MAX15005, MAX15005A, MAX15005B, MAX15005C, MAX15005D

4.5V至40V输入、用于汽车电子的反激/boost/SEPIC电源控制器

汽车VFD电源,启动后可工作在低至2.5V的输入电压,为VFD提供输出过压保护


点击查看特定型号的库存状况。

说明

MAX15004A/B/MAX15005A/B是高性能、电流模式PWM控制器,可工作于4.5V至40V (抛负载)汽车级输入电压范围。如果IN自举到升压输出,启动后,输入电压可低于4.5V。该控制器集成了所有实现固定频率隔离/非隔离电源所需的控制模块。围绕MAX15004/MAX15005可以便利的设计通用boost、flyback、forward和SEPIC拓扑的变换器。

电流模式控制架构可提供优异的线路瞬态响应和逐周期限流,同时可简化频率补偿。可编程斜率补偿可进一步简化设计。60ns快速限流响应时间和低至300mV的限流门限使得控制器适用于高效、高频DC-DC变换器。该器件包含一个内部误差放大器以及精度为1%的基准,便于实现初级稳压单端flyback变换器或非隔离变换器。

转换频率可由外部阻容网络设置为15kHz至500kHz (MAX15004A/B为1MHz)。MAX15004A/B/MAX15005A/B提供了一个SYNC输入,可与外部时钟同步。MAX15004A/B的FET驱动器最大占空比为50%。通过选取适当的RT和CT组合,可设置MAX15005A/B的最大占空比。

输入电源的启动电压由输入欠压锁定(ON//OFF)设置,并可用于关断变换器使总的关断电流降低至10µA。保护措施包括周期性和打嗝式限流,输出过压保护和过热关断。

MAX15004A/B/MAX15005A/B提供节省空间的16引脚TSSOP封装和热增强型16引脚TSSOP-EP封装。所有器件都可工作于-40°C至+125°C汽车级温度范围。
MAX15004、MAX15005:典型工作电路 MAX15004、MAX15005:典型工作电路 放大+

关键特性

  • 宽电源电压范围满足汽车电源要求,包括“冷启动”
    • 4.5V至40V输入电压范围(如果将输入自举到升压输出,启动后可工作在较低电压)
  • 控制电路提供优异性能并简化设计
    • 电流模式控制
    • 限流电压门限低至300mV,精度为5%
    • 可编程斜率补偿
    • 最大占空比为50% (MAX15004)或可调(MAX15005)
  • 高精度、同步、可调节开关频率避免干扰敏感的无线电频段
    • 开关频率可调范围:15kHz至500kHz (MAX15005A/B为1MHz)
    • 开关频率可通过RC设置,精度为4%
    • 外部频率同步
  • 内部保护提高系统可靠性
    • 逐周期和打嗝式限流保护
    • 过压、热关断保护
    • -40°C至+125°C汽车级温度范围
    • 经过AEC-Q100认证

应用

  • 汽车
  • 隔离型反激、正激,非隔离型SEPIC、升压转换器
  • 真空管荧光灯显示器(VFD)电源

请查看具体的参数规格 Step-Up Switching Regulators (102)


Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
IOUT1
(A)
Switch Type
minmaxminmaxmax
MAX15004 4.5401.2310010External
MAX15005 

Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。

请查看具体的参数规格 Step-Down/Up Switching Regulators (33)


Part NumberVIN
(V)
VIN
(V)
VOUT1
(V)
VOUT1
(V)
IOUT1
(A)
Switch Type
minmaxminmaxmax
MAX15004 4.5401.2310010External
MAX15005 

MAX15005AEVKIT: MAX15005A评估板
申请可靠性报告: MAX15005  MAX15005A  MAX15005B  MAX15005C  MAX15005D 
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料


MAX17783C
4.5V to 60V, 2.5A, High Efficiency, Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20028
Step-Down Controller with Dual 2.1MHz Step-Down DC-DC Converters

  • High-Efficiency Voltage DC-DC Controller Saves Power
  • Dual 2.1MHz DC-DC Converters with Integrated FETs Saves Space
  • High Accuracy to Meet ASIL Specification

MAX77533
14V Input, 1.5A High-Efficiency Buck Converter with 9μA IQ

  • 1.5A Single Channel Buck Regulator
  • 3V to 14V Input Voltage Range
  • 0.8V to 99%VSUP Output Voltage Range

MAX20766
Smart Slave IC with Integrated Current and Temperature Sensors

  • Increased Power Density with Fewer External Components
  • Accurate Real-Time Telemetry of Critical Parameters
  • Advanced Self-Protection Features for the System and IC

MAX20796
Dual-Phase Scalable Integrated Voltage Regulator with PMBus Interface

  • Peak Efficiency 92%; Full-Load Efficiency 90% at VIN = 12V, VOUT = 1V
  • Operating Input Voltage Range 4.5V to 16V
  • Output Voltage Range is 0.5V to 5.5V

MAX17227A
400mV to 5.5V Input, 2A nanoPower Boost Converter with Short-Circuit Protection and True Shutdown

  • 350nA Quiescent Supply Current from Output
  • Output Short-Circuit Protection
  • True Shutdown Mode

MAX20030
Dual Buck, Sync Boost and LDO–Complete Front-End Power Supply with 17μA IQ

  • Meets Stringent OEM Module Power Consumption and Performance Specifications
  • Enables Crank-Ready Designs
  • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

MAX20031
Dual Buck, Sync Boost and LDO–Complete Front-End Power Supply with 17μA IQ

  • Meets Stringent OEM Module Power Consumption and Performance Specifications
  • Enables Crank-Ready Designs
  • EMI Reduction Features Reduce Interference with Sensitive Radio Bands without Sacrificing Wide Input Voltage Range

MAX25431
Automotive 40V, 2.2MHz, H-Bridge Buck-Boost Controller

  • Meets Stringent Automotive Quality and Reliability Requirements
  • Efficient Solution in a Small Solutions Size
  • Low Quiescent Current Helps Designers Meet Stringent OEM Current Requirements

MAX20710
Integrated, Step-Down Switching Regulator with PMBus

  • High Power Density and Low Component Count
  • Optimized Component Performance and Efficiency with Reduced Design-In Time
  • Increased Power-Supply Reliability with System and IC Self-Protection Features

MAX17760
4.5V to 76V, 300mA, High-Efficiency, Synchronous Step-Down DC-DC Converter

  • Reduces External Components and Total Cost
  • Reduces Number of DC-DC Regulators to Stock
  • Reduces Power Dissipation

MAX20430
Four-Output Mini PMIC for Safety Applications

  • Multiple Functions for Small Size
  • High-Precision for ASIL Applications
  • Diagnostics and Redundant Circuits

MAX18066
High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

  • Feature Integration Shrinks Solution Size
  • High Efficiency Conserves Power
  • Safe, Reliable, Accurate Operation

MAX18166
High-Efficiency, 4A, Step-Down DC-DC Regulator with Internal Power Switches

  • Feature Integration Shrinks Solution Size
  • High Efficiency Conserves Power
  • Safe, Reliable, Accurate Operation

MAX77511
10V输入、四相位、可配置、3A/相位、高效Buck转换器

  • 3A/相配置Buck调节器
  • 2.3V至10V输入电压范围
  • 0.25V至5.2V输出电压范围

MAX77711
10V输入、四相位、可配置、3A/相位、高效Buck转换器

  • 3A/相配置Buck调节器
  • 2.3V至10V输入电压范围
  • 0.25V至5.2V输出电压范围

MAX15158, MAX15158A
High-Voltage Multiphase Boost Controller

  • Wide Operating Range
  • Integration Reduces Design Footprint
  • Robust Fault Protection Improves Quality and Reliability

MAX15158A
High-Voltage Multiphase Boost Controller

  • Wide Operating Range
  • Integration Reduces Design Footprint
  • Robust Fault Protection Improves Quality and Reliability