MAX20026S

Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

Four 1A Low-Voltage High-Efficient DC-DC Converters and One Low-Noise 200mA LDO


点击查看特定型号的库存状况。

说明

The MAX20026/MAX20026S power-management ICs (PMICs) integrate four low-voltage, high-efficiency, step-down DC-DC converters and one low-noise LDO linear regulator. Each of the four step-down DC-DC converter outputs is factory set and can deliver up to 1.0A of current. The LDO linear regulator output is selectable to 2.5V or adjustable, and can deliver 200mA of current. The PMICs operate from 3.0V to 5.5V, making them ideal for automotive point-of- load and post-regulation applications.

The PMICs feature fixed-frequency PWM-mode operation with a switching frequency of 3.2MHz. High-frequency operation allows for an all-ceramic capacitor design and small-size external components. The low-resistance on-chip switches ensure high efficiency at heavy loads while minimizing critical inductances, making the layout a much simpler task with respect to discrete solutions. Internal current sensing and loop compensation reduce board space and system cost.

Two of the four buck converters operate 180 degrees out of phase with the internal clock. This feature reduces the necessary input capacitance and improves EMI as well. All four buck converters operate in constant-PWM mode outside the AM band. The PMICs offer a SYNC input to synchronize to an external clock. The PMICs provide individual enable inputs and one power-good output.

The PMICs offer several important protection features, including input overvoltage protection, input undervoltage monitoring, input undervoltage lockout, cycle-by-cycle current limiting, and overtemperature shutdown. The input undervoltage monitor indicates a brownout condition by driving PGOOD low when the input falls below the undervoltage monitoring (UVM) threshold.

The MAX20026/MAX20026S PMICs are available in a 28-pin TQFN package with an exposed pad and are specified for operation over the -40°C to +125°C automotive temperature range.

关键特性

  • High-Integration Shrinks Solution Size
    • Quad Step-Down DC-DC Converters with Integrated MOSFETs, Capable of Delivering 1.0A Each
    • One 200mA LDO with Adjustable Output Voltage
    • Hybrid Load-Line Architecture Enables Small Output Capacitors
  • Performance Designed for Automotive Point-of-Load Regulation
    • Operates from 3.0V to 5.5V Supply Voltage
    • Individual Enable Signals for Each Output
    • UV/OV/UVM/PGOOD
    • Soft-Start and Supply Sequencing Reduces Inrush Current
  • Low-Noise Features Improve EMI Performance
    • 3.2MHz Switching Frequency
    • Forced-PWM Operation
    • Two Channels 180 Degrees Out-of-Phase
    • SYNC Input
  • Robust for the Automotive Environment
    • 28-Pin (4mm x 4mm x 0.8mm) TQFN-EP Package
    • -40°C to +125°C Operating Temperature Range
    • AEC-Q100 Qualified

应用

  • 汽车
  • 工业
Part NumberPrimary TopologyMonitor/Control FeaturesDC-DC/Power FeaturesVOUT
(V)
VOUT
(V)
Max. IOUT
(A)
Oper. Freq.
(kHz)
Package/Pins
minmax
MAX20026 Step-Down
External Synch.
Output OVP
Output UVP
Shutdown
Volt. or PWM Controlled Output
Current Limit
Fixed Freq./PWM
Internal Switch
Soft Start
Sync. Rectifier
1413200
See Data Sheet
查看所有Multifunction PMICs (83)

Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
Preset VOUT
(V)
Output Adjust. MethodIOUT1
(A)
Switch TypeSynchronous SwitchingPower Good SignalDC-DC OutputsOper. Freq.
(kHz)
Package/Pins
minmaxminmax
MAX20026 --14--1InternalYesYes4-
TQFN-CU/28
MAX20026S 35.50.83.8
1.35
3.3
Preset
Resistor
3200
TQFN-CU/28
查看所有Step-Down Switching Regulators (380)
Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。


MAX20026EVKIT: Evaluation Kit for the MAX20026/MAX20026S

质量和环境数据

申请可靠性报告: MAX20026S 
无铅封装的锡(Sn)晶须报告
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料


MAXM17536
4.5V to 60V, 4A High-Efficiency, DC-DC Step-Down SiP Power Module with Integrated Inductor

  • Reduces Design Complexity, Manufacturing Risks, and Time-to-Market
  • Saves Board Space in Space-Constrained Applications
  • Offers Flexibility for Power-Design Optimization

MAX17576
4.5V to 60V, 4A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20412
Automotive Low-Voltage 2-Channel Step-Down Controller

  • 2-Channel, High-Efficiency DC-DC Controller in a Small Solution Size
  • High-Precision Regulator for Applications Processors
  • Low-Noise Features Reduce EMI

MAX20343
Ultra-Low Quiescent Current, Low Noise 3.5W Buck-Boost Regulator

  • Extend System Run Time
  • Low, Continuous Noise Profile
  • Adaptable Load Transient Response

MAX20004E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

  • Multiple Functions for Small Size
  • High Precision
  • Robust for the Automotive Environment

MAX20006E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

  • Multiple Functions for Small Size
  • High Precision
  • Robust for the Automotive Environment

MAX20008E
36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

  • Multiple Functions for Small Size
  • High Precision
  • Robust for the Automotive Environment

MAX17630
4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20011
Automotive Single 8A/12A Step-Down Converter with High Efficiency

  • High-Efficiency DC-DC Converter
  • Up to 12A peak output current:
  • Differential Remote Voltage Sensing

MAX15158Z
High-Voltage Multiphase Boost Controller

  • Wide Operating Range
  • Integration Reduces Design Footprint
  • Robust Fault Protection Improves Quality and Reliability

MAX20079
Automotive 36V 3.5A Buck Converter with 3.5μA IQ

  • Synchronous DC-DC Converter with Integrated FETs
  • Small Solution Size Saves Space
  • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

MAX20026, MAX20026S
Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

  • High-Integration Shrinks Solution Size
  • Performance Designed for Automotive Point-of-Load Regulation
  • Low-Noise Features Improve EMI Performance

MAX20026S
Automotive Quad, Low-Voltage Step-Down DC-DC Converters with Low-Noise LDO

  • High-Integration Shrinks Solution Size
  • Performance Designed for Automotive Point-of-Load Regulation
  • Low-Noise Features Improve EMI Performance

MAX20801
MPP Tracking DC-DC Converter

  • Performs MPPT on 20-24 Series Connected PV Cells
  • Fast MPPT Reacts Quickly to Changing Conditions
  • Integrated Voltage-Limiting Clamps Output Voltage

MAX20800
MPP Tracking DC-DC Converter

  • Performs MPPT on 20-24 Series Connected PV Cells
  • Fast MPPT Reacts Quickly to Changing Conditions
  • Integrated Voltage-Limiting Clamps Output Voltage

MAX20059
72V, 1A, Automotive Synchronous Step-Down DC-DC Converter

  • Synchronous DC-DC Converters with Integrated FETs
  • Flexibility
  • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

MAX20058
60V, 1A, Automotive Synchronous Step-Down DC-DC Converter

  • Synchronous DC-DC Converters with Integrated FETs
  • Flexibility
  • Active-Low RESET Output and EN Input (26V max) Simplify Power Sequencing

MAXM15066
4.5V to 60V, 300mA Step-Down uSLIC Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM15067
4.5V to 60V, 300mA Step-Down uSLIC Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM15065
4.5V to 60V, 300mA Step-Down uSLIC Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM17904
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM17905
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAXM17906
4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

  • Easy to Use
  • High Efficiency
  • Flexible Design

MAX20010C
汽车应用、单通道、6A降压型转换器

  • 全集成、同步、6A DC-DC转换器,支持小方案尺寸
  • 高精度电压调节器,适用于应用处理器
  • 低噪声特性降低EMI

MAX20010D
汽车应用、单通道、6A降压型转换器

  • 全集成、同步、6A DC-DC转换器,支持小方案尺寸
  • 高精度电压调节器,适用于应用处理器
  • 低噪声特性降低EMI

MAX20048
汽车应用、40V、55µA IQ、2.2MHz、H桥、升/降压控制器

  • 满足严格的汽车级质量和可靠性要求
  • 高效、小尺寸方案
  • 低静态电流帮助设计师满足严格的OEM电流要求

MAX20039
汽车应用、2V至36V、2.2MHz、0.6A/1.2A升/降压转换器,集成H桥架构

  • 满足严格的汽车级质量和可靠性要求
  • 低静态电流帮助设计师满足严格的OEM电流要求(仅限B和D版本)
  • 高开关频率允许使用小尺寸外部元件

MAX20040
汽车应用、2V至36V、2.2MHz、0.6A/1.2A升/降压转换器,集成H桥架构

  • 满足严格的汽车级质量和可靠性要求
  • 低静态电流帮助设计师满足严格的OEM电流要求(仅限B和D版本)
  • 高开关频率允许使用小尺寸外部元件

MAX20029B
汽车应用、4/3/4通道、低压、降压型DC-DC转换器

  • 4通道降压型DC-DC转换器,带集成FET
  • 工作在3.0V至5.5V供电电压范围
  • 1.0V至4.0V固定或可调节输出电压

MAX20029, MAX20029B, MAX20029C
汽车应用、4/3/4通道、低压、降压型DC-DC转换器

  • 4通道降压型DC-DC转换器,带集成FET
  • 工作在3.0V至5.5V供电电压范围
  • 1.0V至4.0V固定或可调节输出电压

MAX20029C
汽车应用、4/3/4通道、低压、降压型DC-DC转换器

  • 4通道降压型DC-DC转换器,带集成FET
  • 工作在3.0V至5.5V供电电压范围
  • 1.0V至4.0V固定或可调节输出电压

MAX77827
5.5V输入、1.8A/3.1A开关升/降压转换器,6μA IQ

  • 1.8V至5.5V输入电压范围
  • 2.3V至5.3V单电阻可调节输出电压
  • 1.6A最大输出电流(3.1A ILIM选项,降压模式)