MAX20079

Automotive 36V 3.5A Buck Converter with 3.5μA IQ

Best-in-Class UltraLow IQ Buck Ideal for Automotive Applications


点击查看特定型号的库存状况。

说明

The MAX20079 is a small, automotive-grade synchronous buck converter with integrated high-side and low-side switches. The device is designed to deliver up to 3.5A with input voltages from +3V to +36V while using only 3.5µA quiescent current at no load. The MAX20079 provides an accurate output voltage of ±2% within the normal operation input range of +6V to +18V. With 65ns minimum on-time capability, the converter is capable of large input-to-output conversion ratios. Voltage quality can be monitored by observing the PGOOD signal. MAX20079 can operate in drop-out by running at 99% duty cycle, making it ideal for automotive and industrial applications. The IC offers standard parts with fixed output voltages of 3.3V and 5V. In addition, MAX20079 can be configured for output voltages from 3V to 12V, using an external resistor divider. Frequency is internally fixed at 2.1MHz, which allows for small external components, reduces output ripple, and guarantees there is no AM interference. A 400kHz option is also offered to provide minimum switching losses and maximum efficiency. MAX20079 automatically enters skip mode at light loads with ultra-low quiescent current of 3.5µA at no load. It offers pin-enabled spread-spectrum frequency modulation designed to minimize EMI-radiated emissions due to the modulation frequency.

The MAX20079 comes in a small 4mm x 4mm 20-pin SW-TQFN package and uses very few external components. The intelligent package layout results in an extremely low-noise solution with superior EMI performance.

MAX20079: Typical Application Circuit MAX20079: Typical Application Circuit 放大+

关键特性

  • Synchronous DC-DC Converter with Integrated FETs
    • 3.5A Output-Current Capability
    • 3.5μA Quiescent Current in Standby Mode
  • Small Solution Size Saves Space
    • 65ns Minimum On-Time
    • 2.1MHz or 400kHz Fixed Operating Frequency Options
    • Programmable 3V to 12V Output for the Buck, or Fixed 5V/3.3V Options Available
    • Fixed 3.5ms Internal Soft-Start
    • Innovative Current-Mode-Control Architecture Minimizes Total Board Space and BOM Count
  • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing
  • Protection Features and Operating Range Ideal for Automotive Applications
    • 3V to 36V Operating VIN Range
    • 40V Load-Dump Protection
    • 99% Duty-Cycle Operation with Low Dropout
    • -40°C to +125°C Automotive Temperature Range
    • AEC-Q100 Qualified

应用

  • 汽车
  • 高电压DC-DC转换器
  • 工业
Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
Preset VOUT
(V)
Output Adjust. MethodIOUT1
(A)
Switch TypeSynchronous SwitchingPower Good SignalDC-DC OutputsOper. Freq.
(kHz)
Design ToolsPackage/Pins
minmaxminmax
MAX20079 3.540110
3.3
5
Preset
Resistor
3.5InternalYesYes1
400
2100
EE-Sim
TDFN-CU/12
TQFN/20
查看所有Step-Down Switching Regulators (380)
Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。


MAX20079EVKIT: Evaluation Kit for the MAX20079

质量和环境数据

申请可靠性报告: MAX20079 
无铅封装的锡(Sn)晶须报告

工具和模型

  • EE-Sim: MAX20079 设计和仿真
  • CAD Symbols and Footprints

  • MAX20079AATP/VY+
  • MAX20079BATP/VY+
  • MAX20079DATP/VY+
  • MAX20079EATP/VY+
  • MAX20079FATP/VY+
  • 型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C  

    备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

    质量管理体系 >
    环境管理体系 >

     
    Status:
    Package:
    Temperature:

    相关资料


    MAXM17536
    4.5V to 60V, 4A High-Efficiency, DC-DC Step-Down SiP Power Module with Integrated Inductor

    • Reduces Design Complexity, Manufacturing Risks, and Time-to-Market
    • Saves Board Space in Space-Constrained Applications
    • Offers Flexibility for Power-Design Optimization

    MAX17576
    4.5V to 60V, 4A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20412
    Automotive Low-Voltage 2-Channel Step-Down Controller

    • 2-Channel, High-Efficiency DC-DC Controller in a Small Solution Size
    • High-Precision Regulator for Applications Processors
    • Low-Noise Features Reduce EMI

    MAX20343
    Ultra-Low Quiescent Current, Low Noise 3.5W Buck-Boost Regulator

    • Extend System Run Time
    • Low, Continuous Noise Profile
    • Adaptable Load Transient Response

    MAX20006E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20008E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20004E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX17630
    4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20011
    Automotive Single 8A/12A Step-Down Converter with High Efficiency

    • High-Efficiency DC-DC Converter
    • Up to 12A peak output current:
    • Differential Remote Voltage Sensing

    MAX15158Z
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability

    MAX20079
    Automotive 36V 3.5A Buck Converter with 3.5μA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX20026, MAX20026S
    Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

    • High-Integration Shrinks Solution Size
    • Performance Designed for Automotive Point-of-Load Regulation
    • Low-Noise Features Improve EMI Performance

    MAX20026S
    Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

    • High-Integration Shrinks Solution Size
    • Performance Designed for Automotive Point-of-Load Regulation
    • Low-Noise Features Improve EMI Performance

    MAX20801
    MPP Tracking DC-DC Converter

    • Performs MPPT on 20-24 Series Connected PV Cells
    • Fast MPPT Reacts Quickly to Changing Conditions
    • Integrated Voltage-Limiting Clamps Output Voltage

    MAX20800
    MPP Tracking DC-DC Converter

    • Performs MPPT on 20-24 Series Connected PV Cells
    • Fast MPPT Reacts Quickly to Changing Conditions
    • Integrated Voltage-Limiting Clamps Output Voltage

    MAX20059
    72V, 1A, Automotive Synchronous Step-Down DC-DC Converter

    • Synchronous DC-DC Converters with Integrated FETs
    • Flexibility
    • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

    MAX20058
    60V, 1A, Automotive Synchronous Step-Down DC-DC Converter

    • Synchronous DC-DC Converters with Integrated FETs
    • Flexibility
    • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

    MAXM15067
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15065
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM15066
    4.5V to 60V, 300mA Step-Down uSLIC Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17904
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17905
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17906
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAX20010C
    汽车应用、单通道、6A降压型转换器

    • 全集成、同步、6A DC-DC转换器,支持小方案尺寸
    • 高精度电压调节器,适用于应用处理器
    • 低噪声特性降低EMI

    MAX20010D
    汽车应用、单通道、6A降压型转换器

    • 全集成、同步、6A DC-DC转换器,支持小方案尺寸
    • 高精度电压调节器,适用于应用处理器
    • 低噪声特性降低EMI

    MAX20048
    汽车应用、40V、55µA IQ、2.2MHz、H桥、升/降压控制器

    • 满足严格的汽车级质量和可靠性要求
    • 高效、小尺寸方案
    • 低静态电流帮助设计师满足严格的OEM电流要求

    MAX20040
    汽车应用、2V至36V、2.2MHz、0.6A/1.2A升/降压转换器,集成H桥架构

    • 满足严格的汽车级质量和可靠性要求
    • 低静态电流帮助设计师满足严格的OEM电流要求(仅限B和D版本)
    • 高开关频率允许使用小尺寸外部元件

    MAX20039
    汽车应用、2V至36V、2.2MHz、0.6A/1.2A升/降压转换器,集成H桥架构

    • 满足严格的汽车级质量和可靠性要求
    • 低静态电流帮助设计师满足严格的OEM电流要求(仅限B和D版本)
    • 高开关频率允许使用小尺寸外部元件

    MAX20029B
    汽车应用、4/3/4通道、低压、降压型DC-DC转换器

    • 4通道降压型DC-DC转换器,带集成FET
    • 工作在3.0V至5.5V供电电压范围
    • 1.0V至4.0V固定或可调节输出电压

    MAX20029C
    汽车应用、4/3/4通道、低压、降压型DC-DC转换器

    • 4通道降压型DC-DC转换器,带集成FET
    • 工作在3.0V至5.5V供电电压范围
    • 1.0V至4.0V固定或可调节输出电压

    MAX20029, MAX20029B, MAX20029C
    汽车应用、4/3/4通道、低压、降压型DC-DC转换器

    • 4通道降压型DC-DC转换器,带集成FET
    • 工作在3.0V至5.5V供电电压范围
    • 1.0V至4.0V固定或可调节输出电压

    MAX77827
    5.5V输入、1.8A/3.1A开关升/降压转换器,6μA IQ

    • 1.8V至5.5V输入电压范围
    • 2.3V至5.3V单电阻可调节输出电压
    • 1.6A最大输出电流(3.1A ILIM选项,降压模式)