回到顶部

MAX1823, MAX1823A, MAX1823B, MAX1823H

双路、USB开关,带有故障屏蔽及自复位功能

产品详情

主要特征

Parametric specs for Current Limit and USB Power Switches
Current Limit (mA) (min) 720
Current Limit (mA) (max) 720
# Power Switches 2
USB Yes
Fault Indicator Yes
Current Limit Accuracy (%) 25
Current Limit Set By Preset
RON (Ω) (typ) 0.075
VSUPPLY (V) (min) 4
VSUPPLY (V) (max) 5.5
Oper. Temp. (°C) -40 to +85
Package/Pins See Data Sheet
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Current Limit and USB Power Switches
Current Limit (mA) (min) 720
Current Limit (mA) (max) 720
# Power Switches 2
USB Yes
Fault Indicator Yes
Current Limit Accuracy (%) 25
Current Limit Set By Preset
RON (Ω) (typ) 0.075
VSUPPLY (V) (min) 4
VSUPPLY (V) (max) 5.5
Oper. Temp. (°C) -40 to +85
Package/Pins See Data Sheet

主要特征

  • Dual USB Switch in Tiny 10-Pin µMAX Package
  • Autoreset Feature Saves Power
  • Guaranteed 720mA Load per Channel
  • Built-In 20ms Fault Blanking
  • Compliant to USB Specification
  • Blocks Reverse Current in Shutdown (MAX1823A/MAX1823B)
  • 4V to 5.5V Input Voltage Range
  • Independent Shutdown Control
    • (MAX1823/MAX1823A—Active Low)
    • (MAX1823B/MAX1823H—Active High)
  • Independent active-low FAULT Indicator Outputs
  • Thermal-Overload Protection
  • 50µA Quiescent Current (Both Switches On)
  • 3µA Standby Current

应用/用途

  • 坞站
  • 笔记本电脑与台式计算机
  • PDA与掌上电脑
  • USB端口和集线器

描述

The MAX1823 is a dual, current-limited switch with autoreset specifically made for USB applications. The autoreset feature latches the switch off if the output is shorted, saving system power. The switch reactivates when the short circuit is removed. Each channel is guaranteed to supply 720mA and meet USB specifications. Low quiescent supply current (50µA) and standby current (3µA) conserve battery power in portable applications.

The MAX1823 has multiple safety features to ensure that the USB port is protected. Built-in thermal-overload protection limits power dissipation and junction temperature. Accurate internal current-limiting circuitry protects the input supply against both overload and short-circuit conditions. Independent fault signals (active-low FAULTA and active-low FAULTB) notify the microprocessor (µP) when a thermal-overload, current-limit, undervoltage-lockout (UVLO), or short-circuit fault occurs. A 20ms fault-blanking feature ignores momentary faults, such as those caused when hot swapping a capacitive load, preventing false alarms to the host system. The MAX1823A/MAX1823B also block reverse current (current from OUT_ to IN_) while in shutdown.

The MAX1823 is available in a space-saving 10-pin µMAX® package. The MAX1823/MAX1823A are enabled with an active-low signal, and the MAX1823B/MAX1823H are enabled with an active-high signal. For a single version of this device, refer to the MAX1946 data sheet. For a triple version, refer to the MAX1940 data sheet.

简化框图

MAX1823、MAX1823A、MAX1823B、MAX1823H:功能框图 MAX1823、MAX1823A、MAX1823B、MAX1823H:功能框图 Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心