回到顶部

微处理器监控电路

工业标准、功能完备的µP监控电路

产品详情

主要特征

应用/用途

Parametric specs for Battery Backup Circuits
Reset Thresh. (V) 1.2 to 1.8
Reset Out Active High
Active Low
Push-Pull
ICC (µA) (max) 4000
Oper. Temp. (°C) -55 to +125
-40 to +85
0 to +70
Package/Pins CDIP/16
PDIP/16
SOIC (W)/16
Budgetary
Price (See Notes)
5.62
查看更多

简化框图

技术文档

数据资料 微处理器监控电路 Aug 01, 2014

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Battery Backup Circuits
Reset Thresh. (V) 1.2 to 1.8
Reset Out Active High
Active Low
Push-Pull
ICC (µA) (max) 4000
Oper. Temp. (°C) -55 to +125
-40 to +85
0 to +70
Package/Pins CDIP/16
PDIP/16
SOIC (W)/16
Budgetary
Price (See Notes)
5.62

主要特征

  • Adjustable Low-Line Monitor and Power-Down Reset
  • Power-OK/Reset Time Delay
  • Watchdog Timer—100ms, 1.6s, or Adjustable
  • Minimum Component Count
  • 1µA Standby Current
  • Battery-Backup Power Switching (MAX696)
  • On-Board Gating of Chip-Enable Signals (MAX697)
  • Separate Monitor for Power-Fail or Low-Battery Warning

应用/用途

  • 计算机
  • 控制器
  • 精确的µP电源监控
  • 智能仪表

描述

The MAX696/MAX697 supervisory circuits reduce the complexity and number of components required for power-supply monitoring and battery-control functions in microprocessor (µP) systems. These include µP reset and backup-battery switchover, watchdog timer, CMOS RAM write protection, and power-failure warning. The MAX696/MAX697 significantly improve system reliability and accuracy compared to that obtained with separate ICs or discrete components.

The MAX696 and MAX697 are supplied in 16-pin packages and perform six functions:
  1. A reset output during power-up, power-down, and brownout conditions. The threshold for this "lowline" reset is adjustable by an external voltage-divider.
  2. A reset pulse if the optional watchdog timer has not been toggled within a specified time.
  3. Individual outputs for low-line and watchdog fault conditions.
  4. The reset time may be left at its default value of 50ms, or may be varied with an external capacitor or clock pulses.
  5. A separate 1.3V threshold detector for power-fail warning, low-battery detection, or to monitor a power supply other than VCC.
The MAX696 also has battery-backup switching for CMOS RAM, CMOS microprocessor, or other low-power logic.

The MAX697 lacks battery-backup switching, but has write-protection pins (active-low CE IN and active-low CE OUT) for CMOS RAM or EPROM. In addition, it consumes less than 250 microamperes.

简化框图

MAX696、MAX697:原理框图 MAX696、MAX697:原理框图 Zoom icon

技术文档

数据资料 微处理器监控电路 Aug 01, 2014

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心