回到顶部
产品详情
主要特征
应用/用途
Parametric specs for Supervisors (2 Monitored Voltages)
Reset Thresh. (V) | 1.2 to 1.8 1.8 to 2.5 2.5 to 3.3 3.3 to 5.5 |
Reset Thresh. Accur. (%) (@ +25°C) | 1.5 |
Reset Out | Active Low Push-Pull |
Interface | Factory Fixed R/C Adjustable |
tRESET (min) | 1ms to 15ms 15ms to 85ms 85ms to 300ms >1s |
Watchdog Feature | No Watchdog |
Supervisor Features | Adjustable Reset Input Manual Reset |
ICC (µA) (max) | 16 |
Package/Pins | SOT23/5 |
Budgetary Price (See Notes) | 1.55 |
缩小
简化框图
Technical Docs
数据资料 | 5引脚、多输入、可编程复位IC | Aug 03, 2012 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
Parametric specs for Supervisors (2 Monitored Voltages)
Reset Thresh. (V) | 1.2 to 1.8 1.8 to 2.5 2.5 to 3.3 3.3 to 5.5 |
Reset Thresh. Accur. (%) (@ +25°C) | 1.5 |
Reset Out | Active Low Push-Pull |
Interface | Factory Fixed R/C Adjustable |
tRESET (min) | 1ms to 15ms 15ms to 85ms 85ms to 300ms >1s |
Watchdog Feature | No Watchdog |
Supervisor Features | Adjustable Reset Input Manual Reset |
ICC (µA) (max) | 16 |
Package/Pins | SOT23/5 |
Budgetary Price (See Notes) | 1.55 |
主要特征
- Small 5-Pin SOT23 Package
- Precision Factory-Set VCC Reset Thresholds; Available in 0.1V Increments from 2.5V to 5V
- Immune to Short VCC Transients
- Guaranteed Active-Low RESET Valid to VCC = 1V
- Guaranteed Over Temperature
- 8µA Supply Current
- Factory-Set Reset Timeout Delay from 1ms (min) to 1120ms (min)
- No External Components
- Manual Reset Input
- Under/Overvoltage Supply Monitoring
应用/用途
- 计算机:台式机、工作站和服务器
- 控制器
- 嵌入式控制系统
- 智能仪表
- 多电压系统:3V/5V、5V/12V、5V/24V
- 便携式电池供电设备
- 便携式计算机
描述
The MAX6305–MAX6313 CMOS microprocessor (µP) supervisory circuits are designed to monitor more than one power supply. Ideal for monitoring both 5V and 3.3V in personal computer systems, these devices assert a system reset if any of the monitored supplies falls outside the programmed threshold. Low supply current (15µA) and a small package suit them for portable applications. The MAX6305–MAX6313 are specifically designed to ignore fast transients on any monitored supply.
These devices are available in a SOT23-5 package, have factory-programmed reset thresholds from 2.5V to 5.0V (in 100mV increments), and feature four power-on reset timeout periods. Ten standard versions are available. Contact the factory for availability of non standard versions.
These devices are available in a SOT23-5 package, have factory-programmed reset thresholds from 2.5V to 5.0V (in 100mV increments), and feature four power-on reset timeout periods. Ten standard versions are available. Contact the factory for availability of non standard versions.
Technical Docs
数据资料 | 5引脚、多输入、可编程复位IC | Aug 03, 2012 |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。