回到顶部

Dual-Output, Configurable Multiphase Power-Supply Controller with PMBus Interface and Internal Buck Converter

Highly Versatile PMBus-Compatible, Dual-Output, Multiphase Power-Supply Controller Drives up to Six Power-Stage Devices

产品详情

主要特征

Parametric specs for Step-Down Switching Regulators
VIN (V) (min) 4.5
VIN (V) (max) 16
VOUT1 (V) (min) 0.25
VOUT1 (V) (max) 1.35
IOUT1 (A) (max) 300
Switch Type External
Output Adjust. Method Resistor, PMBus
Synchronous Switching? Yes
Power Good Signal Yes
# DC-DC Outputs 2
Switching Frequency (kHz) 800
Package/Pins TQFN/48
Budgetary
Price (See Notes)
4.45
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Step-Down Switching Regulators
VIN (V) (min) 4.5
VIN (V) (max) 16
VOUT1 (V) (min) 0.25
VOUT1 (V) (max) 1.35
IOUT1 (A) (max) 300
Switch Type External
Output Adjust. Method Resistor, PMBus
Synchronous Switching? Yes
Power Good Signal Yes
# DC-DC Outputs 2
Switching Frequency (kHz) 800
Package/Pins TQFN/48
Budgetary
Price (See Notes)
4.45

主要特征

  • Versatile and Flexible Controller
    • Generates Up to Six PWM Signals
    • Single- or Dual-Voltage Output with Flexible Phase Assignment
    • 0.5V to 2.0V Output-Voltage Range (MAX20754ETMA1+)
    • 0.25V to 2.0V Output-Voltage Range (MAX20754ETMA2+)
    • 4.5V to 16V Input-Voltage Range
    • 300kHz to 800kHz Switching Frequency Range
  • High-Power Density in a Small Overall Solution Size
    • Supports Coupled-Inductor Technology
    • Advanced Modulation Scheme Improves Transient Response
    • High-Loop Bandwidth Reduces Output-Capacitance Requirements
    • 48-Pin (7mm x 7mm) TQFN Package
    • Phase-Current Steering for Thermal Balancing
    • Efficient Integrated Internal Switching Regulator Powers Controller and Power Stages
  • Simple System Configuration
    • Four External Resistors Set Output Voltage, Bus Address, Switching Frequency, and Current Limit
  • Comprehensive PMBus Configuration, Control, and Telemetry
    • Compatible with PMBus Standard, Revision 1.3
    • 10kHz to 1MHz Bus Speed
    • PMBus Command Settings Stored in Nonvolatile Memory
    • Accurate Current, Voltage, and Temperature Reporting

应用/用途

  • ASICs, DSPs, and FPGAs
  • Communication, Networking, Servers, and Storage Equipment
  • DDR Memory
  • Microprocessor Chipsets

描述

The MAX20754 is a PMBus™-compatible, dualoutput, configurable multiphase power-supply controller for communication and networking applications. The controller is optimized for use with Maxim’s Dual Powertrain™ integrated power stages, which support a wide range of output current and voltage requirements. The controller generates six pulse-width modulated outputs, or “phases.” The number of phases per output channel is configurable to support high current requirements and one or two output voltages.

This highly versatile controller also includes an integrated switching regulator that supplies power for both the controller and the power-stage devices. The controller features accurate load-current reporting, power-stage temperature monitoring, fault detection, and extensive PMBus-command support. The controller allows the user to save desired PMBus parameters to nonvolatile memory.

The controller can be used with traditional discrete inductors, or with coupled-inductor topologies. Coupled inductors reduce the effective inductor value and size without increasing ripple current, reducing required output capacitance, and improving transient response.

The MAX20754 uses Maxim’s advanced modulation scheme (AMS) to provide improved transient response and reduce the required output capacitance compared to conventional pulse-width modulation (PWM) control. The AMS can be disabled if strict fixed-frequency PWM operation is desired.

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心