MAX20353

Wearable Power Management Solution

Optimized Power Management with Fuel Gauge for 24/7 Monitoring Systems such as Wearables and IoT


点击查看特定型号的库存状况。

说明

The MAX20353 is a highly integrated and programmable power management solution designed for ultra-low-power wearable applications. It is optimized for size and efficiency to enhance the value of the end product by extending battery life and shrinking the overall solution size. A flexible set of power-optimized voltage regulators, including multiple bucks, boost, buck-boost, and linear regulators, provides a high level of integration and the ability to create a fully optimized power architecture. The quiescent current of each regulator is specifically suited for 1µA (typ) to extend battery life in always-on applications.

The MAX20353 includes a complete battery management solution with battery seal, charger, power path, and fuel gauge. Both thermal management and input protection are built into the charger.

The device also includes a factory programmable button controller with multiple inputs that are customizable to fit specific product UX requirements.

Three integrated LED current sinks are included for indicator or backlighting functions, and an ERM/LRA driver with automatic resonance tracking is capable of providing sophisticated haptic feedback to the user.

The device is configurable through an I2C interface that allows for programming various functions and reading device status, including the ability to read temperature and supply voltages with the integrated ADC.

This device is available in a 56-bump, 0.5mm pitch 3.71mm x 4.21mm, wafer-level package (WLP) and operates over the -40°C to +85°C extended temperature range.

MAX20353: Typical Application Diagram MAX20353:Typical Application Diagram 放大+

关键特性

  • Extend Battery Use Time Between Battery Charging
    • 2 x Micro-IQ Buck Regulators (<1μA IQ (typ) Each)
      • 350mA Output
      • Buck1: 0.7V to 2.275V in 25mV Steps
      • Buck2: 0.7V to 3.85V in 50mV Steps
    • Micro-IQ LV LDO/Load Switch (1μA IQ (typ))
      • 1.16V to 2.0V Input Voltage
      • 50mA Output
      • 0.5V to 1.95V Output, 25mV Steps
    • Micro-IQ LDO/Load Switch (1μA IQ (typ))
      • 1.71V to 5.5V Input Voltage
      • 100mA Output
      • 0.9V to 4V, 100mV Steps
    • Micro-IQ Buck-Boost Regulator (1.3μA IQ (typ))
      • 250mW Output
      • 2.5V to 5V in 100mV Steps
  • Easy-to-Implement Li+ Battery Charging
    • Wide Fast Charge Current Range: 5mA to 500mA
    • Smart Power Selector
      • 28V/-5.5V Tolerant Input
      • Programmable JEITA Current/Voltage Profiles
  • Minimize Solution Footprint Through High Integration
    • Safe Output LDO
      • 15mA When CHGIN Present
      • 5V or 3.3V
    • Haptic Driver
      • ERM/LRA Driver with Quick Start And Stored Pattern RAM
      • Automatic Resonance Tracking (LRA only)
      • Closed Loop Automatic Braking (LRA only)
  • Support Wide Variety of Display Options
    • Micro-IQ Boost Regulator (2.4μA IQ (typ))
      • 300mW Output
      • 5V to 20V in 250mV Step
    • 3 Channel Current Sinks
      • 20V Tolerant
      • Programmable from 0.6 to 30mA
  • Optimize System Control
    • Power-On/Reset Controller
    • Programmable Push-Button Controller
    • Programmable Supply Sequencing
    • Factory Shelf Mode
    • On-Chip Voltage Monitor Multiplexer and Analog-to-Digital Converter (ADC)

应用

  • null
  • null

请查看具体的参数规格 Multifunction PMICs (81)


Part NumberPrimary TopologyMonitor/Control FeaturesDC-DC/Power FeaturesBattery Charger FeaturesInterface TypeVIN
(V)
VIN
(V)
VOUT
(V)
VOUT
(V)
Max. IOUT
(A)
Max. IOUT
(A)
Package/PinsBudgetary
Price
minmaxminmaxSee Notes
MAX20353 NEW!
Step-Down
Step-Up
Step-Up/Down
Dynamic V Adj.
Reset Output
Serial Interface
Shutdown
Adj. Frequency
Current Limit
Fixed Freq./PWM
Internal Switch
Soft Start
Sync. Rectifier
Battery Charger
Charge Timer
Input Current Limit
Smart Pwr. Selector
Thermal Die Regulation
Thermistor Input
USB Input
GPIO
I2C
2.7280.83.950.30.3
WLP/56
$5.59 @1k

Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。

MAX20353EVKIT: Evaluation Kit for the MAX20353
申请可靠性报告: MAX20353 
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料


MAX20353
Wearable Power Management Solution

  • Extend Battery Use Time Between Battery Charging
  • Easy-to-Implement Li+ Battery Charging
  • Minimize Solution Footprint Through High Integration