产品详情
主要特征
应用/用途
VIN (V) (min) | 2.7 |
VIN (V) (max) | 18 |
# Channels | 1 |
Circuit Breaker/ Current Limit | Both |
Circuit Breaker/Current Limit Threshold (mV) | Adjustable |
Fault Condition Control | Latched Off Periodic Retry |
Positive/Negative Rail | Positive |
Features | Analog Current Report Output Integrated MOSFET Programmable Soft start Programmable UVLO/Inrush Current Regulated at Startup with SOA Control Requires No RSENSE Undervoltage/Overvoltage Protection VariableSpeed/BiLevel Current Limit |
Package/Pins | WLP HC/40 |
Budgetary Price (See Notes) | 3.45 |
简化框图
Technical Docs
数据资料 | 2.7V to 18V, 15A, Hot-Swap Solution with Current Report Output | Aug 27, 2021 |
参量
VIN (V) (min) | 2.7 |
VIN (V) (max) | 18 |
# Channels | 1 |
Circuit Breaker/ Current Limit | Both |
Circuit Breaker/Current Limit Threshold (mV) | Adjustable |
Fault Condition Control | Latched Off Periodic Retry |
Positive/Negative Rail | Positive |
Features | Analog Current Report Output Integrated MOSFET Programmable Soft start Programmable UVLO/Inrush Current Regulated at Startup with SOA Control Requires No RSENSE Undervoltage/Overvoltage Protection VariableSpeed/BiLevel Current Limit |
Package/Pins | WLP HC/40 |
Budgetary Price (See Notes) | 3.45 |
主要特征
- Integration Reduces Solution Size for Blade Servers and Other Space-Constrained Designs
- Integrated 3.8mΩ (typ) Internal Power MOSFET Overvoltage Protection
- Power-Good and Fault Outputs
- Programmable Undervoltage Lockout
- Current Reporting Without Need for External RSENSE
- Thermal Protection
- Flexibility Enables Use in Many Unique Designs
- 2.7V to 18V Operating Voltage Range
- Adjustable Circuit-Breaker Current/Current-Limit Threshold
- Programmable Slew-Rate Control
- Variable-Speed Circuit-Breaker Response
- Latchoff (MAX15093) or Automatic Retry (MAX15093A) Options
- Safety Features Ensure Accurate, Robust Protection
- 15A Continuous Load Current Capability
- ±10% Circuit-Breaker Threshold Accuracy
- Inrush Current Regulated at Startup with Foldback
- Implementation for di/dt Control
- IN-to-OUT Short-Circuit Detection
应用/用途
- 磁盘驱动器供电
- 工业
- RAID系统
- 服务器I/O卡
- 存储器桥接
描述
The MAX15093/MAX15093A ICs are integrated solutions for hot-swap applications requiring the safe insertion and removal of circuit-line cards from a live backplane. The devices integrate a hot-swap controller, 3.8mΩ power MOSFET, and an electronic circuit-breaker protection in a single package.
The devices integrate an accurate current-sense circuitry and provide 160µA/A of proportional output current. The devices are designed for protection of 2.7V to 18V supply voltages.
These devices implement a foldback current limit during startup to control inrush current lowering di/dt and keep the MOSFET operating under safe operating area (SOA) conditions. After the startup cycle is complete, on-chip comparators provide VariableSpeed/BiLevel™ protection against short-circuit and overcurrent faults, and immunity against system noise and load transients. The load is disconnected in the event of a fault condition. The devices are factory calibrated to deliver accurate overcurrent protection with ±10% accuracy. During a fault condition, the MAX15093 latches off, while the MAX15093A enters autoretry mode.
The devices feature an IN-to-OUT short-circuit detection before startup. The devices provide a power-MOSFET GATE pin to program the slew rate during startup by adding an external capacitor. The devices have overvoltage/undervoltage input pins that can detect an overvoltage/undervoltage fault and disconnect the IN from the OUT. Additional features include internal overtemperature protection, power-good output, and fault-indicator output.
The MAX15093/MAX15093A ICs are available in a 40-bump, 2.57mm x 4.03mm, power wafer-level package (WLP) and are rated over the -40°C to +105°C extended temperature range.
Technical Docs
数据资料 | 2.7V to 18V, 15A, Hot-Swap Solution with Current Report Output | Aug 27, 2021 |