回到顶部

MAX20333, MAX20333D, MAX20333G

Adjustable Current-Limit Switch with Low Power Mode

Extended 0perating Range Up to 22V with Adjustable Current-Limit Modes Provides a Highly Versatile Solution

产品详情

主要特征

应用/用途

Parametric specs for Current Limit and USB Power Switches
Current Limit (mA) (min) 200
Current Limit (mA) (max) 5500
# Power Switches 1
USB Yes
Fault Indicator Yes
Current Limit Accuracy (%) 7
Current Limit Set By Resistor
Lowest Adj. Setting (A) 0.2
RON (Ω) (typ) 0.023
VSUPPLY (V) (min) 3.5
VSUPPLY (V) (max) 22
Supported Charging Configurations USB-C
Oper. Temp. (°C) -40 to +85
Package/Pins THIN WLP/15
Budgetary
Price (See Notes)
0.91
查看更多

简化框图

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Current Limit and USB Power Switches
Current Limit (mA) (min) 200
Current Limit (mA) (max) 5500
# Power Switches 1
USB Yes
Fault Indicator Yes
Current Limit Accuracy (%) 7
Current Limit Set By Resistor
Lowest Adj. Setting (A) 0.2
RON (Ω) (typ) 0.023
VSUPPLY (V) (min) 3.5
VSUPPLY (V) (max) 22
Supported Charging Configurations USB-C
Oper. Temp. (°C) -40 to +85
Package/Pins THIN WLP/15
Budgetary
Price (See Notes)
0.91

主要特征

  • Flexible Operation
    • Wide Range of Programmable Current Limit (0.2A to 4.75A)
    • Wide Operating Range: 3.5V to 22V (MAX20333/A/ B/C/D/E/F/G/H/I/J/K), 3.3V to 22V (MAX20333L/M/ N)
    • Three Different Current-Limit Modes: NM, HCM, LPM
    • Three Different Current-Limit Behaviors: Autoretry, Latchoff, Continuous
    • Power Good Input
    • Current Monitoring
  • Safe Operation
    • Precision Current Limit
    • Output Short Protection
    • Thermal Protection
    • Flag Output
  • UL 2367 Recognized–File No. E211395
    • MAX20333/A/F/G Only
    • 4.9A/100W Maximum
  • Power Savings
    • Low Power Mode (LPM) with Output Short Protection

应用/用途

  • Battery Disconnect Switch
  • General Power Supply Switch
  • USB Port Protection Switch

描述

The MAX20333/A/B/C/D/E/F/G/H/I/J/K/L/M/N programmable current-limit switches feature internal current limiting to prevent damage to host devices due to faulty load conditions. These current limit switches feature a low 23mΩ (typ) on-resistance and operate from a +3.5V to +22V iinput voltage range (MAX20333/A/B/C/D/E/F/G/H/I/J/K), or +3.3V to +22V input voltage range (MAX20333L/M/N).

The MAX20333 family has three working modes: normal mode (NM), high current mode (HCM), and low power mode (LPM). In NM, the device offers a programmable current-limit protection from 0.2A to 4.75A. The current-limit threshold can be programmed by connecting a suitable resistor to the SETI bump. When the current reaches the programmed threshold, the part prevents the current to further increase. The device can react in three different ways while in current limit: autoretry, latchoff, and continuous. The voltage on the SETI bump is proportional to the current flowing out of the OUT bump at any time and can be read by an ADC.

In high current mode (HCM), the current-limit threshold is multiplied by two, with an internal upper limit set at 5.5A. The voltage on SETI is proportional to the current flowing into IN, but multiplied by a factor 0.5. In low power mode (LPM), the current consumption of the part is dramatically reduced, and the on-resistance is 420mΩ (typ), while still offering an overcurrent protection. The switch is open when the current flowing through the switch exceeds 0.4A (typ).

The devices are available in a 15-bump (2.1mm x 1.52mm) WLP package and operate over the -40°C to +85°C extended temperature range.

简化框图

MAX20333, MAX20333A: Typical Application Circuit MAX20333, MAX20333A: Typical Application Circuit Zoom icon

技术文档

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心