MAX1631

多输出、低噪声电源控制器,用于笔记本电脑

高度集成的笔记本电源控制器具有最高的系统性能和最小尺寸


点击查看特定型号的库存状况。

说明

The MAX1630–MAX1635 are buck-topology, step-down, switch-mode, power-supply controllers that generate logic-supply voltages in battery-powered systems. These high-performance, dual/triple-output devices include on-board power-up sequencing, power-good signaling with delay, digital soft-start, secondary winding control, low-dropout circuitry, internal frequency-compensation networks, and automatic bootstrapping.

Up to 96% efficiency is achieved through synchronous rectification and Maxim's proprietary Idle Mode™ control scheme. Efficiency is greater than 80% over a 1000:1 load-current range, which extends battery life in system-suspend or standby mode. Excellent dynamic response corrects output load transients caused by the latest dynamic-clock CPUs within five 300kHz clock cycles. Strong 1A on-board gate drivers ensure fast external N-channel MOSFET switching.
These devices feature a logic-controlled and synchronizable, fixed-frequency, pulse-width-modulation (PWM) operating mode. This reduces noise and RF interference in sensitive mobile communications and pen-entry applications. Asserting the active-low SKIP pin enables fixed-frequency mode, for lowest noise under all load conditions.
The MAX1630–MAX1635 include two PWM regulators, adjustable from 2.5V to 5.5V with fixed 5.0V and 3.3V modes. All these devices include secondary feedback regulation, and the MAX1630/MAX1632/MAX1633/ MAX1635 each contain 12V/120mA linear regulators. The MAX1631/MAX1634 include a secondary feedback input (SECFB), plus a control pin (STEER) that selects which PWM (3.3V or 5V) receives the secondary feedback signal. SECFB provides a method for adjusting the secondary winding voltage regulation point with an external resistor divider, and is intended to aid in creating auxiliary voltages other than fixed 12V.

The MAX1630/MAX1631/MAX1632 contain internal output overvoltage and undervoltage protection features.

关键特性

  • 96% Efficiency
  • +4.2V to +30V Input Range
  • 2.5V to 5.5V Dual Adjustable Outputs
  • Selectable 3.3V and 5V Fixed or Adjustable Outputs (Dual Mode™)
  • 12V Linear Regulator
  • Adjustable Secondary Feedback (MAX1631/MAX1634)
  • 5V/50mA Linear Regulator Output
  • Precision 2.5V Reference Output
  • Programmable Power-Up Sequencing
  • Power-Good (active-low RESET) Output
  • Output Overvoltage Protection (MAX1630/MAX1631/MAX1632)
  • Output Undervoltage Shutdown (MAX1630/MAX1631/MAX1632)
  • 200kHz/300kHz Low-Noise, Fixed-Frequency Operation
  • Low-Dropout, 99% Duty-Factor Operation
  • 2.5mW Typical Quiescent Power (+12V input, both SMPSs on)
  • 4µA Typical Shutdown Current
  • 28-Pin SSOP Package

应用

  • 台式CPU本地DC-DC转换器
  • 笔记本电脑和亚笔记本电脑
  • PDA与移动通信
Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
Preset VOUT
(V)
Output Adjust. MethodIOUT1
(A)
Switch TypeSynchronous SwitchingDC-DC OutputsOper. Freq.
(kHz)
Package/Pins
minmaxminmax
MAX1631 4.2302.55
3.3
5
Preset
Resistor
4ExternalYes2
200
300
SSOP/28
查看所有Step-Down Switching Regulators (380)
Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。


MAX1630EVKIT: MAX1630、MAX1631、MAX1632评估板
MAX1631EVKIT: MAX1630、MAX1631、MAX1632评估板
MAX1632EVKIT: MAX1630、MAX1631、MAX1632评估板

质量和环境数据

申请可靠性报告: MAX1631 
无铅封装的锡(Sn)晶须报告

CAD Symbols and Footprints

  • MAX1631CAI+
  • MAX1631EAI+
  • MAX1631EAI+T
  • 型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C  

    备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

    质量管理体系 >
    环境管理体系 >

     
    Status:
    Package:
    Temperature:

    相关资料


    MAX17634A
    4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX17634B
    4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX17634C
    4.5V to 36V, 4.25A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX77501
    110VPK-PK High-Efficiency Piezo Haptic Actuator Boost Driver

    • 110VPK-PK Haptic Waveforms Generation
    • Optimized for up to 2µF Haptic Piezo Actuator
    • 2.8V to 5.5V Input Supply Range

    MAX20457
    36V Dual 3.5A/2A Synchronous Buck Converters for Automotive Applications

    • Meets Stringent OEM Module Power Consumption and Performance Specifications
    • Enables Crank-Ready Designs
    • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input-Voltage Range

    MAXM17536
    4.5V to 60V, 4A High-Efficiency, DC-DC Step-Down SiP Power Module with Integrated Inductor

    • Reduces Design Complexity, Manufacturing Risks, and Time-to-Market
    • Saves Board Space in Space-Constrained Applications
    • Offers Flexibility for Power-Design Optimization

    MAX17576
    4.5V to 60V, 4A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20412
    Automotive Low-Voltage 2-Channel Step-Down Controller

    • 2-Channel, High-Efficiency DC-DC Controller in a Small Solution Size
    • High-Precision Regulator for Applications Processors
    • Low-Noise Features Reduce EMI

    MAX20343
    Ultra-Low Quiescent Current, Low Noise 3.5W Buck-Boost Regulator

    • Extend System Run Time
    • Low, Continuous Noise Profile
    • Adaptable Load Transient Response

    MAX20004E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20006E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX20008E
    36V, 220kHz to 2.2MHz, 4A/6A/8A Fully Integrated Automotive Step-Down Converters

    • Multiple Functions for Small Size
    • High Precision
    • Robust for the Automotive Environment

    MAX17630
    4.5V to 36V, 1A, High-Efficiency, Synchronous Step-Down DC-DC Converter

    • Reduces External Components and Total Cost
    • Reduces Number of DC-DC Regulators to Stock
    • Reduces Power Dissipation

    MAX20011
    Automotive Single 8A/12A Step-Down Converter with High Efficiency

    • High-Efficiency DC-DC Converter
    • Up to 12A peak output current:
    • Differential Remote Voltage Sensing

    MAX15158Z
    High-Voltage Multiphase Boost Controller

    • Wide Operating Range
    • Integration Reduces Design Footprint
    • Robust Fault Protection Improves Quality and Reliability

    MAX20079
    Automotive 36V 3.5A Buck Converter with 3.5μA IQ

    • Synchronous DC-DC Converter with Integrated FETs
    • Small Solution Size Saves Space
    • PGOOD Output and High-Voltage EN Input Simplify Power Sequencing

    MAX20026, MAX20026S
    汽车应用、四通道、低压、降压型DC-DC转换,带低噪声LDO

    • 高度集成减小方案尺寸
    • 设计性能支持汽车应用负载点调节
    • 低噪声特性改善EMI性能

    MAX20026S
    汽车应用、四通道、低压、降压型DC-DC转换,带低噪声LDO

    • 高度集成减小方案尺寸
    • 设计性能支持汽车应用负载点调节
    • 低噪声特性改善EMI性能

    MAX20801
    MPP跟踪DC-DC转换器

    • 对20-24个串联PV电池执行MPPT
    • 快速MPPT快速响应条件变化
    • 集成限压箝位输出电压

    MAX20800
    MPP跟踪DC-DC转换器

    • 对20-24个串联PV电池执行MPPT
    • 快速MPPT快速响应条件变化
    • 集成限压箝位输出电压

    MAX20059
    4.5V至76V、1A高效、同步降压型DC-DC转换器

    • 同步DC-DC转换器,集成FET
    • 设计灵活性
    • 低电平有效RESET输出和EN输入(最大26V)简化电源排序

    MAX20058
    60V、1A、汽车应用、同步降压型DC-DC转换器

    • 同步DC-DC转换器,集成FET
    • 设计灵活性
    • 低电平有效RESET输出和EN输入(最大26V)简化上电时序

    MAXM15065
    4.5V至60V、300mA、uSLIC降压型电源模块

    • 容易使用
    • 高效
    • 灵活的设计

    MAXM15066
    4.5V至60V、300mA、uSLIC降压型电源模块

    • 容易使用
    • 高效
    • 灵活的设计

    MAXM15067
    4.5V至60V、300mA、uSLIC降压型电源模块

    • 容易使用
    • 高效
    • 灵活的设计

    MAXM17904
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17905
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAXM17906
    4.5V to 24V, 300mA Himalaya uSLIC Step-Down Power Module

    • Easy to Use
    • High Efficiency
    • Flexible Design

    MAX20010C
    汽车应用、单通道、6A降压型转换器

    • 全集成、同步、6A DC-DC转换器,支持小方案尺寸
    • 高精度电压调节器,适用于应用处理器
    • 低噪声特性降低EMI

    MAX20010D
    汽车应用、单通道、6A降压型转换器

    • 全集成、同步、6A DC-DC转换器,支持小方案尺寸
    • 高精度电压调节器,适用于应用处理器
    • 低噪声特性降低EMI

    MAX20048
    汽车应用、40V、55µA IQ、2.2MHz、H桥、升/降压控制器

    • 满足严格的汽车级质量和可靠性要求
    • 高效、小尺寸方案
    • 低静态电流帮助设计师满足严格的OEM电流要求

    MAX20040
    汽车应用、2V至36V、2.2MHz、0.6A/1.2A升/降压转换器,集成H桥架构

    • 满足严格的汽车级质量和可靠性要求
    • 低静态电流帮助设计师满足严格的OEM电流要求(仅限B和D版本)
    • 高开关频率允许使用小尺寸外部元件

    MAX20039
    汽车应用、2V至36V、2.2MHz、0.6A/1.2A升/降压转换器,集成H桥架构

    • 满足严格的汽车级质量和可靠性要求
    • 低静态电流帮助设计师满足严格的OEM电流要求(仅限B和D版本)
    • 高开关频率允许使用小尺寸外部元件

    MAX20029B
    汽车应用、4/3/4通道、低压、降压型DC-DC转换器

    • 4通道降压型DC-DC转换器,带集成FET
    • 工作在3.0V至5.5V供电电压范围
    • 1.0V至4.0V固定或可调节输出电压

    MAX20029C
    汽车应用、4/3/4通道、低压、降压型DC-DC转换器

    • 4通道降压型DC-DC转换器,带集成FET
    • 工作在3.0V至5.5V供电电压范围
    • 1.0V至4.0V固定或可调节输出电压

    MAX20029, MAX20029B, MAX20029C
    汽车应用、4/3/4通道、低压、降压型DC-DC转换器

    • 4通道降压型DC-DC转换器,带集成FET
    • 工作在3.0V至5.5V供电电压范围
    • 1.0V至4.0V固定或可调节输出电压

    MAX77827
    5.5V输入、1.8A/3.1A开关升/降压转换器,6μA IQ

    • 1.8V至5.5V输入电压范围
    • 2.3V至5.3V单电阻可调节输出电压
    • 1.6A最大输出电流(3.1A ILIM选项,降压模式)