回到顶部

VR13.HC and AI Cores Dual-Output Voltage Regulator Chipset

An Ultra-High Efficiency Solution, Ideal for the High-Density Power Needs of Intel VR13.HC Server CPUs

产品详情

主要特征

应用/用途

Parametric specs for Step-Down Switching Regulators
VIN (V) (min) 4.5
VIN (V) (max) 16
VOUT1 (V) (min) 0.25
Preset VOUT (V) 0.8
Output Adjust. Method Digital/VID
Synchronous Switching? Yes
Power Good Signal Yes
# DC-DC Outputs 2
Switching Frequency (kHz) 400
Package/Pins QFN/56
Budgetary
Price (See Notes)
3.58
查看更多

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Step-Down Switching Regulators
VIN (V) (min) 4.5
VIN (V) (max) 16
VOUT1 (V) (min) 0.25
Preset VOUT (V) 0.8
Output Adjust. Method Digital/VID
Synchronous Switching? Yes
Power Good Signal Yes
# DC-DC Outputs 2
Switching Frequency (kHz) 400
Package/Pins QFN/56
Budgetary
Price (See Notes)
3.58

主要特征

  • High Power Density and Efficiency
    • Smart Power-Stage Support: MAX20778/A, MAX20779/A/B/C, MAX20780, MAX20790, MAX16604
    • Top-Tier Efficiency (95.6% Peak Efficiency at 1.8VOUT)
    • Integrated Input Power Monitor
  • Telemetry Through PMBus
    • Digitally Programmable Configuration
    • Input Voltage, Current, and Power Monitoring
    • Power-Stage Temperature Monitoring and Reporting
  • Advanced Power Management
    • Autonomous Phase-Shedding
    • Orthogonal Current Rebalance for Phase-Current Balance During Transients
    • Low-Quiescent Current—Improves Light-Load and Standby Efficiency
  • Protection Features
    • Input and Bias Supply Undervoltage Protection
    • Overcurrent Protection
    • Critical Fault-Flag Output Pin

应用/用途

  • High-Current Multiphase Voltage Regulators
  • - AI Cores and XPUs
  • - VR13.HC CPUs and Memory
  • - Graphics Processors
  • - Networking ASICs
  • Servers and Workstations
  • Enterprise Storage
  • Communications and Networking Equipment Supply

描述

The MAX16602 IC provides a high-density, flexible and scalable solution to power AI cores or Intel® VR13.HC server CPUs. This Maxim controller IC employs coupled inductors and smart power-stage ICs to implement high-efficiency core regulators with enhanced transient response and low quiescent current. An additional single-phase output generates the VSA rail in the system using a single-phase smart power stage. The complete circuit is a highly efficient (8+1) multiphase synchronous buck converter with extensive status and parameter-measurement features. The controller also supports PWM paralleling to control up to 16 phases. A single, scalable PCB design with appropriate smart power stage IC selection can be used to produce regulators with a wide range of current ratings.

The IC’s architecture simplifies design, reduces component count, enables advanced power management and telemetry, and increases energy savings over the full load range. Autonomous phase-shedding is implemented to maintain high efficiency across the entire load range.

Regulator parameters for protection and shutdown can be set and monitored through the serial interface using the PMBus™ protocol. Power-stage faults, input and output voltage, input and output current, input power, and the temperature of each smart power-stage IC are readable over the serial interface. The critical fault retention feature prevents exothermic events after a power-device fault. The smart power-stage ICs communicate with the controller IC through analog and digital signals that are also readable through the registers in the controller IC. Preset and user configurations are programmed in nonvolatile memory (NVM). MTP-programmable NVM circuits allow for seven field modifications.

An integrated 3.3V to 1.8V regulator supports both MAX16602 and power-stage ICs with 1.8V bias supplies. SNS_PS_BIAS monitoring also allows for flexible bias and sequencing.

The MAX16602 is available in a 56-pin, 7mm x 7mm QFN package.

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心