回到顶部
产品详情
Parametric specs for Step-Down/Up Switching Regulators
VIN (V) (min) | 0.7 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 2.2 |
VOUT1 (V) (max) | 5.5 |
IOUT1 (A) (max) | 0.8 |
Switch Type | Internal |
VOUT1 Tolerance (±%) | 1 |
Output Adjust. Method | Resistor |
Synchronous Switching? | Yes |
Power Good Signal | Yes |
IQ (mA) (max) | 0.11 |
# DC-DC Outputs | 1 |
Alternate Topology | Step-Up |
# LDO/ Op.Amp. Outputs | 1 |
Switching Frequency (kHz) | 400 |
Package/Pins | QSOP/16 |
Oper. Temp. (°C) | -40 to +85 |
Budgetary Price (See Notes) | 3.3 |
Parametric specs for Step-Up Switching Regulators
VIN (V) (min) | 0.7 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 2.2 |
VOUT1 (V) (max) | 5.5 |
IOUT1 (A) (max) | 0.8 |
Switch Type | Internal |
Output Adjust. Method | Resistor |
Power Good Signal | Yes |
Synchronous Switching? | Yes |
IQ (mA) (typ) | 0.055 |
Shutdown Mode Supply Current (µA) (typ) | 3 |
Shutdown Mode Supply Current (µA) (max) | 20 |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 400 |
Package/Pins | QSOP/16 |
Budgetary Price (See Notes) | 3.3 |
缩小
简化框图
Technical Docs
数据资料 | 1节至3节电池、大功率(1A)、低噪声、升压型DC-DC转换器 | Jan 01, 1999 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Parametric specs for Step-Down/Up Switching Regulators
VIN (V) (min) | 0.7 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 2.2 |
VOUT1 (V) (max) | 5.5 |
IOUT1 (A) (max) | 0.8 |
Switch Type | Internal |
VOUT1 Tolerance (±%) | 1 |
Output Adjust. Method | Resistor |
Synchronous Switching? | Yes |
Power Good Signal | Yes |
IQ (mA) (max) | 0.11 |
# DC-DC Outputs | 1 |
Alternate Topology | Step-Up |
# LDO/ Op.Amp. Outputs | 1 |
Switching Frequency (kHz) | 400 |
Package/Pins | QSOP/16 |
Oper. Temp. (°C) | -40 to +85 |
Budgetary Price (See Notes) | 3.3 |
Parametric specs for Step-Up Switching Regulators
VIN (V) (min) | 0.7 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 2.2 |
VOUT1 (V) (max) | 5.5 |
IOUT1 (A) (max) | 0.8 |
Switch Type | Internal |
Output Adjust. Method | Resistor |
Power Good Signal | Yes |
Synchronous Switching? | Yes |
IQ (mA) (typ) | 0.055 |
Shutdown Mode Supply Current (µA) (typ) | 3 |
Shutdown Mode Supply Current (µA) (max) | 20 |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 400 |
Package/Pins | QSOP/16 |
Budgetary Price (See Notes) | 3.3 |
主要特征
- Up to 96% Efficiency
- 1.1 VIN Guaranteed Start-Up
- 0.7V to 5.5V Input Range
- Up to 800mA Output
- Step-Up Output (adjustable from 2.5V to 5.5V)
- PWM/PFM Synchronous-Rectified Topology
- External Clock or Internal 300kHz Oscillator
- 3µA Logic-Controlled Shutdown
- Power-Good Output (MAX1701)
- Low-Battery Comparator (MAX1701)
- Uncommitted Gain Block (MAX1701)
应用/用途
- 数字无绳电话
- 手持式仪表(PDA、掌上电脑)
- 掌上电脑
- PCS电话
- 个人通信装置
- 双向寻呼
- 无线手机
描述
The MAX1700/MAX1701 are high-efficiency, low-noise, step-up DC-DC converters intended for use in battery-powered wireless applications. They use a synchronous-rectified pulse-width-modulation (PWM) boost topology to generate 2.5V to 5.5V outputs from battery inputs such as one to three NiCd/NiMH cells or one Li-Ion cell. Both devices have an internal 1A, 130mΩ N-channel MOSFET switch and a 250mΩ P-channel synchronous rectifier.
With their internal synchronous rectifier, the MAX1700/ MAX1701 deliver 5% better efficiency than similar nonsynchronous converters. They also feature a pulse-frequency-modulation (PFM) standby mode to improve efficiency at light loads, and a 3µA shutdown mode.
The MAX1700/MAX1701 come in 16-pin QSOP packages (which occupy the same space as an 8-pin SO). The MAX1701 includes two comparators to generate power-good and low-battery warning outputs. It also contains a gain block that can be used to build a linear regulator using an external P-channel pass device.
For higher-power outputs, refer to the MAX1703. For dual outputs (step-up and linear regulator), refer to the MAX1705/MAX1706. For an on-board analog-to-digital converter, refer to the MAX848/MAX849.
The MAX1701 evaluation kit is available to speed design time.
With their internal synchronous rectifier, the MAX1700/ MAX1701 deliver 5% better efficiency than similar nonsynchronous converters. They also feature a pulse-frequency-modulation (PFM) standby mode to improve efficiency at light loads, and a 3µA shutdown mode.
The MAX1700/MAX1701 come in 16-pin QSOP packages (which occupy the same space as an 8-pin SO). The MAX1701 includes two comparators to generate power-good and low-battery warning outputs. It also contains a gain block that can be used to build a linear regulator using an external P-channel pass device.
For higher-power outputs, refer to the MAX1703. For dual outputs (step-up and linear regulator), refer to the MAX1705/MAX1706. For an on-board analog-to-digital converter, refer to the MAX848/MAX849.
The MAX1701 evaluation kit is available to speed design time.
Technical Docs
数据资料 | 1节至3节电池、大功率(1A)、低噪声、升压型DC-DC转换器 | Jan 01, 1999 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。