回到顶部

SOT23封装、电源排序器

用于双/多电压供电系统的电源排序器,控制电源的通/断,保证系统的高可靠性

产品详情

主要特征

应用/用途

Parametric specs for Power-Supply Sequencers and Voltage Trackers
# Input Channels 2
Interface Factory Fixed
R/C Adjustable
Option Sequence
VIN (V) (max) <6
Oper. Temp. (°C) -40 to +85
-40 to +125
0 to +70
Package/Pins SOT23/6
Budgetary
Price (See Notes)
2.72
查看更多

简化框图

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Power-Supply Sequencers and Voltage Trackers
# Input Channels 2
Interface Factory Fixed
R/C Adjustable
Option Sequence
VIN (V) (max) <6
Oper. Temp. (°C) -40 to +85
-40 to +125
0 to +70
Package/Pins SOT23/6
Budgetary
Price (See Notes)
2.72

主要特征

  • Adjustable Primary Supply Voltage Monitor (Monitors Down to 0.62V)
  • Internal Charge Pump to Enhance External Secondary Supply N-Channel MOSFET Switch
  • Delay from Primary Supply Good to Secondary Supply Enabled
    • Factory Fixed 200ms (MAX6819)
    • Capacitor Adjustable (MAX6820)
  • Logic Driven ENABLE Input (MAX6819)
  • Immune to Short Voltage Transients
  • Few External Components
  • -40°C to +125°C Operating Temperature Range
  • Small 6-Pin SOT23 Package

应用/用途

  • 数字信号处理
  • 双电压微处理器
  • 多电压系统
  • PowerPC®系列处理器

描述

The MAX6819/MAX6820 are power-supply sequencers for dual-voltage microprocessors (µPs) and multivoltage systems. These devices monitor a primary supply voltage and enable/disable an external N-channel MOSFET switch for a secondary supply voltage. The MAX6819/MAX6820 control local component voltage sequencing when system power-on/power-off characteristics cannot be guaranteed (supplies come from a multivoltage system bus, silver box, or must be sequenced in different modes for components on the same board). These small power-supply sequencers improve system reliability.

The MAX6819/MAX6820 include an internal voltage reference/comparator with externally adjustable thresholds to monitor the primary power supply. When the primary supply is below the desired threshold, an external secondary supply MOSFET switch is disabled. When the primary supply exceeds the threshold, an internal charge pump is activated and the external MOSFET switch is enabled to connect the secondary supply to the load. The charge pump fully enhances the N-channel MOSFET switch to provide a very low RDS-ON voltage drop. The devices can be connected to support various supply sequencing priorities such as VI/O before VCORE or VCORE before VI/O.

The MAX6819 features a logic-driven EN input to enable/disable the external MOSFET drive and includes an internally fixed 200ms enable timeout period (VPRIMARY GOOD to VSECONDARY ENABLE). The MAX6820 allows the enable timeout period to be adjusted with a single external capacitor. Both devices are specified over the automotive temperature range (-40°C to +125°C) and are available in space-saving 6-pin SOT23 packages.

简化框图

 

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心