MAX5992B

Multisource, High-Power, High-Performance Powered Device Controllers

Flexible, High-Power PD Devices Deliver Up to 200W


点击查看特定型号的库存状况。

说明

The MAX5992A/MAX5992B multisource, high-power, high-performance powered device (PD) controllers provide a complete interface control for PDs to comply with the IEEE® 802.3af/at standard in a Power-over-Ethernet (PoE) system. The devices provide the PD with a detection signature, classification signature, and an isolation MOSFET driver with current-limit control. In addition, the intelligent maintain power signature (MPS) and active FET bridge control make the PD more power efficient. The devices feature a active-low SIG_OK output signal for high-power Multi-2P PD applications. The selectable inrush-current modes allow Multi-PD, fiber-to-the-home/fiber-to-the-building (FTTH/FTTB) operation in redundancy applications. The devices feature an input UVLO, wide hysteresis, and long deglitch time to compensate for twisted-pair cable resistive drop to assure glitch-free transition during power-on/power-off conditions. The devices can operate from a 20.8V low-voltage supply by a selectable UVLO. The devices can withstand up to 100V at the input.

The devices support a 2-Event classification method as specified in the IEEE 802.3at standard and provide a signal to indicate when probed by Type 2 power-sourcing equipment (PSE). The devices detect the presence of a wall adapter power-source connection and allow a smooth switchover from the PoE power source to the wall power adapter. Moreover, the selectable WAD_SEL supports seamless power transition from a wall adapter to PoE if PoE is already enabled.

The devices also provide a power-good (PG) signal, 2-level current limit, foldback, and overtemperature protection. A sleep mode feature provides low-power consumption while supporting MPS. An ultra-low power sleep mode feature further reduces power consumption to comply with ultra-low power requirements while still supporting MPS. The devices also feature an LED driver that is automatically activated during sleep/ultra-low power sleep/MPS mode. The MAX5992A has 38.6V PoE UVLO and the MAX5992B has 35.4V PoE UVLO and feature a 6.5s sleep mode delay.

The MAX5992A/MAX5992B are available in a 24-pin, 4mm x 4mm, TQFN power package and are rated over the -40°C to +85°C extended temperature range.
MAX5992A, MAX5992B: Simplified Block Diagram MAX5992A, MAX5992B: Simplified Block Diagram 放大+

关键特性

  • IEEE 802.3af/at Compliant
  • UPoE Compatible
  • High-Power 2x2P/Multi-PD Synchronization/Multi-PD Redundancy
  • Integrated Active FET Bridge Control and Back-Powering Protection
  • Selectable UVLO for Medical/Industrial Applications
  • 2-Level Inrush-Current Control
  • Intelligent MPS
  • Simplified Wall Adapter Interface for Seamless Power Transition
  • Ultra-Low-Power/Sleep Mode
  • 2-Event Classification or an External Wall Adapter Indicator Output
  • PoE Classification 0 to 5
  • Gate Driver for External Isolation MOSFET
  • Selectable Current Limit and Foldback
  • RJ45 12V Supply Input
  • 6.5s Sleep Mode Delay

应用

  • null
  • null
  • null
  • null
  • IP电话
  • null
  • null
  • null
  • null
  • 无线接入点

MAX5992AEVKIT: Evaluation Kit for the MAX5992A/MAX5992B

质量和环境数据

申请可靠性报告: MAX5992B 
无铅封装的锡(Sn)晶须报告

CAD Symbols and Footprints

  • MAX5992BETG+
  • 型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C  

    备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

    质量管理体系 >
    环境管理体系 >

     
    Status:
    Package:
    Temperature:

    相关资料


    MAX77654
    Ultra-Low Power PMIC Featuring Single-Inductor, 3-Output Buck-Boost, 2-LDOs, Power-Path Charger for Small Li+, and Ship Mode

    • Highly Integrated
    • Low Power
    • Charger Optimized for Small Battery Size

    MAX5992A
    Multisource, High-Power, High-Performance Powered Device Controllers

    • IEEE 802.3af/at Compliant
    • UPoE Compatible
    • High-Power 2x2P/Multi-PD Synchronization/Multi-PD Redundancy

    MAX5992B
    Multisource, High-Power, High-Performance Powered Device Controllers

    • IEEE 802.3af/at Compliant
    • UPoE Compatible
    • High-Power 2x2P/Multi-PD Synchronization/Multi-PD Redundancy