/
/
/
电路监控、电压监测器及排序器 
/
回到顶部
MyMaxim 订阅产品详情
主要特征
应用/用途
Parametric specs for Supervisors (1 Monitored Voltage)
| Reset Thresh. (V) | 2.5 to 3.3 3.3 to 5.5 |
| Reset Out | Active Low Open Drain |
| tRESET (min) | 1ms to 15ms 15ms to 85ms 85ms to 300ms |
| Watchdog Feature | No Watchdog |
| ICC (µA) (max) | 12 |
| Package/Pins | SOT23/3 |
| Budgetary Price (See Notes) | 1.69 |
缩小
简化框图
Technical Docs
| 数据资料 | 3引脚、低功耗微处理器复位电路 | Mar 30, 2017 |
参量
Parametric specs for Supervisors (1 Monitored Voltage)
| Reset Thresh. (V) | 2.5 to 3.3 3.3 to 5.5 |
| Reset Out | Active Low Open Drain |
| tRESET (min) | 1ms to 15ms 15ms to 85ms 85ms to 300ms |
| Watchdog Feature | No Watchdog |
| ICC (µA) (max) | 12 |
| Package/Pins | SOT23/3 |
| Budgetary Price (See Notes) | 1.69 |
主要特征
- Ultra-Low 0.7V Operating Supply Voltage
- Low 4.0µA Supply Current
- Precision Monitoring of 2.85V to 5.0V Power-Supply Voltages
- Reset Thresholds Available from 2.63V to 4.80V, in Approximately 100mV Increments
- Fully Specified over Temperature
- Three Power-On Reset Timeout Periods Available (1ms min, 20ms min, 100ms min)
- Low Cost
- Three Available Output Structures: Push/Pull RESET, Push/Pull active-low RESET, Open-Drain active-low RESET
- Guaranteed RESET/active-low RESET Valid to VCC = 0.7V (MAX6800/MAX6801)
- Power-Supply Transient Immunity
- No External Components Required
- 3-Pin SOT23 Package
- Pin Compatible with MAX809/MAX810, MAX6326/MAX6327/MAX6328, and MAX6346/MAX6347/MAX6348
应用/用途
- 计算机
- 控制器
- 精确的μP/μC电源监控
- 智能仪表
- 便携式/电池供电设备
描述
The MAX6800/MAX6801/MAX6802 microprocessor (µP) supervisory circuits monitor the power supplies in 2.85V to 5.0V µP and digital systems. They increase circuit reliability and reduce cost by eliminating external components and adjustments.
These devices perform a single function—they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for a preset timeout period after VCC has risen above the reset threshold. The only difference among the three devices is their output. The MAX6801 (push/pull) and MAX6802 (open-drain) have an active-low RESET output, while the MAX6800 (push/pull) has an active-high RESET output. The MAX6800/MAX6801 are guaranteed to be in the correct state for VCC down to 0.7V. The MAX6802 is guaranteed to be in the correct state for VCC down to 1.0V.
The reset comparator in these ICs is designed to ignore fast transients on VCC. Reset thresholds are factory-trimmable between 2.63V and 4.80V, in approximately 100mV increments. These devices are available with a 1ms (min), 20ms (min), or 100ms (min) reset pulse width. Ideal for space-critical applications, the MAX6800/MAX6801/MAX6802 come packaged in a 3-pin SOT23. For a lower threshold voltage version, see the MAX6332/MAX6333/MAX6334.
These devices perform a single function—they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for a preset timeout period after VCC has risen above the reset threshold. The only difference among the three devices is their output. The MAX6801 (push/pull) and MAX6802 (open-drain) have an active-low RESET output, while the MAX6800 (push/pull) has an active-high RESET output. The MAX6800/MAX6801 are guaranteed to be in the correct state for VCC down to 0.7V. The MAX6802 is guaranteed to be in the correct state for VCC down to 1.0V.
The reset comparator in these ICs is designed to ignore fast transients on VCC. Reset thresholds are factory-trimmable between 2.63V and 4.80V, in approximately 100mV increments. These devices are available with a 1ms (min), 20ms (min), or 100ms (min) reset pulse width. Ideal for space-critical applications, the MAX6800/MAX6801/MAX6802 come packaged in a 3-pin SOT23. For a lower threshold voltage version, see the MAX6332/MAX6333/MAX6334.
Technical Docs
| 数据资料 | 3引脚、低功耗微处理器复位电路 | Mar 30, 2017 |
询价申请