回到顶部
产品详情
主要特征
应用/用途
Parametric specs for Step-Down Switching Regulators
VIN (V) (min) | 2.7 |
VIN (V) (max) | 14 |
VOUT1 (V) (min) | 1.25 |
VOUT1 (V) (max) | 14 |
IOUT1 (A) (max) | 1 |
Switch Type | Internal |
Preset VOUT (V) | 3.3 |
Output Adjust. Method | Preset Resistor |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 600 |
Package/Pins | QSOP/16 |
Budgetary Price (See Notes) | 4.18 |
缩小
简化框图
Technical Docs
数据资料 | 低噪声、14V输入、1A、PWM降压型转换器 | May 29, 2002 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Parametric specs for Step-Down Switching Regulators
VIN (V) (min) | 2.7 |
VIN (V) (max) | 14 |
VOUT1 (V) (min) | 1.25 |
VOUT1 (V) (max) | 14 |
IOUT1 (A) (max) | 1 |
Switch Type | Internal |
Preset VOUT (V) | 3.3 |
Output Adjust. Method | Preset Resistor |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 600 |
Package/Pins | QSOP/16 |
Budgetary Price (See Notes) | 4.18 |
主要特征
- Up to 96% Efficiency
- 1A Guaranteed Output Current
- 100% Duty Cycle in Dropout
- 2.7V to 14V Input Range (15V Absolute Max)
- ±1% Accurate Reference Output
- 0.24Ω P-Channel On-Resistance
- Synchronizable Switching Frequency
- Fixed-Frequency PWM Operation
- 300kHz (MAX1684)
- 600kHz (MAX1685)
- 150µA Normal-Mode Quiescent Current
- 25µA Low-Power Mode Quiescent Current
- 2µA Shutdown Current
- Dual Mode Fixed 3.3V (±1%) Output or Adjustable Output (1.25V to VIN)
- Small 16-QSOP Package
- Auxiliary Output (CVL): 3V/5mA
应用/用途
- 蜂窝电话
- 计算机外设
- PDA与手持终端
- 个人通信装置
- 双向无线装置和对讲机
描述
The MAX1684/MAX1685 are high-efficiency, internal-switch, pulse-width modulation (PWM) step-down switching regulators intended to power cellular phones, communicating PDAs, and handy-terminals. These devices deliver a guaranteed 1A output current from two lithium-ion (Li+) batteries. Their wide-input voltage range of 2.7V to 14V gives design flexibility and allows batteries to charge from a wall cube, since the ICs operate at the higher voltages that occur when the battery is removed. The output voltage is preset to 3.3V or can be externally adjusted from 1.25V to VIN.
The low on-resistance power switch and built-in synchronous rectifier provide high efficiencies of up to 96%. There are four modes of operation: fixed-frequency, normal, low-power, and shutdown. The fixed-frequency PWM mode of operation offers excellent noise characteristics. The normal mode maintains high efficiency at all loads. The low-power mode is used to conserve power in standby or when full load is not required. The shutdown mode is used to power down the device for minimal current draw.
The MAX1684 runs at 300kHz for applications that require highest efficiency. The MAX1685 runs at 600kHz to allow the use of smaller external components. These devices can also be synchronized to an external clock. Other features include a 100% duty cycle for low-dropout applications, an auxiliary 3V/5mA output, and a 1% accurate reference.
Both devices are available in a space-saving 16-QSOP package. An evaluation kit is also available to help speed designs. For a similar device in a 10-pin µMAX® package with lower input voltage requirements (5.5V max), refer to the MAX1692 data sheet.
The low on-resistance power switch and built-in synchronous rectifier provide high efficiencies of up to 96%. There are four modes of operation: fixed-frequency, normal, low-power, and shutdown. The fixed-frequency PWM mode of operation offers excellent noise characteristics. The normal mode maintains high efficiency at all loads. The low-power mode is used to conserve power in standby or when full load is not required. The shutdown mode is used to power down the device for minimal current draw.
The MAX1684 runs at 300kHz for applications that require highest efficiency. The MAX1685 runs at 600kHz to allow the use of smaller external components. These devices can also be synchronized to an external clock. Other features include a 100% duty cycle for low-dropout applications, an auxiliary 3V/5mA output, and a 1% accurate reference.
Both devices are available in a space-saving 16-QSOP package. An evaluation kit is also available to help speed designs. For a similar device in a 10-pin µMAX® package with lower input voltage requirements (5.5V max), refer to the MAX1692 data sheet.
Technical Docs
数据资料 | 低噪声、14V输入、1A、PWM降压型转换器 | May 29, 2002 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。