|************************************************************************
| IBIS file 3096.ibs created at Maxim Integrated Products
|************************************************************************
|
[IBIS ver]       2.1
[File name]      3096.ibs
[File Rev]       1.0
[Date]           September 16, 2002 
[Source]         Data was acquired from HSpice simulation and bench 
                 measurements. Rise and fall ramps were taken through 
                 HSpice simulation and IV curves were taken on the bench 
                 using a Semiconductor Parameter Analyzer.
[Notes]          This is an EIA-TIA RS-422/485 Receivers.
[Disclaimer]     Maxim Integrated Products hereby grants the user of this 
                 IBIS model a non-exclusive, nontransferable license to use 
                 this IBIS model under the following terms. Before using 
                 this IBIS model, the user should read this license. If the 
                 user does not accept these terms, the IBIS model should be 
                 returned to Maxim Integrated Products within 30 days. 
                 The user is granted this license only to use the IBIS model 
                 and is not granted rights to sell, load, rent, lease or 
                 license the IBIS model in whole or in part, or in modified 
                 form to anyone other than user. User may modify the IBIS 
                 model to suit its specific applications but rights to 
                 derivative works and such modifications shall belong to 
                 Maxim Integrated Products. This IBIS model is provided on 
                 an "AS IS" basis and Maxim Integrated Products makes 
                 absolutely no warranty with respect to the information 
                 contained herein.MAXIM INTEGRATED PRODUCTS DISCLAIMS AND 
                 CUSTOMER WAIVES ALL WARRANTIES, EXPRESS OR IMPLIED, 
                 INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
                 PARTICULAR PURPOSE. The entire risk as to quality and 
                 performance is with the Customer. ACCORDINGLY, IN NO EVENT  
                 SHALL THE COMPANY BE LIABLE FOR ANY DAMAGES, WHETHER IN 
                 CONTRACT OR TORT,INCLUDING ANY LOST PROFITS OR OTHER 
                 INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, OR PUNITIVE DAMAGES 
                 ARISING OUT OF THE USE OR APPLICATION OF THE IBIS model 
                 provided in this package.Further, Maxim Integrated Products 
                 reserves the right to make changes without notice to any  
                 product herein to improve reliability, function, or design. 
                 Maxim Integrated Products does not convey any license under 
                 patent rights or any other intellectual property rights, 
                 including those of third parties. 
                 Maxim Integrated Products is not obligated to provide 
                 maintenance or support for the licensed IBIS model. 
[Copyright]      Copyright of Maxim Integrated Products. 
|
|************************************************************************
|                            Component MAX3096 
|************************************************************************
|
[Component]      MAX3096
[Manufacturer]   Maxim Integrated Products  
[Package]
| variable       typ                 min                 max
R_pkg            48.852m             45.4m               55.5m
L_pkg            1.8nH               1.57nH              2.187nH
C_pkg            0.319pF             0.252pF             0.419pF
|
[Pin]  signal_name      model_name      R_pin     L_pin     C_pin
1       B1              INAB      
2       A1              INAB
3       Y1              OUTY
4       G               Enable
5       Y2              OUTY
6       A2              INAB
7       B2              INAB
8       GND             GND
9       B3              INAB
10      A3              INAB
11      Y3              OUTY
12      G'              Enable
13      Y4              OUTY
14      A4              INAB
15      B4              INAB
16      VCC             POWER                       
|
|************************************************************************
|                   Driver Receiver Input
|************************************************************************
|
[Model]          INAB
|Signals         A1, A2, A3, A4, B1, B2, B3, B4
Model_type       Input
Vinl = 0.8V
Vinh = 2.0V
C_comp                    0.96pF              0.538pF             1.592pF
[Temperature Range]       25                  -40                 85
[Voltage Range]           3.30V               3.00V               3.60V 
[POWER Clamp Reference]   3.30V               3.00V               3.60V
[GND Clamp Reference]     0.00V               0.00V               0.00V
|
[POWER_clamp]
|-------------------------------------------------------------
| Note that the[POWER_clamp]voltage table is referenced to Vcc
| and is calculated using Vtable=Vcc - Vmeasured.
|-------------------------------------------------------------
| V(V)  I(typ)          I(min)  I(max)
  -0.1	48.370uA	NA	NA
  -0.2	49.849uA	NA	NA
  -0.3	51.343uA	NA	NA
  -0.4	52.835uA	NA	NA
  -0.5	54.327uA	NA	NA
  -0.6	55.807uA	NA	NA
  -0.7	57.300uA	NA	NA
  -0.8	58.790uA	NA	NA
  -0.9	60.271uA	NA	NA
  -1.0	61.764uA	NA	NA
  -1.1	63.255uA	NA	NA
  -1.2	64.747uA	NA	NA
  -1.3	66.230uA	NA	NA
  -1.4	67.717uA	NA	NA
  -1.5	69.212uA	NA	NA
  -1.6	70.693uA	NA	NA
  -1.7	72.184uA	NA	NA
  -1.8	73.677uA	NA	NA
  -1.9	75.169uA	NA	NA
  -2.0	76.650uA	NA	NA
  -2.1	78.141uA	NA	NA
  -2.2	79.635uA	NA	NA
  -2.3	81.115uA	NA	NA
  -2.4	82.609uA	NA	NA
  -2.5	84.097uA	NA	NA
  -2.6	85.591uA	NA	NA
  -2.7	87.071uA	NA	NA
  -2.8	88.564uA	NA	NA
  -2.9	90.056uA	NA	NA
  -3.0	91.537uA	NA	NA
  -3.1	93.032uA	NA	NA
  -3.2	94.524uA	NA	NA
  -3.3	96.005uA	NA	NA
|            
[GND_clamp]
|-------------------------------------------------------------
| Note that the[GND_clamp]voltage table is referenced to Gnd. 
|-------------------------------------------------------------
| V(V)  I(typ)          I(min)  I(max)
  -3.3	-51.528uA	NA	NA
  -3.2	-50.049uA	NA	NA
  -3.1	-48.553uA	NA	NA
  -3.0	-47.061uA	NA	NA
  -2.9	-45.569uA	NA	NA
  -2.8	-44.086uA	NA	NA
  -2.7	-42.595uA	NA	NA
  -2.6	-41.103uA	NA	NA
  -2.5	-39.610uA	NA	NA
  -2.4	-38.130uA	NA	NA
  -2.3	-36.636uA	NA	NA
  -2.2	-35.146uA	NA	NA
  -2.1	-33.665uA	NA	NA
  -2.0	-32.173uA	NA	NA
  -1.9	-30.680uA	NA	NA
  -1.8	-29.187uA	NA	NA
  -1.7	-27.705uA	NA	NA
  -1.6	-26.214uA	NA	NA
  -1.5	-24.721uA	NA	NA
  -1.4	-23.240uA	NA	NA
  -1.3	-21.747uA	NA	NA
  -1.2	-20.254uA	NA	NA
  -1.1	-18.761uA	NA	NA
  -1.0	-17.279uA	NA	NA
  -0.9	-15.783uA	NA	NA
  -0.8	-14.290uA	NA	NA
  -0.7	-12.797uA	NA	NA
  -0.6	-11.314uA	NA	NA
  -0.5	-9.8202uA	NA	NA
  -0.4	-8.3250uA	NA	NA
  -0.3	-6.8407uA	NA	NA
  -0.2	-5.3456uA	NA	NA
  -0.1	-3.8490uA	NA	NA
  0.0	-2.3524uA	NA	NA
  0.1	-867.37nA	NA	NA
  0.2	629.90nA	NA	NA
  0.3	2.1269uA	NA	NA
  0.4	3.6248uA	NA	NA
  0.5	5.1094uA	NA	NA
  0.6	6.6072uA	NA	NA
  0.7	8.1046uA	NA	NA
  0.8	9.5904uA	NA	NA
  0.9	11.0873uA	NA	NA
  1.0	12.586uA	NA	NA
  1.1	14.070uA	NA	NA
  1.2	15.569uA	NA	NA
  1.3	17.063uA	NA	NA
  1.4	18.559uA	NA	NA
  1.5	20.046uA	NA	NA
  1.6	21.538uA	NA	NA
  1.7	23.033uA	NA	NA
  1.8	24.519uA	NA	NA
  1.9	26.011uA	NA	NA
  2.0	27.506uA	NA	NA
  2.1	29.002uA	NA	NA
  2.2	30.485uA	NA	NA
  2.3	31.976uA	NA	NA
  2.4	33.470uA	NA	NA
  2.5	34.955uA	NA	NA
  2.6	36.446uA	NA	NA
  2.7	37.938uA	NA	NA
  2.8	39.435uA	NA	NA
  2.9	40.917uA	NA	NA
  3.0	42.410uA	NA	NA
  3.1	43.902uA	NA	NA
  3.2	45.385uA	NA	NA
  3.3	46.875uA	NA	NA
|
| End [Model] INAB 
|
|****************************************************************************
|                   Driver Enable Input 
|****************************************************************************
|
[Model]          Enable
|Signals         G, G'
Model_type       Input
Vinl = 0.8V
Vinh = 2.0V
C_comp                    0.96pF              0.538pF             1.592pF
[Temperature Range]       25                  -40                 85
[Voltage Range]           3.30V               3.00V               3.60V 
[POWER Clamp Reference]   3.30V               3.00V               3.60V
[GND Clamp Reference]     0.00V               0.00V               0.00V
|
[POWER_clamp]
|-------------------------------------------------------------
| Note that the[POWER_clamp]voltage table is referenced to Vcc
| and is calculated using Vtable=Vcc - Vmeasured.
| Also, the Semiconductor Parameter Analyzer (Force and Sense) 
| clamps the supply current to 100mA to protect the system.
|-------------------------------------------------------------
| V(V)  I(typ)         I(min)  I(max)
  -0.1	0A              NA      NA
  -0.2	0A              NA      NA
  -0.3	195.72pA	NA	NA
  -0.4	8.9933nA	NA	NA
  -0.5	438.16nA	NA	NA
  -0.6	18.196uA	NA	NA
  -0.7	328.33uA	NA	NA
  -0.8	2.5377mA	NA	NA
  -0.9	10.9055mA	NA	NA
  -1.0	25.806mA	NA	NA
  -1.1	44.295mA	NA	NA
  -1.2	64.677mA	NA	NA
  -1.3	85.996mA	NA	NA
  -1.4	100.000mA	NA	NA
  -3.3	100.000mA	NA	NA
|            
[GND_clamp]
|-------------------------------------------------------------
| Note that the[GND_clamp]voltage table is referenced to Gnd. 
| Also, the Semiconductor Parameter Analyzer (Force and Sense) 
| clamps the supply current to 100mA to protect the system.
|-------------------------------------------------------------
| V(V)  I(typ)          I(min)  I(max)
  -3.3	-100.000mA	NA	NA
  -1.4	-100.000mA	NA	NA
  -1.3	-94.536mA	NA	NA
  -1.2	-70.347mA	NA	NA
  -1.1	-47.844mA	NA	NA
  -1.0	-28.165mA	NA	NA
  -0.9	-12.717mA	NA	NA
  -0.8	-3.6414mA	NA	NA
  -0.7	-557.32uA	NA	NA
  -0.6	-47.494uA	NA	NA
  -0.5	-8.4073uA	NA	NA
  -0.4	-1.9021uA	NA	NA
  -0.3	-112.93nA	NA	NA
  -0.2	-2.5697nA	NA	NA
  -0.1	-53.05pA	NA	NA
  0.0	-2.22pA         NA      NA
  0.1	-1.22pA         NA      NA
  0.2	0A              NA      NA
  3.3	0A              NA      NA
|
|End [Model] Enable
|
|****************************************************************************
|                  Driver Receiver Output 
|****************************************************************************
|
[Model]          OUTY
|Signals         Y1, Y2, Y3, Y4
Model_type       3-state
Polarity         Non-Inverting
C_comp                    0.96pF               0.538pF            1.592pF
[Temperature Range]       25                  -40                 85
[Voltage Range]           3.30V                3.00V              3.60V
[Pullup Reference]        3.30V                3.00V              3.60V
[Pulldown Reference]      0.00V                0.00V              0.00V
[POWER Clamp Reference]   3.30V                3.00V              3.60V
[GND Clamp Reference]     0.00V                0.00V              0.00V
|
[Pullup]
|-------------------------------------------------------------
| Note that the[Pulldown]voltage table is referenced to Vcc
| and is calculated using Vtable=Vcc - Vmeasured.
| Also, the Semiconductor Parameter Analyzer (Force and Sense)
| clamps the supply current to 100mA to protect the system.
|-------------------------------------------------------------
| V(V)  I(typ)          I(min)  I(max)
  6.6	-100.000mA	NA	NA
  5.2	-100.000mA	NA	NA
  5.1	-97.613mA	NA	NA
  5.0	-89.696mA	NA	NA
  4.9	-79.490mA	NA	NA
  4.8	-72.065mA	NA	NA
  4.7	-64.755mA	NA	NA
  4.6	-57.138mA	NA	NA
  4.5	-49.392mA	NA	NA
  4.4	-41.614mA	NA	NA
  4.3	-33.966mA	NA	NA
  4.2	-26.516mA	NA	NA
  4.1	-19.832mA	NA	NA
  4.0	-15.362mA	NA	NA
  3.9	-13.960mA	NA	NA
  3.8	-13.443mA	NA	NA
  3.7	-13.189mA	NA	NA
  3.6	-13.083mA	NA	NA
  3.5	-13.012mA	NA	NA
  3.4	-12.945mA	NA	NA
  3.3	-12.870mA	NA	NA
  3.2	-12.795mA	NA	NA
  3.1	-12.718mA	NA	NA
  3.0	-12.635mA	NA	NA
  2.9	-12.551mA	NA	NA
  2.8	-12.463mA	NA	NA
  2.7	-12.369mA	NA	NA
  2.6	-12.272mA	NA	NA
  2.5	-12.169mA	NA	NA
  2.4	-12.057mA	NA	NA
  2.3	-11.935mA	NA	NA
  2.2	-11.801mA	NA	NA
  2.1	-11.649mA	NA	NA
  2.0	-11.476mA	NA	NA
  1.9	-11.275mA	NA	NA
  1.8	-11.045mA	NA	NA
  1.7	-10.776mA	NA	NA
  1.6	-10.470mA	NA	NA
  1.5	-10.129mA	NA	NA
  1.4	-9.7482mA	NA	NA
  1.3	-9.3218mA	NA	NA
  1.2	-8.8508mA	NA	NA
  1.1	-8.3425mA	NA	NA
  1.0	-7.7880mA	NA	NA
  0.9	-7.1920mA	NA	NA
  0.8	-6.5576mA	NA	NA
  0.7	-5.8783mA	NA	NA
  0.6	-5.1565mA	NA	NA
  0.5	-4.3941mA	NA	NA
  0.4	-3.5962mA	NA	NA
  0.3	-2.7532mA	NA	NA
  0.2	-1.8683mA	NA	NA
  0.1	-953.80uA	NA	NA
  0.0	9.2607uA	NA	NA
  -0.1	1.0118mA	NA	NA
  -0.2	2.0453mA	NA	NA
  -0.3	3.1274mA	NA	NA
  -0.4	4.2494mA	NA	NA
  -0.5	5.4187mA	NA	NA
  -0.6	6.6670mA	NA	NA
  -0.7	8.5567mA	NA	NA
  -0.8	13.924mA	NA	NA
  -0.9	25.297mA	NA	NA
  -1.0	41.129mA	NA	NA
  -1.1	59.583mA	NA	NA
  -1.2	79.779mA	NA	NA
  -1.3	100.000mA	NA	NA
  -3.3	100.000mA	NA	NA

|
[Pulldown]
|-------------------------------------------------------------
| Note that the[Pulldown]voltage table is referenced to Gnd.
| Also, the Semiconductor Parameter Analyzer (Force and Sense) 
| clamps the supply current to 100mA to protect the system.
|-------------------------------------------------------------
| V(V)  I(typ)          I(min)  I(max)
  -3.3	-100.000mA	NA	NA
  -2.1	-100.000mA	NA	NA
  -2.0	-99.702mA	NA	NA
  -1.9	-88.018mA	NA	NA
  -1.8	-80.780mA	NA	NA
  -1.7	-73.374mA	NA	NA
  -1.6	-65.777mA	NA	NA
  -1.5	-58.120mA	NA	NA
  -1.4	-50.498mA	NA	NA
  -1.3	-42.917mA	NA	NA
  -1.2	-35.614mA	NA	NA
  -1.1	-29.031mA	NA	NA
  -1.0	-24.080mA	NA	NA
  -0.9	-20.893mA	NA	NA
  -0.8	-18.312mA	NA	NA
  -0.7	-15.845mA	NA	NA
  -0.6	-13.445mA	NA	NA
  -0.5	-11.080mA	NA	NA
  -0.4	-8.7631mA	NA	NA
  -0.3	-6.5087mA	NA	NA
  -0.2	-4.2882mA	NA	NA
  -0.1	-2.1228mA	NA	NA
  0.0	-14.648uA	NA	NA
  0.1	2.0168mA	NA	NA
  0.2	3.9990mA	NA	NA
  0.3	5.9106mA	NA	NA
  0.4	7.7499mA	NA	NA
  0.5	9.4957mA	NA	NA
  0.6	11.1746mA	NA	NA
  0.7	12.767mA	NA	NA
  0.8	14.256mA	NA	NA
  0.9	15.659mA	NA	NA
  1.0	16.966mA	NA	NA
  1.1	18.159mA	NA	NA
  1.2	19.250mA	NA	NA
  1.3	20.236mA	NA	NA
  1.4	21.106mA	NA	NA
  1.5	21.860mA	NA	NA
  1.6	22.505mA	NA	NA
  1.7	23.039mA	NA	NA
  1.8	23.471mA	NA	NA
  1.9	23.813mA	NA	NA
  2.0	24.084mA	NA	NA
  2.1	24.293mA	NA	NA
  2.2	24.459mA	NA	NA
  2.3	24.598mA	NA	NA
  2.4	24.715mA	NA	NA
  2.5	24.816mA	NA	NA
  2.6	24.908mA	NA	NA
  2.7	24.991mA	NA	NA
  2.8	25.068mA	NA	NA
  2.9	25.139mA	NA	NA
  3.0	25.205mA	NA	NA
  3.1	25.267mA	NA	NA
  3.2	25.327mA	NA	NA
  3.3	25.384mA	NA	NA
  3.4	25.441mA	NA	NA
  3.5	25.492mA	NA	NA
  3.6	25.541mA	NA	NA
  3.7	25.592mA	NA	NA
  3.8	25.641mA	NA	NA
  3.9	25.797mA	NA	NA
  4.0	27.194mA	NA	NA
  4.1	33.595mA	NA	NA
  4.2	46.233mA	NA	NA
  4.3	62.886mA	NA	NA
  4.4	81.923mA	NA	NA
  4.5	100.000mA	NA	NA
  6.6	100.000mA	NA	NA
|
[POWER_clamp]
|-------------------------------------------------------------
| Note that the[POWER_clamp]voltage table is referenced to Vcc
| and is calculated using Vtable=Vcc - Vmeasured.
| Also, the Semiconductor Parameter Analyzer (Force and Sense) 
| clamps the supply current to 100mA to protect the system.
|-------------------------------------------------------------
| V(V)  I(typ)         I(min)  I(max)
  6.6	-100.000mA	NA	NA
  5.3	-100.000mA	NA	NA
  5.2	-92.887mA	NA	NA
  5.1	-85.148mA	NA	NA
  5.0	-77.248mA	NA	NA
  4.9	-66.937mA	NA	NA
  4.8	-59.590mA	NA	NA
  4.7	-52.218mA	NA	NA
  4.6	-44.524mA	NA	NA
  4.5	-36.702mA	NA	NA
  4.4	-28.842mA	NA	NA
  4.3	-21.101mA	NA	NA
  4.2	-13.558mA	NA	NA
  4.1	-6.7442mA	NA	NA
  4.0	-2.1315mA	NA	NA
  3.9	-701.85uA	NA	NA
  3.8	-236.67uA	NA	NA
  3.7	-40.813uA	NA	NA
  3.6	-1.9719uA	NA	NA
  3.5	-44.780nA	NA	NA
  3.4	-911.50pA	NA	NA
  3.3	-1.04pA         NA      NA
  3.2	17.66pA         NA      NA
  3.1	18.50pA         NA      NA
  3.0	19.05pA         NA      NA
  2.9	18.06pA         NA      NA
  2.8	19.62pA         NA      NA
  2.7	19.14pA         NA      NA
  2.6	20.22pA         NA      NA
  2.5	19.56pA         NA      NA
  2.4	20.44pA         NA      NA
  2.3	20.15pA         NA      NA
  2.2	19.32pA         NA      NA
  2.1	21.79pA         NA      NA
  2.0	20.45pA         NA      NA
  1.9	20.06pA         NA      NA
  1.8	20.75pA         NA      NA
  1.7	20.55pA         NA      NA
  1.6	21.78pA         NA      NA
  1.5	21.56pA         NA      NA
  1.4	21.29pA         NA      NA
  1.3	21.81pA         NA      NA
  1.2	21.54pA         NA      NA
  1.1	21.07pA         NA      NA
  1.0	22.83pA         NA      NA
  0.9	21.90pA         NA      NA
  0.8	22.73pA         NA      NA
  0.7	21.78pA         NA      NA
  0.6	22.04pA         NA      NA
  0.5	21.69pA         NA      NA
  0.4	22.11pA         NA      NA
  0.3	21.26pA         NA      NA
  0.2	22.42pA         NA      NA
  0.1	22.23pA         NA      NA
  0.0	22.08pA         NA      NA
  -0.1	24.24pA         NA      NA
  -0.2	90.34pA         NA      NA
  -0.3	3.1982nA	NA	NA
  -0.4	147.64nA	NA	NA
  -0.5	6.1284uA	NA	NA
  -0.6	142.66uA	NA	NA
  -0.7	1.7305mA	NA	NA
  -0.8	8.6812mA	NA	NA
  -0.9	21.806mA	NA	NA
  -1.0	38.838mA	NA	NA
  -1.1	58.186mA	NA	NA
  -1.2	79.057mA	NA	NA
  -1.3	100.000mA	NA	NA
  -3.3	100.000mA	NA	NA
|            
[GND_clamp]
|-------------------------------------------------------------
| Note that the[GND_clamp]voltage table is referenced to Gnd. 
| Also, the Semiconductor Parameter Analyzer (Force and Sense) 
| clamps the supply current to 100mA to protect the system.
|-------------------------------------------------------------
| V(V)  I(typ)          I(min)  I(max)
  -3.3	-100.000mA	NA	NA
  -2.0	-100.000mA	NA	NA
  -1.9	-92.887mA	NA	NA
  -1.8	-85.148mA	NA	NA
  -1.7	-77.248mA	NA	NA
  -1.6	-66.937mA	NA	NA
  -1.5	-59.590mA	NA	NA
  -1.4	-52.218mA	NA	NA
  -1.3	-44.524mA	NA	NA
  -1.2	-36.702mA	NA	NA
  -1.1	-28.842mA	NA	NA
  -1.0	-21.101mA	NA	NA
  -0.9	-13.558mA	NA	NA
  -0.8	-6.7442mA	NA	NA
  -0.7	-2.1315mA	NA	NA
  -0.6	-701.85uA	NA	NA
  -0.5	-236.67uA	NA	NA
  -0.4	-40.813uA	NA	NA
  -0.3	-1.9719uA	NA	NA
  -0.2	-44.780nA	NA	NA
  -0.1	-911.50pA	NA	NA
  0.0	-1.04pA         NA      NA
  0.1	17.66pA         NA      NA
  0.2	18.50pA         NA      NA
  0.3	19.05pA         NA      NA
  0.4	18.06pA         NA      NA
  0.5	19.62pA         NA      NA
  0.6	19.14pA         NA      NA
  0.7	20.22pA         NA      NA
  0.8	19.56pA         NA      NA
  0.9	20.44pA         NA      NA
  1.0	20.15pA         NA      NA
  1.1	19.32pA         NA      NA
  1.2	21.79pA         NA      NA
  1.3	20.45pA         NA      NA
  1.4	20.06pA         NA      NA
  1.5	20.75pA         NA      NA
  1.6	20.55pA         NA      NA
  1.7	21.78pA         NA      NA
  1.8	21.56pA         NA      NA
  1.9	21.29pA         NA      NA
  2.0	21.81pA         NA      NA
  2.1	21.54pA         NA      NA
  2.2	21.07pA         NA      NA
  2.3	22.83pA         NA      NA
  2.4	21.90pA         NA      NA
  2.5	22.73pA         NA      NA
  2.6	21.78pA         NA      NA
  2.7	22.04pA         NA      NA
  2.8	21.69pA         NA      NA
  2.9	22.11pA         NA      NA
  3.0	21.26pA         NA      NA
  3.1	22.42pA         NA      NA
  3.2	22.23pA         NA      NA
  3.3	22.08pA         NA      NA
  3.4	24.24pA         NA      NA
  3.5	90.34pA         NA      NA
  3.6	3.1982nA	NA	NA
  3.7	147.64nA	NA	NA
  3.8	6.1284uA	NA	NA
  3.9	142.66uA	NA	NA
  4.0	1.7305mA	NA	NA
  4.1	8.6812mA	NA	NA
  4.2	21.806mA	NA	NA
  4.3	38.838mA	NA	NA
  4.4	58.186mA	NA	NA
  4.5	79.057mA	NA	NA
  4.6	100.000mA	NA	NA
  6.6	100.000mA	NA	NA
|
[Ramp]
| variable       typ                min                 max
dV/dt_r          1.94134/4.3128n    1.74787/5.9171n     2.13227/2.9831n
dV/dt_f          1.97668/3.364n     1.79041/4.4485n     2.16196/2.2927n
R_load = 5Kohms
|
|End [Model] OUTY
|
|End [Component] MAX3096 
|
[End]