MAX16939

36V, 3.5A, 2.2MHz Step-Down Converters with 28µA Quiescent Current

3.5A, 36V, 2MHz Automotive Buck Converter with Low IQ and EMI Management


点击查看特定型号的库存状况。

说明

The MAX16935/MAX16939 are 3.5A current-mode step-down converters with integrated high-side and low-side MOSFETs designed to operate with an external Schottky diode for better efficiency. The low-side MOSFET enables fixed-frequency forced-PWM (FPWM) operation under light-load applications. The devices operate with input voltages from 3.5V to 36V, while using only 28µA quiescent current at no load. The switching frequency is resistor programmable from 220kHz to 2.2MHz and can be synchronized to an external clock. The devices’ output voltage is available as 3.3V/5V fixed or adjustable from 1V to 10V. The wide input voltage range along with its ability to operate at 98% duty cycle during undervoltage transients make the devices ideal for automotive and industrial applications.

Under light-load applications, the FSYNC logic input allows the devices to either operate in skip mode for reduced current consumption or fixed-frequency FPWM mode to eliminate frequency variation to minimize EMI. Fixed-frequency FPWM mode is extremely useful for power supplies designed for RF transceivers where tight emission control is necessary. Protection features include cycle-by-cycle current limit and thermal shutdown with automatic recovery. Additional features include a power-good monitor to ease power-supply sequencing and a 180° out-of-phase clock output relative to the internal oscillator at SYNCOUT to create cascaded power supplies with multiple devices.

The MAX16935/MAX16939 operate over the -40°C to +125°C automotive temperature range and are available in 16-pin (5mm × 5mm) TQFN-EP and 16-pin TSSOP-EP packages.
MAX16935: Typical Application Circuit MAX16935: Typical Application Circuit 放大+

关键特性

  • Integration and High-Switching Frequency Saves Space
    • Integrated 3.5A High-Side Switch
    • Low-BOM-Count Current-Mode Control Architecture
    • Fixed Output Voltage with ±2% Accuracy or Externally Resistor Adjustable (1V to 10V)
    • 220kHz to 2.2MHz Switching Frequency with Three Operation Modes (Skip Mode, Forced Fixed-Frequency Operation, and External Frequency Synchronization)
    • Automatic LX Slew-Rate Adjustment for Optimum Efficiency Across Operating Frequency Range
  • 180° Out-of-Phase Clock Output at SYNCOUT Enables Cascaded Power Supplies for Increased Power Output
  • Spread-Spectrum Frequency Modulation Reduces EMI Emissions
  • Wide Input Voltage Range Supports Automotive Applications
    • 3.5V to 36V Input Voltage Range
    • Enable Input Compatible from 3.3V Logic Level to 42V
  • Robust Performance Supports Wide Range of Automotive Applications
    • -40°C to +125°C Automotive Temperature Range
    • Thermal-Shutdown Protection
    • AEC-Q100 Qualified
  • Power-Good Output Allows Power-Supply Sequencing
  • Tight Overvoltage Protection Provides Smaller Overshoot Voltages (MAX16939)

应用

  • DC动力系统分配
  • 导航及无线电头单元
  • 负载点应用
Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
Preset VOUT
(V)
Output Adjust. MethodIOUT1
(A)
Switch TypePower Good SignalDC-DC OutputsOper. Freq.
(kHz)
Design ToolsPackage/PinsBudgetary
Price
minmaxminmaxSee Notes
MAX16935 3.542110
3.3
5
Preset
Resistor
3.5InternalYes1
200
2200
EE-Sim
TQFN/16
TSSOP/16
$1.67 @1k
MAX16939 
TQFN/16
查看所有Step-Down Switching Regulators (389)
Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。


MAX16935EVKIT: Evaluation Kit for the MAX16935

质量和环境数据

申请可靠性报告: MAX16939 
无铅封装的锡(Sn)晶须报告

工具和模型

  • EE-Sim: MAX16939 设计和仿真
  • MAX16939 SIMPLIS Schematic
  • 型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C  

    备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

    质量管理体系 >
    环境管理体系 >

     
    Status:
    Package:
    Temperature:

    相关资料


    MAX20473
    Low-Voltage Synchronous Boost Converter

    • Synchronous Boost Converter
    • 3.0V to 4.0V Operating Supply Voltage
    • True Output Shutdown
  • High Precision
    • ±1.5% Output-Voltage Accuracy
    • 93V ±2% Undervoltage Monitoring
    • 107V ±2% Overvoltage Monitoring
  • Robust for the Automotive Environment
    • Current-Mode Control, Forced-PWM, and Skip Operation
    • Overtemperature and Overcurrent Protection
    • 12-Pin (3mm × 3mm) TDFN

  • MAX17662
    3.5V to 36V, 2A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX77504
    14V Input, 3A High-Efficiency Buck Converter in WLP or QFN

    • 3A Single-Channel Buck Regulator
    • 2.6V to 14V Input Voltage
    • 0.6V to 6V Output Voltage Range

    MAX20458
    36V Boost Controller with 3.5A Synchronous Buck Converter For Automotive Applications

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

    MAX20057
    36V Boost Controller with Dual 3.5A/2A Synchronous Buck Converters for Automotive Applications

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • Integration and Thermally Enhanced Packages Save Board Space and Cost

    MAX17631
    4.5V to 36V, 1.5A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX17634A
    4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX17634B
    4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX17634C
    4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX77501
    110VPK-PK High-Efficiency Piezo Haptic Actuator Boost Driver

    • 110VPK-PK Haptic Waveforms Generation
    • Optimized for up to 2µF Haptic Piezo Actuator
    • 2.8V to 5.5V Input Supply Range

    MAX20457
    36V Dual 3.5A/2A Synchronous Buck Converters for Automotive Applications

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input-Voltage Range

    MAXM17536
    4.5V to 60V, 4A High-Efficiency, DC-DC Step-Down SiP Power Module with Integrated Inductor

    • Reduces Design Complexity, Manufacturing Risks, and Time-to-Market
    • Saves Board Space in Space-Constrained Applications
    • Offers Flexibility for Power-Design Optimization

    MAX17576
    4.5V to 60V, 4A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20412
    Automotive Low-Voltage 2-Channel Step-Down Controller

    • 2-Channel, High-Efficiency DC-DC Controller in a Small Solution Size
    • High-Precision Regulator for Applications Processors
    • Low-Noise Features Reduce EMI

    MAX20343
    Ultra-Low Quiescent Current, Low Noise 3.5W Buck-Boost Regulator

    • Extend System Run Time
    • Low, Continuous Noise Profile
    • Adaptable Load Transient Response

    MAX20004E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20006E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20008E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX17630
    4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20011
    Automotive Single 8A/12A Step-Down Converter with High Efficiency

    • High-Efficiency DC-DC Converter
    • Up to 12A peak output current:
    • Differential Remote Voltage Sensing

    MAX15158Z
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability

    MAX20079
    Automotive 36V 3.5A Buck Converter with 3.5μA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX20026, MAX20026S
    汽车应用、四通道、低压、降压型DC-DC转换,带低噪声LDO

    • 高度集成减小方案尺寸
    • 设计性能支持汽车应用负载点调节
    • 低噪声特性改善EMI性能

    MAX20026S
    汽车应用、四通道、低压、降压型DC-DC转换,带低噪声LDO

    • 高度集成减小方案尺寸
    • 设计性能支持汽车应用负载点调节
    • 低噪声特性改善EMI性能

    MAX20801
    MPP跟踪DC-DC转换器

    • 对20-24个串联PV电池执行MPPT
    • 快速MPPT快速响应条件变化
    • 集成限压箝位输出电压

    MAX20800
    MPP跟踪DC-DC转换器

    • 对20-24个串联PV电池执行MPPT
    • 快速MPPT快速响应条件变化
    • 集成限压箝位输出电压

    MAX20059
    4.5V至76V、1A高效、同步降压型DC-DC转换器

    • 同步DC-DC转换器,集成FET
    • 设计灵活性
    • 低电平有效RESET输出和EN输入(最大26V)简化电源排序

    MAX20058
    60V、1A、汽车应用、同步降压型DC-DC转换器

    • 同步DC-DC转换器,集成FET
    • 设计灵活性
    • 低电平有效RESET输出和EN输入(最大26V)简化上电时序