回到顶部

Compact Industrial Octal 1A/Quad 2A High-Side Switch with Diagnostics

Industry's Smallest Octal Industrial 1A/Quad 2A High Side Switch with Diagnostics

产品详情

主要特征

Parametric specs for Digital I/O
Digital Input/Output Digital Output
Interface Type Serial
# Channels 8
VSUPPLY (V) (min) 10
VSUPPLY (V) (max) 36
ISUPPLY (µA) (typ) 2
Current Limit (A) (min) 1.1
Current Limit (A) (max) 1.7
Load Current (A) (max) 1.1
Oper. Temp. (°C) -40 to +125
Package/Pins FC2QFN/48
Budgetary
Price (See Notes)
4.8
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Digital I/O
Digital Input/Output Digital Output
Interface Type Serial
# Channels 8
VSUPPLY (V) (min) 10
VSUPPLY (V) (max) 36
ISUPPLY (µA) (typ) 2
Current Limit (A) (min) 1.1
Current Limit (A) (max) 1.7
Load Current (A) (max) 1.1
Oper. Temp. (°C) -40 to +125
Package/Pins FC2QFN/48
Budgetary
Price (See Notes)
4.8

主要特征

  • Robustness and Smart Diagnostics
    • 65V Absolute Maximum Supply Range
    • Internal Clamps for Fast Inductive Load Demagnetization
    • CRC Error Checking on the SPI Interface
    • Watchdog Timer
    • Open-Wire Detection, Both with Switches On and Off
    • Undervoltage Detection with UVLO
    • Loss of VDD or GND Protection
    • Thermal Shutdown Protection
    • Integrated ±1kV/42Ω IEC61000-4-5 Surge Protection
    • -40°C to +125°C Operating Ambient Temperature
  • Reduces Power and Heat Dissipation
    • 250mΩ (max) On-Resistance at TA = 125°C
    • 2mA (typ) Supply Current
    • Accurate Output Current Limiting
  • Flexibility
    • Addressable SPI Interface Reduces Isolation Cost
    • SYNCH Input for Simultaneous Update of Switches
    • LED Driver Matrix for 16 LEDs, Powered by 24V, 5V, or 3.3V
    • Flexible Logic Voltage Interface from 2.5V to 5.5V
  • Compact 6mm x 6mm QFN Package

应用/用途

  • Industrial Digital Outputs
  • PLC Systems

描述

The MAX14916 has eight high-side switches specified to deliver up to 1.1A (min) continuous current per channel. The two adjacent channels can be paralleled to form four 2.4A high-side switches. The high-side switches have on-resistance of 250mΩ (max) at 125°C ambient temperature.

The SPI interface has a built-in chip addressing decoder, allowing communication with multiple MAX14916s utilizing a common SPI chip select (active-low CS pin pulled low).

The SPI interface provides flexibility for global and per-channel configuration and diagnostic, including undervoltage detection, open wire/load detection, overload and current limiting reporting, thermal conditions reporting, and more.

Open load detection detects both open-wire/open-load conditions with switches in the on and off states. LED drivers provide indication of per-channel fault, status, and supply undervoltage conditions. Internal active clamps allow for fast turn-off of inductive loads.

Integrated line-to-ground and line-to-line surge protection only requires a TVS on VDD. Integrated surge protection works for quad and octal configuration.

The MAX14916 is available in a compact 48-pin 6mm x 6mm QFN package.

简化框图

MAX14916: Simplified Block Diagram MAX14916: Simplified Block Diagram Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心