回到顶部

nanoPower Supply Supervisors with Glitch-Free Power-Up

Only Glitch-free, Low Voltage, Nano-Power Reset IC

产品详情

主要特征

应用/用途

Parametric specs for Supervisors (1 Monitored Voltage)
Reset Thresh. (V) 0.6V to 4.85V
Reset Thresh. Accur. (%) (@ +25°C) 1.5
Reset Out Active Low
Open Drain
tRESET (min) 310us to 2s
Supervisor Features Glitch Free Power up
Package/Pins THIN WLP/4
Budgetary
Price (See Notes)
1.19
查看更多

简化框图

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Supervisors (1 Monitored Voltage)
Reset Thresh. (V) 0.6V to 4.85V
Reset Thresh. Accur. (%) (@ +25°C) 1.5
Reset Out Active Low
Open Drain
tRESET (min) 310us to 2s
Supervisor Features Glitch Free Power up
Package/Pins THIN WLP/4
Budgetary
Price (See Notes)
1.19

主要特征

  • No Powerup Glitch: (See Reliable Supervisor for Low-Voltage Processor Cores)
  • 825nA (typ) Quiescent Current Extends Battery Life
  • Positive and Negative Level-Triggered MR Input Options (MAX16161)
  • MR Debounce Circuitry (MAX16161)
  • Separate VCC and VIN Inputs (MAX16162)
  • Multiple Available Reset Timeout Periods
  • Threshold Voltage Options
  • 1.7V to 4.85V (MAX16161)
  • 0.6V to 4.85V (MAX16162)
  • 4-Bump WLP and 4-Pin SOT23 Packages
  • -40°C to +125°C Operating Temperature Range

应用/用途

  • e-Readers/Tablets
  • Low-Voltage Microcontrollers and Microprocessors
  • Portable/Battery-Powered Equipment
  • Smart Phones
  • Wearable/Portable Accessories

描述

The MAX16161/MAX16162 are ultra-low current, singlechannel supervisory ICs. The devices monitor the power supply voltage and assert a reset when the input voltage falls below the reset threshold. After the monitoring voltage rises above the factory-set threshold voltage (VTH), the reset output remains asserted for the reset timeout period and then deasserts, allowing the target microcontroller or microprocessor to leave the reset state and begin operating.

Unlike conventional supervisors, which are unable to control the reset output state when VCC is very low, the MAX16161/MAX16162 reset output is guaranteed to remain asserted until after a valid VCC is achieved. This is especially important to avoid low-voltage cores leaving the reset state during power-up or power-down. This also improves performance when using the MAX16161/ MAX16162 as simple power supply sequencers, because the devices will never cause a transient enable of a downstream power supply due to output glitches.

The MAX16161 features a manual reset (MR) input that asserts a reset when it receives an appropriate input signal, which may be either active-low or active-high, depending on the option. The MAX16162 has no MR input. Instead, it has separate VCC and VIN pins, allowing threshold voltages as low as 0.6V. The reset output is active- low open-drain, and the MAX16161/MAX16162 offer multiple available reset timeout period options.

The MAX16161/MAX16162 are specified over the -40°C to +125°C temperature range and are available in tiny, 1.06mm x 0.73mm, 4-bump WLP and 4-pin SOT23 packages.

简化框图

MAX16161, MAX16162: Typical Application Circuit MAX16161, MAX16162: Typical Application Circuit Zoom icon

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心