回到顶部
产品详情
主要特征
应用/用途
Parametric specs for Battery Backup Circuits
Reset Thresh. (V) | 3.3 to 5.5 |
Reset Out | Active Low Push-Pull |
ICC (µA) (max) | 350 |
Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
Package/Pins | PDIP/8 SOIC (N)/8 |
Budgetary Price (See Notes) | 3.6 |
缩小
简化框图
Technical Docs
数据资料 | 低成本微处理器监控电路,具有备用电池控制器 | Jan 20, 2021 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Parametric specs for Battery Backup Circuits
Reset Thresh. (V) | 3.3 to 5.5 |
Reset Out | Active Low Push-Pull |
ICC (µA) (max) | 350 |
Oper. Temp. (°C) | -55 to +125 -40 to +85 0 to +70 |
Package/Pins | PDIP/8 SOIC (N)/8 |
Budgetary Price (See Notes) | 3.6 |
主要特征
- Battery-Backup Power Switching
- Precision Supply-Voltage Monitor
- 4.65V (MAX703)
- 4.40V (MAX704)
- 200ms Reset Pulse Width
- Debounced TTL/CMOS-Compatible Manual Reset Input
- 200µA Quiescent Current
- 50nA Quiescent Current in Battery-Backup Mode
- Voltage Monitor for Power-Fail or Low-Battery Warning
- 8-Pin DIP and SO Packages
- Guaranteed RESET-bar Assertion to VCC = 1V
应用/用途
- 计算机
- 控制器
- 精确的µP电源监控
- 智能仪表
描述
The MAX703/MAX704 microprocessor (µP) supervisory circuits reduce the complexity and number of components required for power-supply monitoring and battery control functions in µP systems. These devices significantly improve system reliability and accuracy compared to that obtained with separate ICs or discrete components.
The MAX703/MAX704 are available in 8-pin DIP and SO packages and provide four functions:
The MAX703/MAX704 are available in 8-pin DIP and SO packages and provide four functions:
- An active-low reset during power-up, power-down, and brownout conditions.
- Battery-backup switching for CMOS RAM, CMOS µPs, or other low-power logic circuitry.
- A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than +5V.
- An active-low manual reset input.
Technical Docs
数据资料 | 低成本微处理器监控电路,具有备用电池控制器 | Jan 20, 2021 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。