回到顶部
产品详情
主要特征
应用/用途
Parametric specs for Step-Down Switching Regulators
VIN (V) (min) | 2.7 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 0.6 |
VOUT1 (V) (max) | 5.17 |
IOUT1 (A) (max) | 12 |
Switch Type | Internal |
Output Adjust. Method | Dyn. REF In Resistor |
Synchronous Switching? | Yes |
Power Good Signal | Yes |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 1000 |
Package/Pins | WLP HC/24 |
Budgetary Price (See Notes) | 5.85 |
缩小
简化框图
Technical Docs
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Parametric specs for Step-Down Switching Regulators
VIN (V) (min) | 2.7 |
VIN (V) (max) | 5.5 |
VOUT1 (V) (min) | 0.6 |
VOUT1 (V) (max) | 5.17 |
IOUT1 (A) (max) | 12 |
Switch Type | Internal |
Output Adjust. Method | Dyn. REF In Resistor |
Synchronous Switching? | Yes |
Power Good Signal | Yes |
# DC-DC Outputs | 1 |
Switching Frequency (kHz) | 1000 |
Package/Pins | WLP HC/24 |
Budgetary Price (See Notes) | 5.85 |
主要特征
- Continuous 12A Output Current
- ±1% Feedback Accuracy Over Load, Line, and Temperature
- Operates from 2.7V to 5.5V Supply
- Input Undervoltage Lockout
- Adjustable Output Range from 0.6V Up to 0.94 x VIN
- Programmable Soft-Start
- Factory-Trimmed 1MHz Switching Frequency
- Stable with Low-ESR Ceramic Output Capacitors
- Safe-Startup into a Prebiased Output
- External Reference Input
- Selectable Skip Mode Option for Improved Efficiency at Light Loads
- Enable Input/PGOOD Output Allows Sequencing
- Remote Ground Sense for Improved Accuracy
- Thermal and Overcurrent Protection
- Tiny 2.10mm x 3.05mm, 24-Bump WLP Package
应用/用途
- 基站
- DDR存储器
- 分布式供电系统
- 笔记本电脑
- 线性稳压器的前置稳压
- 服务器
描述
The MAX15112 high-efficiency, current-mode step-down regulator with integrated power switches operates from 2.7V to 5.5V and delivers up to 12A of output current in a small 2mm x 3mm package. The MAX15112 offers excellent efficiency with skip mode capability at light-load conditions, yet provides unmatched efficiency under heavy load conditions. The combination of small size and high efficiency makes this device suitable for both portable and nonportable applications.
The MAX15112 utilizes a current-mode control architecture with a high-gain transconductance error amplifier, which allows a simple compensation scheme and enables a cycle-by-cycle current limit with fast response to line and load transients. A factory-trimmed switching frequency of 1MHz (PWM operation) allows for a compact, all-ceramic capacitor design.
Integrated switches with low on-resistance ensure high efficiency at heavy loads while minimizing critical inductances. The MAX15112’s simple layout and footprint assure first-pass success in new designs.
Other features of the MAX15112 include a capacitor-programmable soft-start to reduce inrush current, safe startup into a prebiased output, an enable input, and a power-good output for power sequencing.
The regulator is available in a 24-bump (4 x 6), 2.1mm x 3.05mm WLP package, and is fully specified over the -40°C to +85°C extended temperature range.
The MAX15112 utilizes a current-mode control architecture with a high-gain transconductance error amplifier, which allows a simple compensation scheme and enables a cycle-by-cycle current limit with fast response to line and load transients. A factory-trimmed switching frequency of 1MHz (PWM operation) allows for a compact, all-ceramic capacitor design.
Integrated switches with low on-resistance ensure high efficiency at heavy loads while minimizing critical inductances. The MAX15112’s simple layout and footprint assure first-pass success in new designs.
Other features of the MAX15112 include a capacitor-programmable soft-start to reduce inrush current, safe startup into a prebiased output, an enable input, and a power-good output for power sequencing.
The regulator is available in a 24-bump (4 x 6), 2.1mm x 3.05mm WLP package, and is fully specified over the -40°C to +85°C extended temperature range.
Technical Docs
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。