回到顶部

宽输入范围、可同步的、PWM SLIC电源

产品详情

主要特征

Parametric specs for Inverting Switching Regulators
VIN (V) (min) 3
VIN (V) (max) 28
VOUT1 (V) (min) 0
VOUT1 (V) (max) -185
IOUT1 (A) (max) 0.3
Switch Type External
Output Adjust. Method Resistor
# DC-DC Outputs 1
Switching Frequency (kHz) 500
Package/Pins UMAX/10
Budgetary
Price (See Notes)
2.43
缩小

简化框图

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Inverting Switching Regulators
VIN (V) (min) 3
VIN (V) (max) 28
VOUT1 (V) (min) 0
VOUT1 (V) (max) -185
IOUT1 (A) (max) 0.3
Switch Type External
Output Adjust. Method Resistor
# DC-DC Outputs 1
Switching Frequency (kHz) 500
Package/Pins UMAX/10
Budgetary
Price (See Notes)
2.43

主要特征

  • Low-Cost, Off-the-Shelf Transformer
  • 3V to 28V Input Range
  • Low Audio-Band Noise on Talk Battery
  • Effectively Handles Ring Trip Transients
  • Powers 2-, 4-, or 12-Line Equipment
  • High Efficiency Extends Battery Life During Life-Line Support Conditions
  • Adjustable 100kHz to 500kHz Switching Frequency
  • Clock Synchronization
  • Internal Soft-Start
  • Current-Mode PWM and Idle Mode™ Control Scheme
  • Logic-Level Shutdown
  • 10-Pin µMAX Package

应用/用途

  • 电缆与DSL调制解调器
  • CO DSL线驱动器电源
  • FTTH
  • 工业电源
  • LMDS/MMDS
  • MEMS偏置电源
  • 路由器/交换机
  • 机顶盒
  • VoIP振铃与摘机电压发生器
  • 无线本地环路(WLL)

描述

The MAX1856 offers a low-cost solution for generating a SLIC (ringer and off-hook) power supply. Using standard off-the-shelf transformers from multiple vendors, the MAX1856 generates various output voltages: -24V and -72V (dual output) for both ringer and off-hook supplies for voice-enabled broadband consumer premises equipment (CPE), -48V for IP phones and routers, -5V and -15V (single or dual output) for DSL CO line drivers, or negative voltages as high as -185V for MEMS bias supplies. The output voltages are adjusted with an external voltage divider.

Due to its wide operating voltage range, the MAX1856 operates from a low-cost, unregulated DC power supply for cost-sensitive applications like xDSL, cable modems, set-top boxes, LMDS, MMDS, WLL, and FTTH CPE. The MAX1856 provides low audio-band noise for talk battery and a sturdy output capable of handling the ring trip conditions for ring battery.

The operating frequency can be set between 100kHz and 500kHz with an external resistor in free-running mode. For noise-sensitive applications, the MAX1856's operating frequency can be synchronized to an external clock over its operating frequency range.

The flyback topology allows operation close to 50% duty cycle, offering high transformer utilization, low ripple current, and less stress on input and output capacitors. Internal soft-start minimizes startup stress on the input capacitor, without any external components.

The MAX1856's current-mode control scheme does not require external loop compensation. The low-side current-sense resistor provides accurate current-mode control and overcurrent protection.

简化框图

MAX1856:典型工作电路 MAX1856:典型工作电路 Zoom icon

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心