回到顶部
产品详情
主要特征
应用/用途
Parametric specs for Step-Down Switching Regulators
VIN (V) (min) | 4.5 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 3.3 |
VOUT1 (V) (max) | 3.6 |
IOUT1 (A) (max) | 10 |
Switch Type | External |
Preset VOUT (V) | 3.3 3.45 3.6 |
Output Adjust. Method | Preset Resistor |
Synchronous Switching? | Yes |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 350 |
Package/Pins | SSOP/20 |
Budgetary Price (See Notes) | 3.96 |
缩小
简化框图
Technical Docs
数据资料 | 5V至3.3V输出、同步整流、降压型电源控制器 | Jul 01, 2000 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Parametric specs for Step-Down Switching Regulators
VIN (V) (min) | 4.5 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 3.3 |
VOUT1 (V) (max) | 3.6 |
IOUT1 (A) (max) | 10 |
Switch Type | External |
Preset VOUT (V) | 3.3 3.45 3.6 |
Output Adjust. Method | Preset Resistor |
Synchronous Switching? | Yes |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 350 |
Package/Pins | SSOP/20 |
Budgetary Price (See Notes) | 3.96 |
主要特征
- >90% Efficiency
- 700µA Quiescent Supply Current
- 120µA Standby Supply Current
- 4.5V-to-5.5V Input Range
- Low-Cost Application Circuit
- All N-Channel Switches
- Small External Components
- Tiny Shrink-Small-Outline Package (SSOP)
- Predesigned Applications:
- Standard 5V to 3.3V DC-DC Converters up to 10A
- High-Accuracy Pentium P54C VR-Spec Supply
- Fixed Output Voltages Available:
- 3.3V (Standard)
- 3.45V (High-Speed Pentium)
- 3.6V (PowerPC)
- 3.3V (Standard)
应用/用途
- 本地5V至3.3V DC-DC转换
- 微处理器子板
- 高达10A或更高功率的电源
描述
The MAX767 is a high-efficiency, synchronous buck controller IC dedicated to converting a fixed 5V supply into a tightly regulated 3.3V output. Two key features set this device apart from similar, low-voltage step-down switching regulators: high operating frequency and all N-channel construction in the application circuit. The 300kHz operating frequency results in very small, low-cost external surface-mount components.
The inductor, at 3.3µH for 5A, is physically at least five times smaller than inductors found in competing solutions. All N-channel construction and synchronous rectification result in reduced cost and highest efficiency. Efficiency exceeds 90% over a wide range of loading, eliminating the need for heatsinking. Output capacitance requirements are low, reducing board space and cost.
The MAX767 is a monolithic BiCMOS IC available in 20-pin SSOP packages. For other fixed output voltages and package options, please consult the factory.
The inductor, at 3.3µH for 5A, is physically at least five times smaller than inductors found in competing solutions. All N-channel construction and synchronous rectification result in reduced cost and highest efficiency. Efficiency exceeds 90% over a wide range of loading, eliminating the need for heatsinking. Output capacitance requirements are low, reducing board space and cost.
The MAX767 is a monolithic BiCMOS IC available in 20-pin SSOP packages. For other fixed output voltages and package options, please consult the factory.
Technical Docs
数据资料 | 5V至3.3V输出、同步整流、降压型电源控制器 | Jul 01, 2000 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。