回到顶部

3.3V及5.0V MicroMonitor

产品详情

主要特征

Parametric specs for Supervisors (1 Monitored Voltage)
Reset Thresh. (V) 3.3 to 5.5
Reset Thresh. Accur. (%) (@ +25°C) 2.5
Reset Out Active High
Active Low
Push-Pull
tRESET (min) 85ms to 300ms
Watchdog Feature No Watchdog
Supervisor Features Adjustable Reset Input
Manual Reset
Power Fail Comparator/Low Battery Detect
ICC (µA) (max) 60
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes)
2.24
缩小

简化框图

Technical Docs

数据资料 3.3V及5.0V MicroMonitor May 06, 2005

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Supervisors (1 Monitored Voltage)
Reset Thresh. (V) 3.3 to 5.5
Reset Thresh. Accur. (%) (@ +25°C) 2.5
Reset Out Active High
Active Low
Push-Pull
tRESET (min) 85ms to 300ms
Watchdog Feature No Watchdog
Supervisor Features Adjustable Reset Input
Manual Reset
Power Fail Comparator/Low Battery Detect
ICC (µA) (max) 60
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes)
2.24

主要特征

  • Holds microprocessor in check during power transients
  • Automatically restarts microprocessor after power failure
  • Monitors pushbutton for external override
  • Accurate 5%, 10% or 20% resets for 3.3V systems and 5% or 10% resets for 5.0V systems
  • Eliminates the need for discrete components
  • 20% tolerance compatible with 3.0V systems
  • Pin compatible with the MAXIM MAX707/MAX708 in 8-pin DIP, 8-pin SO packages
  • 8-pin DIP, 8-pin and µSOP SO and 8-pin µSOP packages available
  • Industrial temperature range -40°C to +85°C

应用/用途

描述

The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature-compensated reference and comparator circuit monitor the status of VCC at the device and at an upstream point for maximum protection. When the sense input detects an out-of-tolerance condition a non-maskable interrupt is generated. As the voltage at the device degrades an internal power fail signal is generated which forces the reset to an active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for a minimum of 130ms to allow the power supply and processor to stabilize.

简化框图

DS1707、DS1708:原理框图 DS1707、DS1708:原理框图 Zoom icon

Technical Docs

数据资料 3.3V及5.0V MicroMonitor May 06, 2005

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心