回到顶部

监视+3V电压、低成本、微处理器监控电路

产品详情

主要特征

Parametric specs for Supervisors (1 Monitored Voltage)
Reset Thresh. (V) 2.5 to 3.3
Reset Thresh. Accur. (%) (@ +25°C) 2.5
Reset Out Active High
Push-Pull
tRESET (min) 85ms to 300ms
Watchdog Feature Input (WDI)
Input/Output (WDI/WDO)
Watchdog Timeout 1s to 2s
Supervisor Features Adjustable Reset Input
Manual Reset
Power Fail Comparator/Low Battery Detect
ICC (µA) (max) 200
Package/Pins SOIC (N)/8
Budgetary
Price (See Notes)
2.03
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Supervisors (1 Monitored Voltage)
Reset Thresh. (V) 2.5 to 3.3
Reset Thresh. Accur. (%) (@ +25°C) 2.5
Reset Out Active High
Push-Pull
tRESET (min) 85ms to 300ms
Watchdog Feature Input (WDI)
Input/Output (WDI/WDO)
Watchdog Timeout 1s to 2s
Supervisor Features Adjustable Reset Input
Manual Reset
Power Fail Comparator/Low Battery Detect
ICC (µA) (max) 200
Package/Pins SOIC (N)/8
Budgetary
Price (See Notes)
2.03

主要特征

  • µMAX Package, Small 8-Pin SO
  • Precision Supply-Voltage Monitors
    • 2.63V (MAX706P/R, MAX706AP/AR, and MAX708R)
    • 2.93V (MAX706S, MAX706AS, and MAX708S)
    • 3.08V (MAX706T, MAX706AT, and MAX708T)
  • 200ms Reset Time Delay
  • Debounced TTL/CMOS-Compatible Manual Reset Input
  • 100µA Quiescent Current
  • WDI Disable Feature (MAX706AP/AR/AS/AT)
  • Watchdog Timer: 1.6s Timeout
  • Reset Output Signal:
    • Active-High Only (MAX706P, MAX706AP)
    • Active-Low Only (MAX706R/S/T, MAX706AR/AS/AT)
    • Active-High and Active-Low (MAX708R/S/T)
  • Voltage Monitor for Power-Fail or Low-Battery Warning
  • 8-Pin Surface-Mount Package
  • Guaranteed active-low RESET Assertion to VCC = 1V

应用/用途

  • 电池供电设备
  • 计算机
  • 控制器
  • 精确的µP电源监控
  • 智能仪表
  • 便携式仪表

描述

The MAX706P/R/S/T, MAX706AP/AR/AS/AT, and MAX708R/S/T microprocessor (µP) supervisory circuits reduce the complexity and number of components required to monitor +3V power-supply levels in +3V to +5V µP systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components.

The MAX706P/R/S/T and MAX706AP/AR/AS/AT supervisory circuits provide the following four functions:
    1) A reset output during power-up, power-down, and brownout conditions.
    2) An independent watchdog output that goes low if the watchdog input has not been toggled within 1.6s.
    3) A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than the main supply.
    4) An active-low, manual-reset input.
The only difference between the MAX706R/AR, MAX706S/AS, and MAX706T/AT is the reset-threshold voltage levels, which are 2.63V, 2.93V, and 3.08V, respectively. All have active-low reset output signals. The MAX706P/AP are identical to the MAX706R/AR, except the reset output signal is active-high. The watchdog timer function for the MAX706AP/AR/AS/AT disables when the WDI input is left open or connected to a high-impedance state of a low-leakage tri-state output.

The MAX708R/S/T provide the same functions as the MAX706R/S/T and MAX706AR/AS/AT except they do not have a watchdog timer. Instead, they provide both active-low RESET and RESET outputs. As with the MAX706, devices with R, S, and T suffixes have reset thresholds of 2.63V, 2.93V, and 3.08V, respectively.

These devices are available in 8-pin SO, DIP, and µMAX® packages and are fully specified over the operating temperature range.

简化框图

MAX706AP、MAX706AR、MAX706AS、MAX706AT、MAX706P、MAX706R、MAX706S、MAX706T、MAX708R、MAX708S、MAX708T:引脚配置 MAX706AP、MAX706AR、MAX706AS、MAX706AT、MAX706P、MAX706R、MAX706S、MAX706T、MAX708R、MAX708S、MAX708T:引脚配置 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心