Industry 4.0 is alive and well as it continues to gain momentum on a global basis. More and more companies are embracing the promise of optimized factory throughput with 24/7/365 days of up-time. Manufacturing lines can now be re-configured "on-the-fly" as new products enter the queue, resulting in increased productivity and more adaptive manufacturing processes. We are committed to supporting this transformation by delivering innovative solutions for industrial communications. Our ground breaking products and reference designs enable design engineers to rapidly create and prototype new industrial control systems before they are sourced and built.
MAXREFDES150 Pocket IO™ PLC Development Platform Buy
| MAXREFDES27 | IO-Link Optical Proximity Sensor | Buy |
| MAXREFDES36 | IO-Link 16-Channel Digital Input Hub | Buy |
| MAXREFDES37 | IO-Link Quad Servo Driver | Buy |
| MAXREFDES42 | IO-Link RTD Temp Sensor | Buy |
| MAXREFDES16 | 4-20mA Loop-Powered Temp Sensor with HART | Buy |
| MAXREFDES75 | 24-Bit Weigh Scale with 16-Bit DAC, 0 to 10V Output | Buy |
The Pocket IO™ development platform opens up many new pathways to experience the full power of Industry 4.0.
Read Next
Blogs:
Brochures:
MAX20096Ultra-fast transient response with near-fixed frequency minimizes EMI for matrix lighting, wide dimming ratio allows high contrast.
Learn more ›
MAX20050High-performance, compact, and efficient buck LED driver simplifies automotive and general lighting designs.
Learn more ›
MAX20090Single-channel HB LED driver for front-light applications such as high-beam, low-beam, and daytime running lights.
Learn more ›
MAX20092Single/dual/quad-string configurations, programmable 12-bit PWM dimming, enables matrix/pixel lighting up to 1.5A
Learn more ›
MAX20078Industry's First Automotive Buck Controller with Ultra-Fast Response and Pseudo Fixed-Frequency Regulation
Learn more ›
MAX2005860V Synchronous Buck Converter with Internal FETs Enables High Efficiency and Low Temperature Rise
Learn more ›
MAX169902.5MHz Automotive PWM Controller Enables Space-Efficient Preboost Supplies for Cold/Warm Crank Applications
Learn more ›
MAX16823Highly Integrated, High-Voltage LED Driver Ideal for Automotive Applications
Learn more ›
MAX40660Small 3x3 TDFN with wide 490MHz bandwidth captures road condition detail and low 2.1pA/√Hz noise density reduces signal distortion and misinterpretation.
Learn more ›
DS9481R-3C7With the OneWireViewer PC utility, easily exercise and evaluate 1-Wire devices.
Learn more ›
DS9090EVKITWith the OneWireViewer PC utility, exercise and evaluate a broad range of 1-Wire devices.
Learn more ›
MAXREFDES103#: Health Sensor BandDemonstrates the high sensitivity and algorithm processing functions of health-sensing applications.
Learn more ›
MAX16141/MAX16141AMitigates high-voltage transient spikes, fast (0.3µs typ) shutdown response prevents reverse currents, and 5μA (typ) shutdown current reduces battery drain.
Learn more ›
MAX4002610ps overdrive delay at 20mV to 100mV output drive (dispersion) for 0.018cm time-of-flight measurement error in 2mm x 2mm TDFN.
Learn more ›
MAX31910Translates, conditions, and serializes digital output of industrial sensors and switches.
MAX14900EFast 24V driver, low propagation delay, and 100kHz load-switching speed for high-speed PLCs.
MAX14912EVKITOctal HS or push-pull, SafeDemag surge protection with integrated diagnostics and LED matrix.
Learn more ›
MAX14914EVKITThe only fully software-configurable DIO push-pull, fast, and surge protection product with SafeDemag™.
Learn more ›
MAX22190EVKITFully IEC61131-2-compliant octal digital input with wire-break detection, integrated diagnostics, and LED matrix.
Learn more ›
MAXM17624EVKITThe MAXM17624 3.3V output evaluation kit (EV kit) provides a proven design to evaluate the MAXM17624 high frequency, high-efficiency, synchronous step-down DC-DC power module.
Learn more ›
DS2484EVKITDS2484 Converts I2C slave to 1-Wire master. Independent and flexible I2C and 1-Wire operating voltage, user programmable 1-Wire timing.
Learn more ›
DS9120Designed for use with the DS2484EVKIT and 1-Wire PC adapters such as DS9490R.
Learn more ›
MAX22701EFeatures single-ended input with Miller clamp output.
Learn more ›
MAX22701EVKITIncludes two identical ICs for measurement of part-to-part propagation delay matching.
Learn more ›
MAX17853Achieves ASIL-D compliance using a single chip for mid-to-large cell count configurations.
MAX17823HManages high-voltage battery modules and features a 12-bit SAR ADC that measures 12 cell voltages and two temperatures.
Learn more ›
MAXM17623EVKITIntegrated power solution provides 1.5V from an input range of 2.9V to 5.5V with up to 1A of current.
Learn more ›
MAX30134Provides electrochemical impedance spectroscopy measurement capability for 2- and 3-terminal sensors.
Learn more ›
MAX30134EVSYSProvides a single platform to evaluate DC current and EIS measurement capabilities.
Learn more ›
MAX30205EVKITSystem to evaluate the MAX30205 human body temperature sensor. Includes a USB-to-I2C controller and GUI.
Learn more ›
MAX98090Fully integrated audio codec includes analog/digital microphone input, stereo Class D speaker amplifier, and DirectDrive headphone amplifier for portable applications.
Learn more ›
MAX983040.95mA IQ at 3.7V (1.2mA at 5V), offers five selectable gain settings set by a single gain-select input (GAIN) in 1mm x 1mm package.
Learn more ›
MAX98390Easy-to-use Dynamic Speaker Management (DSM™) provides louder and deeper audio while increasing micro speaker sound clarity.
Learn more ›
MAX98357AEasy-to-use, low-cost, digital PCM input amplifier provides industry-leading Class AB audio performance with Class D efficiency.
Learn more ›
MAX30208EVSYSProvides a single platform to evaluate the MAX30208 temperature sensor with ±0.1°C accuracy.
Learn more ›
MAXM86161EVSYSAllows quick evaluation of the MAXM86161 integrated optical module for applications at various sites on the body, particularly in-ear and mobile applications.
Learn more ›
MAXREFDES220Quickly prototype designs that measure finger-based heart rate and SpO2 .
Learn more ›
High-efficiency, high-voltage DC-DC step-down power modulesThese power modules combine an efficient Maxim switching regulator, a fully shielded inductor, and numerous other passive components into one low-profile, thermally-efficient system-in-package (SiP). These modules operate over the industrial temperature range.
MPOS-STD2A complete mPOS solution, pre-evaluated by security labs for compliance with PCI-PTS 4.0 standards.
Learn more ›
MAX32630EVKITPower-optimized Arm Cortex-M4F. Optimal peripheral mix provides platform scalability. On-board Bluetooth 4.0 BLE transceiver with chip antenna.
Learn more ›
MAXM86161EVSYSAllows for the quick evaluation of the MAXM86161 integrated optical module for applications at various sites on the body, particularly in-ear and mobile applications.
Learn more ›
MAX30205EVSYSIncludes USB-to-I2C controller and GUI program to simplify evaluation
Learn more ›
MAX30001EVSYSOffers several configurations to enable a variety of measurements including ECG, BioZ and Pace Detection.
Learn more ›
MAX86140EVSYSAllows flexible configurations to optimize measurement signal quality with minimal power consumption.
Learn more ›
MAX11205PMB1Interfaces the MAX11205 ultra-low-power, 16-bit ADC to any system that utilizes Pmod-compatible expansion ports configurable for GPIO interface.
Learn more ›
MAXREFDES131Sensing solution featuring the Panasonic AMG8833 Grid-EYE® and the Maxim 1-Wire® bus, enabled by the DS28E17.
Learn more ›
MAXREFDES130Arduino form-factor, Mbed™-enabled shield, includes 0VDC-10VDC analog outputs, 4–20mA input/output, latching/nonlatching relays, RTC, and 1–Wire master.
Learn more ›
Microsoft Word - MAX44000PMB1-quick-start_gs2.docx,MAX44000PMB1Ambient and Infrared Proximity Sensor Peripheral Module
Learn more ›
MAXREFDES72Arduino to Pmod shield with integrated level-shifting and pin-multiplexing.
Learn more ›
MAXREFDES99Arduino form-factor shield daisy-chains four MAX7219 LED drivers to drive a 16x16 LED array for signage applications.
Learn more ›
MAXREFDES89Mbed-compatible, Arduino form-factor shield for brushed DC motor applications. Drives up to 4 motors with current regulation while operating from a single 7V to 36V power supply.
Learn more ›
MAXREFDES132A platform for interfacing with 1-Wire® devices, 1-Wire evaluation kits (EV kits), and iButton® devices.
Learn more ›
MAXREFDES143Demonstrates an authenticated data chain from a protected sensor node to a web server.
Learn more ›
MAX32625PICOPower-optimized Arm® Cortex®-M4F. On-board PMIC provides all necessary voltages. Ultra-compact 0.6in x 1.0in dual-row header footprint.
Learn more ›
MAX32630FTHRPower-optimized Arm® Cortex®-M4F. Optimal Peripheral Mix Provides Platform Scalability. On-Board Bluetooth® 4.0 BLE Transceiver with Chip Antenna.
Learn more ›
DS28E38EVKIT ECDSA asymmetric authentication with ChipDNA PUF protection and 2Kb user EEPROM.
Learn More ›
MAX66242EVKITIncludes ISO 15693, I2C, SHA-256 tag/transponder with 4Kb user EEPROM, RF/I2C interface and energy harvesting.
Learn More ›
MAXREFDES120Compact 24V input module with secondary-side synchronous MOSFET driver that features 5V at 2.5A output.
Learn more ›
MAXREFDES119Compact 24V input module with secondary-side synchronous MOSFET driver that features 5V at 1.8A output.
Learn more ›
MAX176064.5V to 36V input, high-current driver improves efficiency and thermal management.
Learn more ›
MAX5048CAccepts logic-input signals and drives a large external MOSFET, ideal for high-frequency switchers.
Learn more ›
MAX17600Fast switching time with short propagation delay, ideal for high-frequency circuits.
Learn more ›
MAX17301XEVKITEvaluates 1-cell ModelGauge m5 EZ pack-side fuel gauges with protector and SHA-256 authentication.
Learn more ›
MAX17260XEVKITEvaluates the stand-alone
ModelGauge™ m5 host-side fuel-gauge
ICs for lithium-ion (Li+) batteries in
handheld and portable equipment.
Learn more ›
MAX17261XEVKITMonitors a multiple-series cell battery
pack with an external resistor divider.
Learn more ›
MAX20075Synchronous buck with integrated high-side and low-side switches delivers up to 0.6A from 3.5V to 36V input, while using only 3.5µA quiescent current at no load.
Learn more ›
DS3231MPMB1Interfaces the DS3231M RTC low-cost and extremely accurate RTC to any system that utilizes Pmod™-compatible expansion ports configurable for I²C.
Learn more ›
MAX31856EVSYSIncludes MAX31856PMB1 peripheral module, adaptor board for communication with the software and K-type thermocouple.
Learn more ›
MAX20087Dual/quad camera power protector ICs deliver up to 600mA load current to each of their four output channels.
Learn more ›
MAX31875EVKITIncludes GUI that provides communication over I2C with an on-board master IC.
Learn more ›
DS3900P2EVKITProvides bidirectional communication with 2-wire and 3-wire devices using a PC's serial port to evaluate a wide variety of ICs.
Learn more ›
MAX200192.2MHz and 3.2MHz dual step-down converters with integrated high-side and low-side MOSFETs.
Learn more ›
MAX20014OUT1 boosts the input supply up to 8.5V at up to 750mA, while two synchronous step-down converters operate from a 3.0V to 5.5V input voltage range and provides a 0.8V to 3.8V output voltage range at up to 3A.
Learn more ›
MAX20076Synchronous buck with integrated high-side and low-side switches delivers up to 0.6A from 3.5V to 36V input, while using only 3.5µA quiescent current at no load.
Learn more ›
MAX77950EVKITWireless power receiver that operates using near-field magnetic induction when coupled with a WPC or PMA transmitter and provides output power up to 12 watts.
Learn more ›
MAXM15462EVKITIntegrated power solution providing 3.3V from a wide input range of 4.5V to 42V with up to 300mA of current.
Learn more ›
MAXM17532The MAXM17532 is a step-down DC-DC power module built in a compact uSLICTM package. The MAXM17532 integrates a controller, MOSFETs, an inductor, as well as the compensation components. The device operates from an input voltage of 4.0V to 42V, supports an adjustable output voltage from 0.9V to 5.5V, and supplies up to 100mA of load current. The high level of integration significantly reduces design complexity, manufacturing risks and offers a true “plug and play” power supply solution, hence reducing the time-to-market.
MAXM17532EVKITIntegrated power solution providing 5V from a wide input range of 10V to 42V with up to 100mA of current.
Learn more ›
MAX32620FTHRMbed-enabled development platform for the MAX32620 ultra-low-power microcontroller. On-board PMIC, fuel gauge, peripherals, and Pmod™ connectors enable rapid development with a small 0.9in x 2.0in board.
MAXM17575EVKITIntegrated power solution providing 5V from a wide input range of 7.5V to 60V with up to 1.5A of current.
Learn more ›
MAXM17761EVKITIntegrated power solution providing 5V from a wide input range of 4.5V to 76V with up to 1A of current.
Learn more ›
MAXM17574EVKITIntegrated power solution providing 5V from a wide input range of 10V to 60V with up to 3.0A of current.
Learn more ›
MAX17048EVKITSmallest, lowest power fuel gauge with proven, voltage-only ModelGauge algorithm.
Learn more ›
MAXAUTHDEMOHardware/software platform that demonstrates the functional capabilities of Maxim's Secure Authenticators in genuine use-case scenarios.
Learn more ›
MAX17201GEVKITOffers nonvolatile memory (NVM) for pack-side, single-cell or multi-cell applications.
Learn more ›
MAX17055XEVKITCombines coulomb counting and voltage fuel gauging for highest SOC accuracy.
Learn more ›
MAXREFDES74Performs High-Speed, Precision Data Acquisition with High-Accuracy, Low-Power Data Converters.
Learn more ›
MAXM17503EVKITIntegrated power solution providing 5V from a wide input range of 11V to 60V with up to 2.5A of current.
Learn more ›
MAXM17502EVKITProvides 5V from a 12V to 60V input and delivers up to 1A at over 84% efficiency.
Learn more ›
MAX1510EVKITEvaluates the Low-Voltage DDR Linear Regulator
Learn more ›
MAX17651EVKITDemonstrates the 60V, 100mA, Ultra-Low Quiescent Current, Linear Regulator
Learn more ›
MAXREFDES61Complete Analog Front-End for Next-Gen Ultra-Small PLCs with Isolated Power and Data.
Learn more ›
MAXREFDES93.3V to 15V Input, ±15V (±12V) Output Isolated Power for Industrial and Medical Applications
Learn more ›
MAXM17515EVKITProvides 1.5V from a 2.4V to 5.5V input and delivers up to 1.5A at over 91% efficiency.
Learn more ›
MAX32620-EVKITPower-optimized Arm® Cortex®-M4F. Optimal peripheral mix provides platform scalability. On-board bluetooth® 4.0 BLE transceiver with chip antenna.
MAX30034EVKITFully tested board includes MAX30034 to absorb repetitive defibrillation and other high-energy pulses.
Learn more ›
MAX32600MBEDMbed™-enabled evaluation system for the MAX32600 ultra-low-power micro with advanced analog features and hardware security. Arduino connectors and prototyping space enable rapid development.
Learn more ›
MAXQ1061 Evaluation Kit - Evaluates: MAXQ1061Credit card-sized socketed board allows for communication and power through a 10-pin connector to an optional host adapter.
Learn more ›
MAXREFDES82Industrial sensor displays weight and center of mass for objects placed on the platform, up to 780g.
Learn more ›
MAXREFDES73GSR measurement detects human skin impedance under different situations.
Learn more ›
MAX2667EVKITLowest noise figure GPS LNA delivers high gain and high linearity in a tiny package.
Learn more ›
MAX44298EVKITAssesses the MAX44298 precision power monitor with very low offset for low-side monitoring.
Learn more ›
MAX2679/MAX2679B EV Kits - Evaluates: MAX2679/MAX2679BEnables testing of RF performance with no additional circuitry. Provides 50Ω SMA connectors for inputs and outputs.
Learn more ›
MAX2615High-performance broadband amplifier with exceptional gain flatness in an 8-pin TDFN.
Learn more ›
MAXREFDES155Secures IoT systems with a public-key-based authenticated data chain from a protected sensor node to a web server.
MAXREFDES75High-accuracy weigh scale reference design performs small-signal 24-bit measurements, and produces a weighted 0 to 10V output proportional to the input signal.
Learn more ›
MAX44284EVKITDemonstrates the high-precision real-time current monitoring of the MAX44284 current-sense amplifier.
Learn more ›
MAXREFDES70Low-power, ultrasonic time-of-flight reference design for high-accuracy liquid flow measurement.
Learn more ›
MAX32630FTHRMbed-enabled development platform for the MAX32630 ultra-low-power microcontroller. On-board PMIC, Bluetooth, and peripherals enable rapid development with a small 0.9in x 2.0in board.
Learn more ›
MAXREFDES100mbed™-enabled sensor platform for rapid evaluation of wearable health and fitness solutions. Measures motion, temperature, biopotential, pulse oximetry, and heart rate.
Learn more ›
MAXREFDES15Ultra-low power, high-accuracy loop-powered sensor transmitter that connects to any standard PT1000 resistance sensor and converts the linearized temperature to a 4–20mA current signal.
Learn more ›
MAXREFDES162-wire, loop-powered smart temperature transmitter solution for temperature measurement. Works with any type of RTD, from PT100 to PT1000.
Learn more ›
MAXREFDES121Isolated, industrial power-supply reference design with an efficient active-clamp topology design with 24V input.
Learn more ›
MAXREFDES38High-accuracy analog front-end for ECT/EPT low-power sensors to increase precision of grid health data and fault location.
Learn more ›
MAXREFDES67Universal analog input accepts analog voltage and current, all RTD configurations and thermocouples to collect high-accuracy analog data using a single architecture.
Learn more ›
MAXREFDES150Industry 4.0, the fourth revolution in manufacturing and process automation, poses a considerable challenge for PLC design engineers who are required to pack more functionality into enclosures that keep getting smaller.
Learn more ›
MAXREFDES113Compact, 24V input, flyback converter module with 12V at 1.6A output and pre-qualified transformers.
Learn more ›
MAXREFDES125High-efficiency, 20W power supply for industrial and broad power-supply applications.
Learn more ›
MAXREFDES114Compact, 24V input, forward converter module with 5V at 2A output and pre-qualified transformers.
Learn more ›
MAXREFDES117A low power, optical heart-rate module complete with integrated red and IR LEDs, and a power supply.
Learn more ›
MAXREFDES77Interfaces the MAX44285 dual-channel high-side current-sense amplifier to any system that utilizes Pmod™-compatible expansion ports.
Learn more ›
MAXREFDES98This non-isolated PoE powered device design combines a PD controller and buck converter on a 1.2 in2 board. It accepts 36V to 57V input with 5V output up to 2.5A.
Learn more ›
MAXREFDES39This design uses a MAX11300 programmable mixed-signal I/O (PIXI™), to bias and monitor a power amplifier for an RF base station.
Learn more ›
MAXREFDES36This IO-Link® 16-channel digital input reference design includes a 16-bit micro with IO-Link device stack and fits on a small 53.75mm x 72mm PCB.
Learn more ›
MAXREFDES150Integrates 30 industrial IOs for lower heat dissipation and faster throughput in less than ten cubic inches.
Learn more ›
MAXREFDES44Protects IP and authenticates peripherals to Xilinx Zynq™ FPGAs.
Learn more ›
MAXREFDES34 (Alcatraz)This design implements SHA-256 authentication function using the 1-Wire protocol.
Learn more ›
MAXREFDES108This non-isolated PoE powered device design combines a PD controller and buck converter on a 1.2 in2 board. It accepts 36V to 57V input with 12V output up to 1A.
Learn more ›
MAXREFDES111Industrial power-supply reference design features an efficient flyback topology with 24V input, and a 5V output at 2W of power (0.4A)
Learn more ›
MAXREFDES82Operates as Both a Weigh Scale and a Touch Interface with Force Sensing for Industrial Applications.
Learn more ›
MAXREFDES31 (Pasadena)This design is an IEEE 802.3af/at compliant. Powered Device (PD). In addition to regulating power received over Ethernet, device can also be powered from a wall adapter.
Learn more ›
MAXREFDES794-Port IO-Link Master Reference Design
Description: Four IO-Link ports allow for simultaneous testing of four different sensors or actuators.
Learn more ›
MAX9867Includes stereo differential microphone inputs integrated with an auxiliary battery-measurement ADC and capacitorless headphone amps.
Learn more ›
MAX98502Operates at 2MHz and delivers constant 2.2W output power without collapsing battery.
Learn more ›
MAX30102Pulse Oximeter and Heart-Rate Biosensor for Wearable Health
Learn more ›
MAX8808X/Y/ZSimplest and Smallest Charging Solution for Hand-Held Equipment
Learn more ›
MAX77801The MAX77801 is a high-current, high-efficiency buck-boost targeted to mobile applications that use a Li-ion battery or similar chemistries. The MAX77801 utilizes a four-switch H-bridge configuration to support buck and boost operating modes. Buck-boost provides 2.60V to 4.1875V of output voltage range and up to 2A output current.
Learn more ›
MAX14676This battery-charge-management solution includes a linear battery-charger with 28V tolerant input, smart power control, and several power-optimized peripherals. A boost regulator with 5V to 17V output, and 3 programmable current sinks can drive a variety of LED configurations.
Learn more ›
MAX8971This device charges quickly with minimal heat generation. It charges from variety of adapters and maximizes Safety featuring JEITA-compliant temperature monitoring and withstands transient inputs up to 22V.
Learn more ›
MAX17047/MAX17050These battery fuel gauges provide excellent short-term and long-term accuracy by using both coulomb counting and voltage-based ModelGauge algorithms. ModelGauge m3 cancels offset accumulation error in the coulomb counter while providing better short-term accuracy than any purely voltage-based fuel gauge.
Learn more ›
MAX8606This complete 1-cell Li+ battery charge-management IC operates from either a USB port or AC adapter. It integrates a battery disconnect switch, current-sense circuit, PMOS pass element, and thermal-regulation circuitry, while eliminating the external reverse-blocking Schottky diode, to create a simple and small charging solution.
Learn more ›
MAX17048Maximize Battery Run-Time with Industry's Smallest Size, Lowest Power Fuel Gauge
Learn more ›
MAX17055ModelGauge m5 EZ Eliminates Battery Characterization
Learn more ›
MAX17055Low IQ fuel gauge for precision measurements of current, voltage, and temperature.
Learn more ›
MAX20310Wearable Power Management for Single-Cell Zinc Air, Silver Oxide, and Alkaline Battery Architectures
Learn more ›
MAX14690Extends Battery Life of Wearable Electronics
Learn more ›
MAX77950Power receiver IC provides precision output current and voltage-sensing scheme over entire load range.
Learn more ›
DS2465Secure authenticator features 1-Wire master with SHA-256 and memory functionality.
Learn more ›
DS28E15Secure authenticator features factory-programmed, unique 64-bit ROM identification number.
Learn more ›
DS28C36Secure authenticator features true random number generator, secured EEPROM, and ROM ID
Learn more ›
MAX77650PMIC features SIMO buck-boost regulator and a 150mA LDO.
Learn more ›
DS2476Secure ECDSA and HMAC SHA-256 coprocessor companion to the DS28C36.
Learn more ›
MAX77818High-performance companion PMIC with ModelGaugeTM m5 fuel gauge technology.
Learn more ›
MAX7781698% efficiency with I2C interface for single-cell Li-ion battery-powered applications.
MAX7781291% efficiency with 3.4MHz high-speed I2C and 30MHz SPI interface, optimized for single-cell battery-powered applications.
MAX30112Includes 2 LED drivers and 1 photo diode input to enable heart-rate (HR) measurement for wearables.
Learn more ›
MAX30208Repeatability of 0.008°C RMS using a 16-bit sample rate enables clinical-grade accuracy for next-generation wearables.
Learn more ›
MAX31341BOperates at < 180nA to extend battery life in wearables, point-of-sale, and portable systems.
Learn more ›
MAX30001Ultra-low 1.71µVP-P noise floor optimizes sensitive health patch measurements.
Learn more ›
MAX86141Leading-edge HIR/HRV and activity classification algorithms for high-intensity outdoor environments.
Learn more ›
MAX25610A/MAX25610B Automotive-grade LED drivers with integrated MOSFETs and internal current sense drive up to 3A LED.
Learn more ›
MAX25600Provides seamless transition between buck, buck-boost, and boost modes to drive wide range of LEDs with up to 95% efficiency.
Learn more ›
MAX25611A/B/C/D5V to 36V VIN, up to+65V boost output, support multiple configurations for front-end lighting and other LED applications.
Learn more ›
MAX3051Ideal for +3.3V applications that do not require automotive-level fault protection
Learn more ›
MAX13054AIntegrated protection and multi-function STBY pin for three modes of operation
Learn more ›
MAX14878Enables robust communication and safety by integrating up to 5kVRMS (60s) galvanic isolation
Learn more ›
MAX86160Includes 2 LEDs (IR, Green), photo diode, and AFE in a 4.3mm x 2.8mm x 1.45mm optical module for in-ear HR measurement.
Learn more ›
MAX86150Includes 2 LEDs (Red, IR), photo diode, PPG and ECG AFEs to enable ECG, optical HR, and SpO2 measurement.
Learn more ›
MAX30101Includes 3 LEDs (Red, IR, Green), photo diode, and AFE in a 5.6mm x 3.3mm x 1.55mm optical module for HR and SpO2 measurement.
Learn more ›
MAX20097Ultra-fast transient response with near-fixed frequency minimizes EMI for matrix lighting, wide dimming ratio allows high contrast.
Learn more ›
MAX20345Includes 7 ultra-low IQ voltage regulators and a linear battery charger for small Li+ systems.
Learn more ›
MAX20335Includes a linear battery charger with smart power selector and power-optimized peripherals.
Learn more ›
MAX776405.6µA IQ power solution includes 3-channel current sink driver and enables a 16mm2 total solution size.
Learn more ›
MAX77681Always-on, low-power mini PMIC improves battery life by replacing inefficient LDOs and enables 15.5mm2 total solution size.
Learn more ›
MAX20004Integrated MOSFETs with fixed 3.3/5V or programmable 1V to 10V output in 3.75mm x 3.75mm FC2QFN.
Learn more ›
MAX20008Integrated MOSFETs with fixed 3.3/5V or programmable 1V to 10V output in 3.75mm x 3.75mm FC2QFN.
Learn more ›
MAX20098Three frequency modes with fixed 3.3/5V or programmable 1V to 10V output and ±1% accuracy.
Learn more ›
MAX20034Dual controllers operate 180◦ out-of-phase with fixed 3.3/5V or programmable 1V to 10V output and ±1.5% accuracy.
Learn more ›
MAX20006Integrated MOSFETs with fixed 3.3/5V or programmable 1V to 10V output in 3.75mm x 3.75mm FC2QFN.
Learn more ›
MAX77752Highly integrated power management for computationally intensive platforms.
Learn more ›
MAX77714Complete power management IC for portable devices using system-on-chip (SoC) application processors.
Learn more ›
MAX14912/MAX14913Robust 24V driver, capable of 200kHz switching rate
MAX32630Optimal peripheral mix provides platform scalability
Learn more ›
MAX32630/MAX32631The MAX32630/MAX32631 feature an Arm® Cortex®-M4 with FPU CPU that delivers ultra-low power, high-efficiency signal processing functionality with significantly reduced power consumption and ease of use.
MAX22192Enables Up to 50% smaller footprints, 60% lower power dissipation and 6X faster throughput
Learn more ›
MAXM22511Supports 25Mbps data rates while providing 60% DC-DC efficiency and ±35kV electrostatic discharge protection
Learn more ›
MAX14483Each channel optimized for SPI, includes 10ns (typ) propagation delay
Learn more ›
MAXM154620.9V to 5V output with integrated controller, FETs, inductor and compensation in a 2.6mm x 3mm x 1.5mm package
Learn more ›
MAX14819Master transceiver with sensor/actuator power-supply controllers.
MAX14130/MAX14930Allows direct interfacing to 1.8V devices in 6mm x 5mm package
MAXM175740.9V to 15V output with integrated FETs, inductor and compensation in a 9mm x 15mm x 2.92mm SiP package.
Learn more ›
MAXM177610.8V to 5V output with integrated FETs , inductor and compensation in a 6.5mm x 10mm x 2.92mm SiP package.
Learn more ›
DS28E50Simple, cost-effective protection with SHA3-256 crypto engine, ChipDNA secured data, and 2kB EEPROM
Learn more ›
DS28E38Cost-effective protection with ECDSA authentication, ChipDNA secured data, and 2kB EEPROM
Learn more ›
MAX11270The MAX11270 is a 24-bit delta-sigma ADC that achieves excellent 130dB SNR while dissipating an ultra-low 10mW. Sample rates up to 64ksps allow both precision DC and AC measurements. Integral non-linearity is guaranteed to 4ppm maximum.
Learn more ›
MAX19005This four-channel, ultra-low-power, pin-electronics IC includes a two-level pin driver, a window comparator, a passive load, and force-and-sense Kelvin-switched parametric measurement unit (PMU) connections for each channel.
Learn more ›
MAX9967This dual, low-power, high-speed, pin electronics driver/comparator/load (DCL) IC includes, for each channel, a three-level pin driver, a dual comparator, variable clamps, and an active load.
Learn more ›
MAX9979This fully integrated, high-performance, dual-channel pin electronics IC integrates multiple automatic test equipment (ATE) functions into a single IC, including driver/comparator/load (DCL), parametric measurement unit (PMU), and built-in (16-bit) level-setting digital-to-analog converters (DACs).
Learn more ›
MAX11905This ADC provides excellent static and dynamic performance with best-in-class power consumption that directly scales with throughput.
Learn more ›
MAX16813Multi-String Driver Provides High Efficiency and Complete Fault Protection While Minimizing External Components
MAX20078Eliminates the trade-off between fast response time and low EMI for exterior lighting and safety applications.
Learn more ›
MAX17681Provides up to 5W isolated power, reduces power dissipation with > 90% peak efficiency and 0.9µA shutdown current.
Learn more ›
MAX17690Compact, cost-effective, and easy-to-implement isolated DC-DC controller.
Learn more ›
MAX17523Industry's most integrated OCP and OVP solution with more robust reverse current-blocking capability.
Learn more ›
MAX31865Provides 0.5°C total accuracy with fault detection and ±45V input protection
MAX17506Includes integrated high-side MOSFET with output from 0.9V up to 0.9 x VIN in a 5mm x 5mm TQFN
MAX14853Full-duplex, 500kbps RS-485 with ±35kV ESD protection and integrated transformer driver
DS2784This charger delivers a complete fuel-gauging solution in a tiny 15mm2 footprint. It integrates a stand-alone fuel gauge, a single-cell Li+ protector, and a SHA-1-based challenge-response authentication system.
MAX20075Synchronous buck with integrated high-side and low-side switches delivers up to 0.6A from 3.5V to 36V input, while using only 3.5µA quiescent current at no load.
Learn more ›
MAX20087ASIL-grade protector delivers up to 600mA load current to each of four output channels with high-side current limit and I2C diagnostics.
Learn more ›
MAX20019Ultra-small, 3.5V to 17V input, dual regulators includes high-side and low-side MOSFETs and 500mV enable hysteresis.
Learn more ›
MAX30004For wearable applications, especially for chest straps and patches, provides R-R intervals for heart-rate detection.
Learn more ›
MAX30003For wearable applications, provides ECG waveforms and a heart-rate detection algorithm.
Learn more ›
MAX9291/MAX9293Enables use of coax cables, reducing weight and cost of cabling in automotive infotainment.
MAX9288/MAX92903.12Gbps GMSL Deserializers for Coax or STP Input and MIPI CSI-2 Output
MAX96705With crosspoint switch and CRC protection of video and control data for ADAS.
MAX96711With line-fault detection and CRC protection of video and control data for ADAS.
MAXM175750.9V to 12V output with integrated FETs, inductor and compensation in a 6.5mm × 10mm × 2.92mm SiP package.
Learn more ›
MAXM17502Enables cooler, smaller, simpler power-supply solutions.
Learn more ›
MAXM17545Integrates components in a low-profile, thermally efficient, system-in-package (SiP).
Learn more ›
MAXM17516Provides fixed-frequency voltage regulator for space-constrained applications.
Learn more ›
MAXM175320.9V to 5.5V output with integrated controller, FETs, inductor and compensation in a 2.6mm x 3mm x 1.5mm uSLIC package.
Learn more ›
MAX32590High-performance, single-chip secure microcontroller with encrypted external bus and advanced physical security.
MAX11192High-Precision and High Speed for More Accurate Measurements
Learn more ›
MAX30205Clinical-grade temperature sensor offers ±0.1°C accuracy for thermometer applications
Learn more ›
MAX31875Local temperature sensor with ±2°C-accuracy and I2C/SMBus interface
Learn more ›
MAX31856Simplifies thermocouple designs with automatic cold junction compensation and linearization correction
Learn more ›
DS1341RTC with an extremely low standby current, permits longer life from a power supply.
Learn more ›
DS3231Low-cost I²C RTC incorporates a battery input and maintains accurate timekeeping when main power is interrupted.
Learn more ›
DS1308Low-power, full BCD real-time clock and calendar compatible with any 32.768kHz crystal.
Learn more ›
MAX32600-KITThis complete functional system includes a MAX32600 wellness measurement microcontroller, selectable power sources, headers for access to I/O port pins and the AFE, 8-digit LCD display, USB, UART, low-power Bluetooth® transceiver, and general-purpose IO.
MAX32625/MAX32626The MAX32625/MAX32626 feature an Arm® Cortex®-M4 with FPU CPU that delivers high-efficiency signal processing, ultra-low power consumption and ease of use.
MAX32600
MAX32620/MAX32621Ultra-Low Power Cortex-M4F for Wearable Medical and Fitness Applications
MAX8969The MAX8969 is a simple 1A step-up converter in a small package that operates in any single-cell Li-ion application. This IC provides protection features such as input undervoltage lockout, short circuit, and overtemperature shutdown.
MAX32550Secure Cortex-M3 Flash Microcontroller with Secure Boot Loader with PKA
MAX6581This precision multichannel temperature sensor monitors its own temperature and the temperatures of up to seven external diode-connected transistors. All temperature channels have programmable alert and overtemperature thresholds.
MAX30003Secure authenticator features factory-programmed, unique 64-bit ROM identification number.
MAX77596This small, synchronous buck converter with integrated switches can deliver up to 300mA with input voltages from 3.5V to 24V, while using only 1.1μA quiescent current at no load.
MAX9918,MAX9918/MAX9920These ICs are single-supply, high-accuracy current-sense amplifiers with a high input common-mode range that extends from -20V to +75V.
MAX17201/5/11/15This ultra-low power fuel gauge IC with SHA-256 authentication doesn’t require characterization, ideal for pack-side implementation.
MAX2079A fully integrated octal ultrasound receiver is optimized for high channel count, high-performance portable and cart-based ultrasound systems.
MAX2082This fully-integrated octal ultrasound transceiver is optimized for high channel-count, high-performance portable and cart-based ultrasound systems. This transceiver allows the user to achieve high-end 2D and Doppler imaging capability using substantially less space and power.
MAX14808-MAX14809This octal, three-level, digital pulser generates high-frequency, HV bipolar pulses (up to ±105V) from low-voltage control logic inputs for driving piezoelectric transducers in ultrasound systems.
MAX14824This IO-Link master transceiver is integrated with an auxiliary digital input and two linear regulators and is scalable to 16 channels.
MAX17843Programmable ASIL D battery monitor ASIC optimized for automotive, hybrid electric battery pack, and electric vehicle systems.
MAX21001Automotive digital output gyroscope with high accuracy and sensitivity over temperature and time.
MAX1806Delivers Low Input with ±1% Output Voltage Accuracy
Learn more ›
MAX8902Provides High 92dB PSRR at 5kHz for Handheld, Battery-Powered Devices
Learn more ›
MAX8880Delivers Up to 200mA for Battery-Powered Applications
Learn more ›
MAX11168Improves Measurement Quality with True Bipolar Range in a Small Size.
Learn more ›
MAX11410Optimized for Precision Sensor Measurement and More Efficient System Design
Learn more ›
MAX17502FSynchronous operation with internal FETs in 3mm x 2mm TDFN
Design in EE-Sim
MAX17222Delivers 300nA IQ at 95% peak efficiency and reduces solution size by up to 50%
MAX16056125nA Supervisory Circuit with Capacitor-Adjustable Reset and Watchdog Timeouts
MAX77650-MAX77651Highly Integrated with Ultra-Low 6.5µA Operating Current
MAX2078A fully integrated bipolar, high-density octal-channel ultrasound receiver optimized for low cost, high-channel count, high-performance portable and cart-based ultrasound systems.
MAX9617These are zero-drift operational amplifiers available in space-saving SC70 packages. They feature rail-to-rail CMOS inputs and outputs and zero-drift input offset voltage over time and temperature.
MAX1226These are serial 12-bit analog-to-digital converters (ADCs) with an internal reference and an internal temperature sensor plus many additional features.
MAX44284This current-sense amplifier offers precision accuracy specifications of 2µV VOS and gain error of 0.05%. It operates with a 1.7V to 5.5V single supply and is optimized for very low power operation with only 21µA of quiescent current.
Learn more ›
MAX31865Easy-to-use converter features integrated fault detection, high accuracy, and system cost-lowering integration.
MAX30205Sensor accurately measures temperature and provides overtemperature alarm/interrupts/shutdown output.
DS28C22Secure memory features crypto-strong, bidirectional, secure challenge-and-response authentication.
MAX16956Small, synchronous buck converter with integrated high-side and low-side switches.
MAX98091Small, Ultra-Efficient, High-Performance, Stereo Codec with Integrated Headphone and Speaker Amps
MAX77231Compact boost with only 35µVRMS ripple and noise.
MAX17242Reliable Operation (42V Input Transient Protection), Long Battery Life (15µA IQ) and EN55022 EMI Performance.
MAX40000, MAX40001nanoPower Comparators in an Ultra-Tiny 0.76mm x 1.11mm Package
MAX40007Saves Power and Board Space—Consumes Only 700nA in a Tiny, 1.1mm x 0.76mm WLP
MAX16072Space Saving Supervisor with Precision Band-gap Reference, Comparator, and Internally Trimmed Resistors
MAX14850Complete, low-power digital isolation solution with stable high-temp performance
MAX11300Configurable High-Voltage Mixed Signal I/O Device offers 20 mixed-signal high-voltage, bipolar ports configurable as ADC analog input, DAC analog output, a general-purpose input port (GPI) or general-purpose output port (GPO).
Femtocell Radio参考设计该设计中,MAX2550作为主要的射频(RF)收发器，配合必要的外部元件构成完整的射频前端。外部元件包括：功率放大器、双工器、TCXO和无源器件。
MAX31726This IC converts the temperature measurements to digital form using a high-resolution, sigma-delta, analog-to-digital converter (ADC). Accuracy is ±0.5°C from -40°C to +105°C. Communication is through an I2C-compatible 2-wire serial interface.
MAX14870/MAX14872Very low driver on-resistance reduces power dissipation in 3mm x 3mm TDFN-EP
MAX14588Protects against input voltage faults up to ±40V, with 190mΩ RON and integrated FETs
MAX14827Integrates high-voltage functions commonly found in industrial sensors, including drivers and regulators
MAX14830Allows direct interfacing to 1.8V devices in 6mm x 5mm package
MAX31913Robust, low power serialization of 24V digital signals to 5V minimizes optocouplers needed for isolation
MAX14890EFour differential and two single-ended receivers with ±40V fault protection
MAX3109Data rates up to 24Mbps with high-speed SPI or I²C interface
MAX5216Less than 80µA IQ in 3mm x 5mm, 8-Pin µMAX
MAX11254Low power, 1µA Sleep Current and Low Noise, 6.2nV/√Hz PGA
MAX17040/1MAX17040/MAX17041 are ultra-compact, low-cost, host-side fuel-gauge systems for lithium-ion (Li+) batteries in handheld and portable equipment. The MAX17040 is configured to operate with a single lithium cell and the MAX17041 is configured for a dual-cell 2S pack.
MAX17024High efficiency, excellent transient response, and high DC-output accuracy, accepts inputs as low as 2V.
MAX17021/MAX17082/MAX174822/1-phase-interleaved Quick-PWM™ step-down VID power-supply controllers for notebook CPUs.
MAX17020Multipurpose controller configurable for system power, graphics, and memory applications in portables.
