回到顶部
MyMaxim 订阅产品详情
主要特征
应用/用途
Parametric specs for Step-Down Switching Regulators
| VIN (V) (min) | 3 |
| VIN (V) (max) | 16 |
| VOUT1 (V) (min) | 1.5 |
| VOUT1 (V) (max) | 3.3 |
| IOUT1 (A) (max) | 2.5 |
| Switch Type | External |
| Preset VOUT (V) | 5 |
| Output Adjust. Method | Preset Resistor |
| # DC-DC Outputs | 1 |
| Switching Frequency (kHz) | 300 |
| Package/Pins | SOIC (N)/8 |
| Budgetary Price (See Notes) | 2.37 |
缩小
简化框图
Technical Docs
| 数据资料 | 5V/3.3V或可调、高效率、低压差、降压型DC-DC控制器 | Jan 28, 2010 | |
| 应用笔记 | 利用超低电流、脉冲频率调制(PFM) DC-DC转换器降低待机功耗 | ||
| 设计指南 | Energy Management for Small Portable Systems |
参量
Parametric specs for Step-Down Switching Regulators
| VIN (V) (min) | 3 |
| VIN (V) (max) | 16 |
| VOUT1 (V) (min) | 1.5 |
| VOUT1 (V) (max) | 3.3 |
| IOUT1 (A) (max) | 2.5 |
| Switch Type | External |
| Preset VOUT (V) | 5 |
| Output Adjust. Method | Preset Resistor |
| # DC-DC Outputs | 1 |
| Switching Frequency (kHz) | 300 |
| Package/Pins | SOIC (N)/8 |
| Budgetary Price (See Notes) | 2.37 |
主要特征
- More than 90% Efficiency (10mA to 1.5A Loads)
- More than 12.5W Output Power
- Less than 0.3V Dropout Voltage at 500mA
- 100µA Max Quiescent Supply Current
- 5µA Max Shutdown Supply Current
- 16V Max Input Voltage
- 5V (MAX1649), 3.3V (MAX1651), or Adjustable Output Voltage
- Current-Limited Control Scheme
- Up to 300kHz Switching Frequency
- Up to 96.5% Duty Cycle
应用/用途
- 5V至3.3V绿色PC应用
- 电池供电应用
- 高效降压转换器
- PDA
描述
The MAX1649/MAX1651 BiCMOS, step-down, DC-DC switching controllers provide high efficiency over loads ranging from 1mA to more than 2.5A. A unique, current-limited pulse-frequency-modulated (PFM) control scheme gives these devices the benefits of pulse-width-modulation (PWM) converters (high efficiency at heavy loads), while using only 100µA of supply current (vs. 2mA to 10mA for PWM converters). Dropout performance down to 300mV is provided by a high switch duty cycle (96.5%) and a low current-sense threshold (110mV).
A high switching frequency (up to 300kHz) allows these devices to use miniature external components.
The MAX1649/MAX1651 have dropout voltages less than 0.3V at 500mA and accept input voltages up to 16V. Output voltages are preset at 5V (MAX1649), or 3.3V (MAX1651). They can also be adjusted to any voltage from 1.5V to the input voltage by using two resistors.
These step-down controllers drive external P-channel MOSFETs at loads greater than 12.5W. If less power is required, use the MAX639/MAX640/MAX653 step-down converters with on-chip FETs, which allow up to a 225mA load current.
A high switching frequency (up to 300kHz) allows these devices to use miniature external components.
The MAX1649/MAX1651 have dropout voltages less than 0.3V at 500mA and accept input voltages up to 16V. Output voltages are preset at 5V (MAX1649), or 3.3V (MAX1651). They can also be adjusted to any voltage from 1.5V to the input voltage by using two resistors.
These step-down controllers drive external P-channel MOSFETs at loads greater than 12.5W. If less power is required, use the MAX639/MAX640/MAX653 step-down converters with on-chip FETs, which allow up to a 225mA load current.
Technical Docs
| 数据资料 | 5V/3.3V或可调、高效率、低压差、降压型DC-DC控制器 | Jan 28, 2010 | |
| 应用笔记 | 利用超低电流、脉冲频率调制(PFM) DC-DC转换器降低待机功耗 | ||
| 设计指南 | Energy Management for Small Portable Systems |
询价申请