回到顶部
产品详情
主要特征
应用/用途
Parametric specs for Supervisors (1 Monitored Voltage)
Reset Thresh. (V) | 1.8 to 2.5 2.5 to 3.3 |
Reset Thresh. Accur. (%) (@ +25°C) | 2.5 |
Reset Out | Active Low Open Drain |
tRESET (min) | <1ms |
Watchdog Feature | No Watchdog |
ICC (µA) (max) | 0.5 |
Package/Pins | SC70/3 SOT23/3 |
Budgetary Price (See Notes) | 1.02 |
缩小
简化框图
Technical Docs
数据资料 | 3引脚、超低功耗、SC70/SOT23封装电压检测器 | Apr 11, 2006 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Parametric specs for Supervisors (1 Monitored Voltage)
Reset Thresh. (V) | 1.8 to 2.5 2.5 to 3.3 |
Reset Thresh. Accur. (%) (@ +25°C) | 2.5 |
Reset Out | Active Low Open Drain |
tRESET (min) | <1ms |
Watchdog Feature | No Watchdog |
ICC (µA) (max) | 0.5 |
Package/Pins | SC70/3 SOT23/3 |
Budgetary Price (See Notes) | 1.02 |
主要特征
- Ultra-Low 500nA Supply Current (MAX6375/MAX6376/MAX6377)
- Thresholds Available from 2.20V to 4.63V in Approximately 100mV Increments
- ±2.5% Threshold Accuracy Over Temperature
- Low Cost
- Available in Three Versions: Push-Pull active-low OUT, Push-Pull OUT, and Open-Drain active-low OUT
- Power-Supply Transient Immunity
- No External Components
- Available in Either a 3-Pin SC70 or 3-Pin SOT23 Package
应用/用途
- 负载开关/顺序上电
- 便携式电池供电设备
- 数字/模拟系统的电源监视
- 精密电池监视
描述
The MAX6375-MAX6380 are ultra-low-power circuits used for monitoring battery, power-supply, and regulated system voltages. Each detector contains a precision bandgap reference, comparator, and internally trimmed resistors that set specified trip threshold voltages. These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring nominal system voltages from 2.5V to 5V.
These circuits perform a single function: they assert an output signal whenever the VCC supply voltage falls below a preset threshold. The devices are differentiated by their output logic configurations and preset threshold voltages. The MAX6375/MAX6378 (push-pull) and MAX6377/MAX6380 (open-drain) have an active-low output (active-low OUT is logic low when VCC is below VTH). The MAX6376/MAX6379 have an active-high push-pull output (OUT is logic high when VCC is below VTH). All parts are guaranteed to be in the correct output logic state for VCC down to 1V. The detector is designed to ignore fast transients on VCC. The MAX6375/MAX6376/ MAX6377 have voltage thresholds between 2.20V and 3.08V in approximately 100mV increments. The MAX6378/MAX6379/MAX6380 have voltage thresholds between 3.30V and 4.63V in approximately 100mV increments.
Ultra-low supply current of 500nA (MAX6375/MAX6376/MAX6377) makes these parts ideal for use in portable equipment. All six devices are available in a space-saving SC70 package or in a tiny SOT23 package.
These circuits perform a single function: they assert an output signal whenever the VCC supply voltage falls below a preset threshold. The devices are differentiated by their output logic configurations and preset threshold voltages. The MAX6375/MAX6378 (push-pull) and MAX6377/MAX6380 (open-drain) have an active-low output (active-low OUT is logic low when VCC is below VTH). The MAX6376/MAX6379 have an active-high push-pull output (OUT is logic high when VCC is below VTH). All parts are guaranteed to be in the correct output logic state for VCC down to 1V. The detector is designed to ignore fast transients on VCC. The MAX6375/MAX6376/ MAX6377 have voltage thresholds between 2.20V and 3.08V in approximately 100mV increments. The MAX6378/MAX6379/MAX6380 have voltage thresholds between 3.30V and 4.63V in approximately 100mV increments.
Ultra-low supply current of 500nA (MAX6375/MAX6376/MAX6377) makes these parts ideal for use in portable equipment. All six devices are available in a space-saving SC70 package or in a tiny SOT23 package.
Technical Docs
数据资料 | 3引脚、超低功耗、SC70/SOT23封装电压检测器 | Apr 11, 2006 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。