回到顶部
MyMaxim 订阅产品详情
主要特征
应用/用途
简化框图
Technical Docs
| 数据资料 | MAX1676评估板 | Mar 01, 2000 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
主要特征
- Synchronous Rectification for Improved Efficiency
- Operates Down to 0.7V Input Supply Voltage
- No External Schottky Diode Required (for multicell applications)
- Selectable Current Limit (0.5A or 1.0A)
- Damping Circuit Reduces EMI
- 16µA Quiescent Current
- 0.1µA Typical Shutdown Current
- Low-Battery Detector (LBI/LBO)
- 10-Pin µMAX® Package
- Surface-Mount Construction
- Fully Assembled and Tested
应用/用途
- 1节至3节电池供电的手持设备
- 手持式计算机
- 医疗设备
- 寻呼机
- PDA
- 射频标记
- 无线电话
描述
The MAX1676 is a high-efficiency, step-up DC-DC converter for portable hand-held devices. It accepts a positive input voltage between 0.7V to 5.5V and converts it to a higher output voltage. The MAX1676 includes a damping circuit (at BATT) that suppresses inductor ringing to reduce electromagnetic interference (EMI).
The MAX1676 evaluation kit (EV kit) is a fully assembled and tested surface-mount printed circuit board. Three jumpers on the EV kit allow for easy access to the output voltage select, current limit, and shutdown features.
The output voltage is both adjustable and pin-selectable. A movable jumper selects either a 3.3V or 5.0V output, or it can be left open and a resistor network can be used to obtain a voltage in the 2V to 5.5V range. The inductor current limit is selectable for either 0.5A or 1.0A. In shutdown mode, the MAX1676 typically draws only 0.1µA.
The MAX1676 evaluation kit (EV kit) is a fully assembled and tested surface-mount printed circuit board. Three jumpers on the EV kit allow for easy access to the output voltage select, current limit, and shutdown features.
The output voltage is both adjustable and pin-selectable. A movable jumper selects either a 3.3V or 5.0V output, or it can be left open and a resistor network can be used to obtain a voltage in the 2V to 5.5V range. The inductor current limit is selectable for either 0.5A or 1.0A. In shutdown mode, the MAX1676 typically draws only 0.1µA.
简化框图
Technical Docs
| 数据资料 | MAX1676评估板 | Mar 01, 2000 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
询价申请