回到顶部

简单的SOT23封装boost控制器

产品详情

主要特征

Parametric specs for Step-Up Switching Regulators
VIN (V) (min) 2.5
VIN (V) (max) 5.5
VOUT1 (V) (min) 2.5
VOUT1 (V) (max) 100
IOUT1 (A) (max) 1
Switch Type External
Output Adjust. Method Resistor
ICC (mA) (typ) 0.025
Shutdown Mode Supply Current (µA) (typ) 0.001
Shutdown Mode Supply Current (µA) (max) 1
# DC-DC Outputs 1
Switching Frequency (kHz) 1000
Package/Pins SOT23/6
Budgetary
Price (See Notes)
1.79
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Step-Up Switching Regulators
VIN (V) (min) 2.5
VIN (V) (max) 5.5
VOUT1 (V) (min) 2.5
VOUT1 (V) (max) 100
IOUT1 (A) (max) 1
Switch Type External
Output Adjust. Method Resistor
ICC (mA) (typ) 0.025
Shutdown Mode Supply Current (µA) (typ) 0.001
Shutdown Mode Supply Current (µA) (max) 1
# DC-DC Outputs 1
Switching Frequency (kHz) 1000
Package/Pins SOT23/6
Budgetary
Price (See Notes)
1.79

主要特征

  • Simple, Flexible Application Circuit
  • 2-Cell NiMH or Alkaline Operation (MAX1524)
  • Low Quiescent Current (25µA typ)
  • Output Fault Protection and Soft-Start
  • High Efficiency Over 1000:1 IOUT Range
  • Pin-Selectable Maximum Duty Factor
  • Micropower Shutdown Mode
  • Small 6-Pin SOT23 Package
  • No Current-Sense Resistor

应用/用途

  • 工业+24V和+28V供电电源
  • LCD偏置电源
  • 低成本电池供电应用
  • 低成本、大电流或高电压升压转换器
  • 低成本、多输出反激式转换器
  • SEPIC转换器

描述

The MAX1522/MAX1523/MAX1524 are simple, compact boost controllers designed for a wide range of DC-DC conversion topologies, including step-up, SEPIC, and flyback applications. They are for applications where extremely low cost and small size are top priorities. These devices are designed specifically to provide a simple application circuit and minimize the size and number of external components, making them ideal for PDAs, digital cameras, and other low-cost consumer electronics applications.

These devices use a unique fixed on-time, minimum off-time architecture, which provides excellent efficiency over a wide-range of input/output voltage combinations and load currents. The fixed on-time is pin selectable to either 0.5µs (50% max duty cycle) or 3µs (85% max duty cycle), permitting optimization of external component size and ease of design for a wide range of output voltages.

The MAX1522/MAX1523 operate from a +2.5V to +5.5V input voltage range and are capable of generating a wide range of outputs. The MAX1524 is intended for bootstrapped operation, permitting startup with lower input voltage. All devices have internal soft-start and short-circuit protection to prevent excessive switching current during startup and under output fault conditions. The MAX1522/MAX1524 have a latched fault mode, which shuts down the controller when a short-circuit event occurs, whereas the MAX1523 reenters soft-start mode during output fault conditions. The MAX1522/MAX1523/MAX1524 are available in a space-saving 6-pin SOT23 package.

简化框图

MAX1522、MAX1523、MAX1524:典型工作电路 MAX1522、MAX1523、MAX1524:典型工作电路 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心