回到顶部
产品详情
主要特征
应用/用途
Parametric specs for Multifunction PMICs
VIN (V) (min) | 4 |
VIN (V) (max) | 28 |
# Step-Down Outputs | 1 |
# Step-Up Outputs | 2 |
# Inverting Outputs | 1 |
# LDO Outputs | 1 |
VOUT (V) (min) | -24 |
VOUT (V) (max) | 29 |
Package/Pins | TSSOP HYBRID/28 |
Budgetary Price (See Notes) | 2.82 |
缩小
简化框图
Technical Docs
数据资料 | 带有boost转换器和栅极稳压器的汽车应用TFT-LCD 电源 | Jan 05, 2012 |
参量
Parametric specs for Multifunction PMICs
VIN (V) (min) | 4 |
VIN (V) (max) | 28 |
# Step-Down Outputs | 1 |
# Step-Up Outputs | 2 |
# Inverting Outputs | 1 |
# LDO Outputs | 1 |
VOUT (V) (min) | -24 |
VOUT (V) (max) | 29 |
Package/Pins | TSSOP HYBRID/28 |
Budgetary Price (See Notes) | 2.82 |
主要特征
- Operating Voltage Range of 4V to 28V (Buck) or 3V to 5.5V (Boost)
- Independent 28V Input Buck Converter Powers TFT Bias Supply Circuitry and External Circuitry
- High-Power (Up to 6W) Boost Output Providing Up to 18V
- 1.8V or 3.3V Regulator Provides 500mA with External npn Transistor
- One Positive-Gate Voltage Regulator Capable of Delivering 20mA at 28V
- One Negative-Gate Voltage Regulator
- High-Frequency Operation
- 2.1MHz (Buck Converter)
- 2.2MHz (Boost Converter)
- Flexible Stand-Alone Sequencing
- True Shutdown™ Boost Converter
- 6μA Low-Current Shutdown Mode (Buck)
- Internal Soft-Start
- Overtemperature Shutdown
- -40°C to +105°C Operation
应用/用途
- 汽车中心显示器
- 汽车仪表盘
- 汽车导航系统
描述
The MAX16929 is a highly integrated power supply for automotive TFT-LCD applications. The device integrates one buck converter, one boost converter, one 1.8V/3.3V regulator controller, and two gate voltage regulators. The device comes in several versions to satisfy common automotive power-supply requirements (see the Ordering Information/Selector Guide table in the full data sheet).
Designed to operate from a single 4V to 28V supply or 5.5V to 28V supply, the device is ideal for automotive TFT-LCD applications. Both the buck and boost converters use spread-spectrum modulation to reduce peak interference and to optimize EMI performance.
The sequencing input (SEQ) allows flexible sequencing of the positive-gate and negative-gate voltage regulators. The power-good indicator (PGOOD) indicates a failure on any of the converters or regulator outputs. Integrated thermal shutdown circuitry protects the device from overheating.
The MAX16929 is available in a 28-pin TSSOP package with exposed pad, and operates over the -40°C to +105°C temperature range.
Designed to operate from a single 4V to 28V supply or 5.5V to 28V supply, the device is ideal for automotive TFT-LCD applications. Both the buck and boost converters use spread-spectrum modulation to reduce peak interference and to optimize EMI performance.
The sequencing input (SEQ) allows flexible sequencing of the positive-gate and negative-gate voltage regulators. The power-good indicator (PGOOD) indicates a failure on any of the converters or regulator outputs. Integrated thermal shutdown circuitry protects the device from overheating.
The MAX16929 is available in a 28-pin TSSOP package with exposed pad, and operates over the -40°C to +105°C temperature range.
Technical Docs
数据资料 | 带有boost转换器和栅极稳压器的汽车应用TFT-LCD 电源 | Jan 05, 2012 |