回到顶部
产品详情
主要特征
应用/用途
Parametric specs for Battery Backup Circuits
Reset Thresh. (V) | 4.0 to 4.5 4.5 to 5.0 |
Reset Out | Active High Active Low Push-Pull |
ICC (µA) (max) | 110 |
Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
Package/Pins | PDIP/16 SOIC (W)/16 TSSOP/16 |
Budgetary Price (See Notes) | 3.7 |
缩小
简化框图
Technical Docs
数据资料 | 功能完备的微处理器监控电路,提供±1.5%的复位门限精度 | Mar 14, 2006 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Parametric specs for Battery Backup Circuits
Reset Thresh. (V) | 4.0 to 4.5 4.5 to 5.0 |
Reset Out | Active High Active Low Push-Pull |
ICC (µA) (max) | 110 |
Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
Package/Pins | PDIP/16 SOIC (W)/16 TSSOP/16 |
Budgetary Price (See Notes) | 3.7 |
主要特征
- Precision 4.675V (MAX807L), 4.425V (MAX807M), or 4.575V (MAX807N) Voltage Monitoring
- 200ms Power-OK/Reset Time Delay
- RESET-bar and RESET Outputs
- Independent Watchdog Timer
- 1µA Standby Current
- Power Switching
- 250mA in VCC Mode
- 20mA in Battery-Backup Mode
- On-Board Gating of Chip-Enable Signals;
- 2ns CE Gate Propagation Delay
- MaxCap® and SuperCap Compatible
- Voltage Monitor for Power Fail
- Backup-Battery Monitor
- Guaranteed active-low RESET Valid to VCC = 1V
- ±1.5% Low-Line Threshold Accuracy 52mV above Reset Threshold
应用/用途
- 计算机:台式机、工作站和服务器
- 控制器
- 精确的µP监控
- 智能仪表
- 便携式电池供电设备
描述
The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable propagation delay and 250mA output current capability (20mA in battery-backup mode) make it suitable for larger, higher-performance equipment.
The MAX807 comes in 16-pin DIP, SO, and TSSOP packages, and provides the following functions:
The MAX807 comes in 16-pin DIP, SO, and TSSOP packages, and provides the following functions:
µP reset. The active-low RESET output is asserted during power-up, power-down, and brownout conditions, and is guaranteed to be in the correct state for VCC down to 1V. Active-high RESET output. Manual-reset input. Two-stage power-fail warning. A separate low-line comparator compares VCC to a threshold 52mV above the reset threshold. This low-line comparator is more accurate than those in previous µP supervisors. Backup-battery switchover for CMOS RAM, real-time clocks, µPs, or other low-power logic. Write protection of CMOS RAM or EEPROM. 2.275V threshold detector provides for power-fail warning and low-battery detection, or monitors a power supply other than +5V. BATT OK status flag indicates that the backup-battery voltage is above +2.275V. Watchdog-fault outputasserted if the watchdog input has not been toggled within a preset timeout period.
Technical Docs
数据资料 | 功能完备的微处理器监控电路,提供±1.5%的复位门限精度 | Mar 14, 2006 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。