产品详情
Charging VIN (V) (max) | 5.5 |
Max. ICHG (A) | 2.5 |
Cell Chemistry | Supercapacitor |
Charger (V) | 0.8 to 5 |
Oper. Temp. (°C) | -40 to +125 |
Package/Pins | TDFN-CU/14 |
VIN (V) (min) | 0.8 |
VIN (V) (max) | 4.5 |
VOUT1 (V) (min) | 2.5 |
VOUT1 (V) (max) | 5 |
IOUT1 (A) (max) | 2.5 |
Switch Type | Internal |
Output Adjust. Method | Resistor |
IQ (mA) (typ) | 0.035 |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 2000 |
Design Tools | EE-Sim |
Package/Pins | TDFN-CU/14 |
Budgetary Price (See Notes) | 2.09 |
简化框图
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Charging VIN (V) (max) | 5.5 |
Max. ICHG (A) | 2.5 |
Cell Chemistry | Supercapacitor |
Charger (V) | 0.8 to 5 |
Oper. Temp. (°C) | -40 to +125 |
Package/Pins | TDFN-CU/14 |
VIN (V) (min) | 0.8 |
VIN (V) (max) | 4.5 |
VOUT1 (V) (min) | 2.5 |
VOUT1 (V) (max) | 5 |
IOUT1 (A) (max) | 2.5 |
Switch Type | Internal |
Output Adjust. Method | Resistor |
IQ (mA) (typ) | 0.035 |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 2000 |
Design Tools | generateDesignEESIMUrl('https://maxim.transim.com/pwm2/designreq/Index?partId=25686', '') |
Package/Pins | TDFN-CU/14 |
Budgetary Price (See Notes) | 2.09 |
主要特征
- 2.5V to 5V System Output Voltage
- Up to 4.5V Capacitor Voltage Range
- Up to 2.5A Peak Inductor Discharge Current
- Programmable Voltage and Current Thresholds
- ±2% Threshold Accuracy
- Up to 95% Efficiency, Charge or Discharge
- 2.5μA Ready Quiescent Current
- Small Solution Size
- 3mm x 3mm x 0.75mm TDFN Package
应用/用途
- 手持式工业设备
- 便携式计算机
- 具有可拆卸电池的便携式设备
描述
The MAX38886 is a storage capacitor or capacitor bank backup regulator designed to efficiently transfer power between a storage element and a system supply rail in reversible buck and boost operations using the same inductor.
When the main supply is present and above the minimum system supply voltage, the regulator operates in buck mode and charges the storage element at up to 500mA peak inductor current. Once the storage element is charged, the circuit draws only 2.5μA of current while it maintains the supercapacitor or other storage element in its ready state. When the main supply is removed, the regulator operates in boost mode and prevents the system from dropping below the minimum operating voltage, discharging the storage element at up to 2.5A peak inductor current.
The MAX38886 is externally programmable for minimum and maximum voltage of the storage element, such as supercapacitor, minimum system voltage, and maximum charge and discharge currents. The internal DC-DC converter requires only a 1µH inductor.
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。