wafer Process Technology Family," Fourth Quarter 2011 Page 15, www.xilinx.com/support/documentation/user_guides/ug116.pdf.
  3. Tutorial 4991, "Oops...Practical ESD Protection vs. Foolhardy Placebos" and Tutorial 1167, "Practical Aspects of EMI Protection."
  4. Here are some example excerpts of EOS/ESD protection from those reliability reports:
    • Reliability Report for MAX5482EUD+2 (MAX5481, MAX5483, MAX5484). "Item C.) E.S.D. and Latch-Up Testing; The DP22-1 die type has been found to have all pins able to withstand a HBM (human Body Model) transient pulse of 2500 V per JEDEC JESD22-A114-D." For the complete report, go to www.maximintegrated.com/reliability/product/MAX5482.pdf.
    • Reliability Report for MAX5134AGTG+3, "Item C.) E.S.D. and Latch-Up Testing; The DB34 die type has been found to have all pins able to withstand a HBM transient pulse of +/-1500 V per JEDEC JESD22-A114-D." For the complete report, go to www.maximintegrated.com/reliability/product/MAX5134A.pdf.
    • Reliability Report for MAX6001EUR+4 (MAX6002, MAX6003, MAX6004). "Item C.) E.S.D. and Latch-Up Testing; The RF23-6 die type has been found to have all pins able to withstand a HBM transient pulse of 2500 V." For the complete report, go to www.maximintegrated.com/reliability/product/MAX6001.pdf.


Intel is a registered trademark and registered service mark of Intel Corporation.



Related Parts
MAX501 Voltage-Output, 12-Bit Multiplying DACs Samples  
MAX502 Voltage-Output, 12-Bit Multiplying DACs Samples  
MAX507 Voltage-Output, 12-Bit DAC with Internal Reference and 12-Bit Interface Samples  
MAX508 Voltage-Output, 12-Bit DAC with Internal Reference and 12-Bit Interface Samples  
MAX5104 Low-Power, Dual, Voltage-Output, 12-Bit DAC with Serial Interface Samples  
MAX5120 +3V/+5V, 12-Bit, Serial, Voltage-Output DACs with Internal Reference Samples  
MAX5121 +3V/+5V, 12-Bit, Serial, Voltage-Output DACs with Internal Reference Samples  
MAX5122 +5V/+3V, 12-Bit, Serial, Force/Sense DACs with 10ppm/°C Internal Reference Samples  
MAX5123 +5V/+3V, 12-Bit, Serial, Force/Sense DACs with 10ppm/°C Internal Reference Samples  
MAX5130 +3V/+5V, 13-Bit, Serial, Voltage-Output DACs with Internal Reference Samples  
MAX5131 +3V/+5V, 13-Bit, Serial, Voltage-Output DACs with Internal Reference Samples  
MAX5132 +5V/+3V, 13-Bit, Serial, Force/Sense DACs with 10ppm/°C Internal Reference Samples  
MAX5133 +5V/+3V, 13-Bit, Serial, Force/Sense DACs with 10ppm/°C Internal Reference Samples  
MAX5134 Pin-/Software-Compatible, 16-/12-Bit, Voltage-Output DACs Samples  
MAX5135 Pin-/Software-Compatible, 16-/12-Bit, Voltage-Output DACs Samples  
MAX5136 Pin-/Software-Compatible, 16-/12-Bit, Voltage-Output DACs Samples  
MAX5137 Pin-/Software-Compatible, 16-/12-Bit, Voltage-Output DACs Samples  
MAX5138 Low-Power, Single, 16-/12-Bit, Buffered Voltage-Output DACs Samples  
MAX5139 Low-Power, Single, 16-/12-Bit, Buffered Voltage-Output DACs Samples  
MAX514 CMOS Quad, 12-Bit, Serial-Input Multiplying DAC  
MAX5141 +3V/+5V, Serial-Input, Voltage-Output, 14-Bit DACs Samples  
MAX5142 +3V/+5V, Serial-Input, Voltage-Output, 14-Bit DACs Samples  
MAX5143 +3V/+5V, Serial-Input, Voltage-Output, 14-Bit DACs Samples  
MAX5144 +3V/+5V, Serial-Input, Voltage-Output, 14-Bit DACs Samples  
MAX5150 Low-Power, Dual, 13-Bit Voltage-Output DACs with Serial Interface Samples  
MAX5151 Low-Power, Dual, 13-Bit Voltage-Output DACs with Serial Interface  
MAX5152 Low-Power, Dual, 13-Bit Voltage-Output DACs with Configurable Outputs Samples  
MAX5153 Low-Power, Dual, 13-Bit Voltage-Output DACs with Configurable Outputs Samples  
MAX5154 Low-Power, Dual, 12-Bit Voltage-Output DACs with Serial Interface Samples  
MAX5155 Low-Power, Dual, 12-Bit Voltage-Output DACs with Serial Interface Samples  
MAX5156 Low-Power, Dual, 12-Bit Voltage-Output DACs with Configurable Outputs Samples  
MAX5157 Low-Power, Dual, 12-Bit Voltage-Output DACs with Configurable Outputs Samples  
MAX5170 Low-Power, Serial, 14-Bit DACs with Voltage-Output Samples  
MAX5171 Low-Power, Serial, 14-Bit DACs with Force-Sense Voltage-Output Samples  
MAX5172 Low-Power, Serial, 14-Bit DACs with Voltage-Output Samples  
MAX5173 Low-Power, Serial, 14-Bit DACs with Force-Sense Voltage-Output Samples  
MAX5174 Low-Power, Serial, 12-Bit DACs with Voltage-Output Samples  
MAX5175 Low-Power, Serial, 12-Bit DACs with Force-Sense Voltage-Output Samples  
MAX5176 Low-Power, Serial, 12-Bit DACs with Voltage-Output  
MAX5177 Low-Power, Serial, 12-Bit DACs with Force-Sense Voltage-Output Samples  
MAX5200 Low-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in µMAX Samples  
MAX5201 Low-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in µMAX Samples  
MAX5202 Low-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in µMAX Samples  
MAX5203 Low-Cost, Voltage-Output, 16-Bit DACs with Internal Reference in µMAX Samples  
MAX5204 Low-Cost, Voltage-Output, 16-Bit DACs in µMAX Samples  
MAX5205 Low-Cost, Voltage-Output, 16-Bit DACs in µMAX Samples  
MAX5206 Low-Cost, Voltage-Output, 16-Bit DACs in µMAX Samples  
MAX5207 Low-Cost, Voltage-Output, 16-Bit DACs in µMAX Samples  
MAX5230 3V/5V, 12-Bit, Serial Voltage-Output Dual DACs with Internal Reference Samples  
MAX5231 3V/5V, 12-Bit, Serial Voltage-Output Dual DACs with Internal Reference Samples  
MAX5234 Single-Supply 3V/5V, Voltage-Output, Dual, Precision 12-Bit DACs  
MAX5235 Single-Supply 3V/5V, Voltage-Output, Dual, Precision 12-Bit DACs Samples  
MAX525 Low-Power, Quad, 12-Bit Voltage-Output DAC with Serial Interface Samples  
MAX5253 +3V, Quad, 12-Bit Voltage-Output DAC with Serial Interface Samples  
MAX526 Calibrated, Quad, Voltage-Output, 12-Bit DAC  
MAX5264 Octal, 14-Bit, Voltage-Output DAC with Parallel Interface for ATE  
MAX527 Calibrated, Quad, Voltage-Output, 12-Bit DAC  
MAX5270 Octal, 13-Bit Voltage-Output DAC with Parallel Interface  
MAX5290 Buffered, Fast-Settling, Dual, 12-/10-/8-Bit, Voltage-Output DACs Samples  
MAX5291 Buffered, Fast-Settling, Dual, 12-/10-/8-Bit, Voltage-Output DACs Samples  
MAX530 +5V, Low-Power, Parallel-Input, Voltage-Output, 12-Bit DAC Samples  
MAX5302 Low-Power, 12-Bit Voltage-Output DAC with Serial Interface Samples  
MAX5306 Low-Power, Low-Glitch, Octal 12-Bit Voltage-Output DACs with Serial Interface Samples  
MAX5307 Low-Power, Low-Glitch, Octal 12-Bit Voltage-Output DACs with Serial Interface Samples  
MAX531 +5V, Low-Power, Voltage-Output, Serial 12-Bit DACs Samples  
MAX5312 ±10V, 12-Bit, Serial, Voltage-Output DAC Samples  
MAX532 Dual, Serial Input, Voltage-Output, Multiplying, 12-Bit DAC Samples  
MAX5322 ±10V, Dual, 12-Bit, Serial, Voltage-Output DAC Samples  
MAX535 Low-Power, 13-Bit Voltage-Output DACs with Serial Interface Samples  
MAX5351 Low-Power, 13-Bit Voltage-Output DACs with Serial Interface Samples  
MAX5352 Low-Power, 12-Bit Voltage-Output DACs with Serial Interface Samples  
MAX5353 Low-Power, 12-Bit Voltage-Output DACs with Serial Interface Samples  
MAX536 Calibrated, Quad, 12-Bit Voltage-Output DACs with Serial Interface Samples  
MAX537 Calibrated, Quad, 12-Bit Voltage-Output DACs with Serial Interface Samples  
MAX538 +5V, Low-Power, Voltage-Output, Serial 12-Bit DACs Samples  
MAX539 +5V, Low-Power, Voltage-Output, Serial 12-Bit DACs Samples  
MAX541 +5V, Serial-Input, Voltage-Output 16-Bit DACs Samples  
MAX542 +5V, Serial-Input, Voltage-Output 16-Bit DACs Samples  
MAX543 Serial, CMOS, Multiplying, 12-Bit DAC in 8-Pin Package Samples  
MAX544 +5V, Serial Input, Voltage-Output 14-Bit DACs Samples  
MAX5441 +3V/+5V, Serial-Input, Voltage-Output, 16-Bit DACs Samples  
MAX5442 +3V/+5V, Serial-Input, Voltage-Output, 16-Bit DACs Samples  
MAX5443 +3V/+5V, Serial-Input, Voltage-Output, 16-Bit DACs Samples  
MAX5444 +3V/+5V, Serial-Input, Voltage-Output, 16-Bit DACs Samples  
MAX545 +5V, Serial Input, Voltage-Output 14-Bit DACs Samples  
MAX547 Octal, 13-Bit Voltage-Output DAC with Parallel Interface Samples  
MAX5481 10-Bit, Nonvolatile, Linear-Taper Digital Potentiometers Samples  
MAX5482 10-Bit, Nonvolatile, Linear-Taper Digital Potentiometers Samples  
MAX5483 10-Bit, Nonvolatile, Linear-Taper Digital Potentiometers Samples  
MAX5484 10-Bit, Nonvolatile, Linear-Taper Digital Potentiometers Samples  
MAX5500 Low-Power, Quad, 12-Bit Voltage-Output DACs with Serial Interface Samples  
MAX5501 Low-Power, Quad, 12-Bit Voltage-Output DACs with Serial Interface Samples  
MAX551 +3V/+5V, 12-Bit, Serial, Multiplying DACs in 10-Pin µMAX Package Samples  
MAX552 +3V/+5V, 12-Bit, Serial, Multiplying DACs in 10-Pin µMAX Package Samples  
MAX5530 Ultra-Low-Power, 12-Bit, Voltage-Output DACs Samples  
MAX5531 Ultra-Low-Power, 12-Bit, Voltage-Output DACs Samples  
MAX5532 Dual, Ultra-Low-Power, 12-Bit, Voltage-Output DACs Samples  
MAX5533 Dual, Ultra-Low-Power, 12-Bit, Voltage-Output DACs Samples  
MAX5534 Dual, Ultra-Low-Power, 12-Bit, Voltage-Output DACs Samples  
MAX5535 Dual, Ultra-Low-Power, 12-Bit, Voltage-Output DACs Samples  
MAX5541 Low-Cost, +5V, Serial-Input, Voltage-Output, 16-Bit DAC Samples  
MAX5544 Low-Cost, +5V, Serial-Input, Voltage-Output, 14-Bit DAC Samples  
MAX5580 Buffered, Fast-Settling, Quad, 12-/10-/8-Bit, Voltage-Output DACs Samples  
MAX5581 Buffered, Fast-Settling, Quad, 12-/10-/8-Bit, Voltage-Output DACs  
MAX5590 Buffered, Fast-Settling, Octal, 12/10/8-Bit, Voltage-Output DACs Samples  
MAX5591 Buffered, Fast-Settling, Octal, 12/10/8-Bit, Voltage-Output DACs Samples  
MAX5621 16-Bit DACs with 16-Channel Sample-and-Hold Outputs  
MAX5631 16-Bit DACs with 32-Channel Sample-and-Hold Outputs  
MAX5632 16-Bit DACs with 32-Channel Sample-and-Hold Outputs  
MAX5633 16-Bit DACs with 32-Channel Sample-and-Hold Outputs  
MAX5661 Single 16-Bit DAC with Current and Voltage Outputs for Industrial Analog Output Modules Samples  
MAX5712 Low-Power, 12-Bit, Rail-to-Rail Voltage-Output Serial DAC in SOT23 Samples  
MAX5722 12-Bit, Low-Power, Dual, Voltage-Output DAC with Serial Interface Samples  
MAX5732 32-Channel, 16-Bit, Voltage-Output DACs with Serial Interface Samples  
MAX5733 32-Channel, 16-Bit, Voltage-Output DACs with Serial Interface Samples  
MAX5734 32-Channel, 16-Bit, Voltage-Output DACs with Serial Interface Samples  
MAX5735 32-Channel, 16-Bit, Voltage-Output DACs with Serial Interface Samples  
MAX5742 12-Bit, Low-Power, Quad, Voltage-Output DAC with Serial Interface Samples  
MAX5762 32-Channel, 16-Bit, Voltage-Output DACs with Serial Interface  
MAX5764 32-Channel, 16-Bit, Voltage-Output DACs with Serial Interface  
MAX5773 32-Channel, 14-Bit, Voltage-Output DACs with Serial Interface  
MAX5774 32-Channel, 14-Bit, Voltage-Output DACs with Serial Interface Samples  
MAX5775 32-Channel, 14-Bit, Voltage-Output DACs with Serial Interface  
MAX5812 12-Bit Low-Power, 2-Wire, Serial Voltage-Output DAC Samples  
MAX5822 Dual, 12-Bit, Low-Power, 2-Wire, Serial Voltage-Output DAC Samples  
MAX5839 Octal, 13-Bit Voltage-Output DAC with Parallel Interface  
MAX5842 Quad, 12-Bit, Low-Power, 2-Wire, Serial Voltage-Output DAC Samples  
MAX6001 Low-Cost, Low-Power, Low-Dropout, SOT23-3 Voltage References Samples  
MAX6002 Low-Cost, Low-Power, Low-Dropout, SOT23-3 Voltage References Samples  
MAX6003 Low-Cost, Low-Power, Low-Dropout, SOT23-3 Voltage References Samples  
MAX6004 Low-Cost, Low-Power, Low-Dropout, SOT23-3 Voltage References Samples  
MAX7645 CMOS 12-Bit Buffered Multiplying DACs Samples  
MX7245 Complete, 12-Bit, Voltage-Output Multiplying DAC  
MX7248 Complete, 12-Bit, Voltage-Output Multiplying DAC  
MX7521 CMOS, 14- and 12-Bit Multiplying DACs Samples  
MX7531 CMOS, 10-Bit Multiplying DAC Samples  
MX7534 Microprocessor-Compatible, 14-Bit DACs Samples  
MX7535 Microprocessor-Compatible, 14-Bit DACs Samples  
MX7536 µP-Compatible, 14-Bit DAC  
MX7537 CMOS, Parallel Loading, Dual, 12-Bit Multiplying DAC Samples  
MX7538 CMOS, µP-Compatible, 14-Bit DAC Samples  
MX7541 CMOS, 12-Bit Multiplying DAC Samples  
MX7541A CMOS, 12 Bit Multiplying D/A Converter Samples  
MX7542 CMOS, 12-Bit, µP-Compatible DAC Samples  
MX7543 CMOS, 12-Bit, Serial-Input DAC Samples  
MX7545 CMOS, Buffered, 12-Bit Multiplying DAC Samples  
MX7547 CMOS, Parallel Loading, Dual, 12-Bit Multiplying DAC Samples  
MX7548 CMOS, 8-Bit-Compatible, 12-Bit DAC Samples  
MX7837 Complete, Dual, 12-Bit Multiplying DAC with 8-Bit Bus Interface Samples  
MX7839 Octal, 13-Bit Voltage-Output DAC with Parallel Interface  
MX7841 Octal, 14-Bit Voltage-Output DAC with Parallel Interface  
MX7845 Complete, 12-Bit Multiplying DAC Samples  
MX7847 Complete, Dual, 12-Bit Multiplying DAC with 8-Bit Bus Interface Samples  


Next Steps
EE-Mail Subscribe to EE-Mail and receive automatic notice of new documents in your areas of interest.
Download Download, PDF Format (272.4kB)  

© Sep 12, 2012, Maxim Integrated Products, Inc.
The content on this webpage is protected by copyright laws of the United States and of foreign countries. For requests to copy this content, contact us.

APP 4491: Sep 12, 2012
APPLICATION NOTE 4491, AN4491, AN 4491, APP4491, Appnote4491, Appnote 4491