回到顶部

2.5V to 16V Input, 18W Output High-Efficiency Buck-Boost Converter

Smallest Solution Size to Achieve 18W USB OTG Power

产品详情

主要特征

应用/用途

简化框图

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

主要特征

  • Wide Input Voltage Range: 2.5V to 16V
  • Default Output Voltage
    • 5V with Internal Feedback Resistors
    • 3V to 15V with External Feedback Resistors
  • Default 1.8MHz Switching Frequency
    • 1.5MHz and 1.2MHz Selectable through the I2C Interface
  • Forced-PWM (FPWM) Mode Operation Only
  • I2C-Programmable Output Voltage After Startup
    • 4.5V to 15V (Internal Feedback Resistors)
    • 3V to 15V (External Feedback Resistors, See Table 1)
  • 18W of Continuous Output Power (VIN ≥ 4V, VOUT ≥ 5V)
  • RSEL Configuration
    • I2C Interface Slave Address
    • Switching Current Limit Threshold
    • Internal/External Feedback Resistors
  • I2C Programming
    • Output Voltage (DVS)
    • Slew Rate of Output Voltage Change
    • Switching Current Limit Threshold
    • Switching Frequency
    • Power-OK (POK) Status and Fault Interrupt Masks
    • Internal Compensation
  • Soft-Start
  • Output Active Discharge
  • Open-Drain Power-OK (POK) Monitor/Fault Condition Interrupt (MAX77831B/C Only)
  • Protection Features
    • Undervoltage Lockout (UVLO)
    • Overcurrent Protection (OCP)
    • Overvoltage Protection (OVP)
    • Thermal Shutdown (THS)
  • High Density Interconnect (HDI) PCB Not Required (See the PCB Layout Guideline Section)
  • Available in 2.86mm x 2.06mm 35 WLP

应用/用途

  • Non-Battery Powered Applications up to 16V Input
  • Battery Powered Applications up to 16V Input with EN Control

描述

The MAX77831 is a high-efficiency, high-performance buck-boost converter targeted for systems requiring wide input voltage range (2.5V to 16V). It can supply 18W of continuous output power (for example, up to 2A at 9V (VIN ≥ 4V)).

The IC is available in 5V default output voltage when using internal feedback resistors. The IC can also be configured to any default output voltages between 3V and 15V when using external feedback resistors. The output voltage is adjustable dynamically through the I2C serial interface (see the Output Voltage Configuration section). The IC only operates in forced-PWM (FPWM) mode.

The SEL pin allows a single external resistor to program four different I2C interface slave addresses, four different switching-current limit thresholds, and selection between external/internal feedback resistors. The different switching-current limit thresholds allow the use of lower profile and smaller external components that are optimized for a particular application. The use of external feedback resistors allows for a wider output voltage range and customizable output voltages at startup.

An optional I2C serial interface allows dynamically controlling the output voltage, slew rate of the output voltage change, switching-current limit threshold, and switching frequency. The I2C-programmed settings have priority over the RSEL decoded settings.

The MAX77831 is available in a 2.86mm x 2.06mm 35-bump wafer level package (WLP).

简化框图

MAX77831: Functional Diagram MAX77831: Functional Diagram Zoom icon

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心