回到顶部

远端/本地温度传感器,带有SMBus串行接口

新设计推荐使用MAX1617A

产品详情

主要特征

应用/用途

简化框图

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

主要特征

  • Two Channels: Measures Both Remote and Local Temperatures
  • No Calibration Required
  • SMBus 2-Wire Serial Interface
  • Programmable Under/Overtemperature Alarms
  • Supports SMBus Alert Response
  • Accuracy:
    • ±2°C (+60°C to +100°C, local)
    • ±3°C (-40°C to +125°C, local)
    • ±3°C (+60°C to +100°C, remote)
  • 3µA (typ) Standby Supply Current
  • 70µA (max) Supply Current in Auto-Convert Mode
  • +3V to +5.5V Supply Range
  • Small, 16-Pin QSOP Package

应用/用途

  • 局端电信设备
  • 计算机:台式机、工作站和服务器
  • 工业控制
  • LAN服务器
  • 多芯片模块
  • 智能电池组/充电器
  • 测试与测量设备

描述

The MAX1617 is a precise digital thermometer that reports the temperature of both a remote sensor and its own package. The remote sensor is a diode-connected transistor—typically a low-cost, easily mounted 2N3904 NPN type—that replaces conventional thermistors or thermocouples. Remote accuracy is ±3°C for multiple transistor manufacturers, with no calibration needed. The remote channel can also measure the die temperature of other ICs, such as microprocessors, that contain an on-chip, diode-connected transistor.

The 2-wire serial interface accepts standard System Management Bus (SMBus) Write Byte, Read Byte, Send Byte, and Receive Byte commands to program the alarm thresholds and to read temperature data. The data format is 7 bits plus sign, with each bit corresponding to 1°C, in two's complement format. Measurements can be done automatically and autonomously, with the conversion rate programmed by the user or programmed to operate in a single-shot mode. The adjustable rate allows the user to control the supply-current drain.

The MAX1617 is available in a small, 16-pin QSOP surface-mount package.

简化框图

MAX1617:典型工作电路 MAX1617:典型工作电路 Zoom icon

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心