回到顶部

双输出(正-负)、DC-DC转换器,用于CCD及LCD

产品详情

主要特征

应用/用途

Parametric specs for Inverting Switching Regulators
VIN (V) (min) 2.7
VIN (V) (max) 5.5
VOUT1 (V) (min) 2.7
VOUT1 (V) (max) 24
IOUT1 (A) (max) 0.01
Switch Type Internal
Output Adjust. Method Resistor
# DC-DC Outputs 2
Alternate Topology Step-Up
Switching Frequency (kHz) 480
Package/Pins QSOP/16
TQFN/24
Parametric specs for Step-Up Switching Regulators
VIN (V) (min) 2.7
VIN (V) (max) 5.5
VOUT1 (V) (min) 2.7
VOUT1 (V) (max) 24
IOUT1 (A) (max) 0.01
Switch Type Internal
Output Adjust. Method Resistor
ICC (mA) (typ) 0.8
Shutdown Mode Supply Current (µA) (typ) 0.1
Shutdown Mode Supply Current (µA) (max) 1
# DC-DC Outputs 2
Switching Frequency (kHz) 480
Package/Pins QSOP/16
TQFN/24
Budgetary
Price (See Notes)
4.26
查看更多

简化框图

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Inverting Switching Regulators
VIN (V) (min) 2.7
VIN (V) (max) 5.5
VOUT1 (V) (min) 2.7
VOUT1 (V) (max) 24
IOUT1 (A) (max) 0.01
Switch Type Internal
Output Adjust. Method Resistor
# DC-DC Outputs 2
Alternate Topology Step-Up
Switching Frequency (kHz) 480
Package/Pins QSOP/16
TQFN/24
Parametric specs for Step-Up Switching Regulators
VIN (V) (min) 2.7
VIN (V) (max) 5.5
VOUT1 (V) (min) 2.7
VOUT1 (V) (max) 24
IOUT1 (A) (max) 0.01
Switch Type Internal
Output Adjust. Method Resistor
ICC (mA) (typ) 0.8
Shutdown Mode Supply Current (µA) (typ) 0.1
Shutdown Mode Supply Current (µA) (max) 1
# DC-DC Outputs 2
Switching Frequency (kHz) 480
Package/Pins QSOP/16
TQFN/24
Budgetary
Price (See Notes)
4.26

主要特征

  • Dual Output Using a Single Inductor
  • Low-Noise Output, 30mVp-p Ripple
  • Output Voltages up to 24V and down to -9V (up to 45V and down to -16V with added components)
  • Internal Switches in a Small 24-Pin 4mm x 4mm Thin QFN Package
  • 220kHz/400kHz Fixed-Frequency PWM Operation
  • Frequency Can Be Synchronized to External Clock
  • Power-OK Indicator
  • Selectable Power-On Sequencing
  • 0.1µA Logic-Controlled Shutdown

应用/用途

  • 便携式摄像机
  • CCD成像装置
  • 数码相机
  • LCD
  • 笔记本电脑

描述

The MAX685 DC-DC converter provides low-noise dual outputs for powering CCD imaging devices and LCDs. This device uses a single inductor to provide independently regulated positive and negative outputs. Integrated power switches are included in a small 24-Pin 4mm x 4mm Thin QFN package to save space and reduce cost. A 16-pin QSOP package is also available.

Each output delivers up to 10mA from a +2.7V to +5.5V input voltage range. Output voltages are set independently up to 24V and down to -9V. With a few additional low-cost components, the output voltages can be set at up to 45V and down to -16V. Output ripple magnitude is 30mVp-p. The MAX685 uses a fixed-frequency, pulse-width-modulated (PWM) control scheme at 220kHz or 400kHz to permit output noise filtering and to reduce the size of external components. The frequency can also be synchronized to an external clock signal between 200kHz and 480kHz.

The MAX685 has a power-OK indicator output (POK) that signals when both outputs are within regulation. A logic-controlled shutdown completely turns off both outputs and reduces supply current to 0.1µA. The user can also set which output turns on first.

The preassembled MAX685 evaluation kit is available to reduce design time.

简化框图

MAX685:典型工作电路 MAX685:典型工作电路 Zoom icon

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心