MAX14676A

Wearable Charge Management Solution

Extend Battery Life of Wearable Electronics


点击查看特定型号的库存状况。

说明

The MAX14676/MAX14676A are battery-charge-management solutions ideal for low-power wearable applications. These devices include a linear battery-charger with a Smart Power Selector, ModelGauge fuel gauge, and several power-optimized peripherals. They feature an ultra-low-power buck regulator with a quiescent current of 900nA (typical) and 74% efficiency with 10μA output.

The battery charger features Smart Power Selector operation, allowing operation with dead battery. It limits input current based on a register setting. If the charger power source is unable to supply the entire system load, the smart power control circuit will supplement the system load with current from the battery.

The MAX14676/MAX14676A embed a Maxim proprietary ModelGauge fuel gauge to provide an accurate estimate of the available capacity for rechargeable lithium batteries.

The MAX14676/MAX14676A include a synchronous high-efficiency step-down converter. The device features a fixed-frequency PWM mode for tighter regulation, and a burst mode for increased efficiency during light-load operation.

The MAX14676/MAX14676A have a boost regulator and three programmable current sinks that can be used to drive a variety of LED configurations. The boost converter is controlled independently from the current sinks, and they can be also used separately.

The MAX14676/MAX14676A feature a power switch controller that allows the device to be turned on and off by a pushbutton. This controller also provides a delayed reset signal and voltage sequencing.

These devices are available in a 42-bump, 0.5mm pitch, 3.497mm x 3.118mm wafer-level package (WLP).

关键特性

  • Extend System Use Time Between Battery Charging
    • 1.8V Low-IQ 200mA Buck Regulator
      • 0.9μA (typ) Quiescent Current
      • Automatic Burst or Forced-PWM Modes
    • ModelGauge with Accurate State-of-Charge
  • Easy-to-Implement Li+ Battery Charging
    • Smart Power Selector
    • 28V Tolerant Input
    • Thermistor Monitor
  • Minimize Power-Management Footprint though High Integration
    • 3.2V Low-IQ 100mA LDO
    • 2.0V Always-On 50μA LDO
    • +5V Safe Output LDO
    • 6.6V Low-IQ 120μA Charge Pump
  • Support a Wide Variety of Display Options
    • 5V to 17V Output Boost Converter
    • 3-Channel Adjustable High-Voltage Current Sinks
  • Optimize System Control
    • Pushbutton to Enable Ultra-Low-Power Mode and Power-On Voltage Sequencing
    • I2C Control

应用

  • 健身监测器
  • null
  • 便携式医疗设备
  • 可穿戴电子产品

请查看具体的参数规格 Multifunction PMICs (83)


Part NumberVIN
(V)
VIN
(V)
# Step-Down Outputs# Step-Up Outputs# LDO OutputsBattery Charger Features
(min)(max)
MAX14676 2.75.5112
Battery Charger
Charge Timer
Input Current Limit
Smart Pwr. Selector
Thermal Die Regulation
Thermistor Input
MAX14676A 

Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。
产品可靠性报告: MAX14676A.pdf 
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料