回到顶部
MyMaxim 订阅产品详情
Parametric specs for Linear Regulators
| VIN (V) (min) | 2.5 |
| VIN (V) (max) | 6.5 |
| Rated ILOAD (mA) | 150 |
| Preset VOUT (V) | 3 5 |
| Special Order Preset | 2.5 to 5.0 by 0.1 |
| # Regulators | 1 |
| VDROPOUT @Rated ILOAD (V) (typ) | 0.16 |
| ICC (µA) (max) | 180 |
| Output Voltage Noise (µV RMS) (typ) | 170 |
| Ref. Bypass | No |
| Low Batt./ Pwr. Fail Out | No |
| POK/Reset Thresh. (V) (nom) | Vout-5% |
| Watchdog | No |
| Reverse Batt. Protect. | Yes |
| Oper. Temp. (°C) | -40 to +85 |
| Package/Pins | SOT23/5 |
| Budgetary Price (See Notes) | 0.86 |
缩小
简化框图
Technical Docs
| 数据资料 | 150mA、低压差线性稳压器，带有电源就绪指示输出 | Oct 01, 1999 | |
| 应用笔记 | Selecting LDO Linear Regulators for Cellphone Designs |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
参量
Parametric specs for Linear Regulators
| VIN (V) (min) | 2.5 |
| VIN (V) (max) | 6.5 |
| Rated ILOAD (mA) | 150 |
| Preset VOUT (V) | 3 5 |
| Special Order Preset | 2.5 to 5.0 by 0.1 |
| # Regulators | 1 |
| VDROPOUT @Rated ILOAD (V) (typ) | 0.16 |
| ICC (µA) (max) | 180 |
| Output Voltage Noise (µV RMS) (typ) | 170 |
| Ref. Bypass | No |
| Low Batt./ Pwr. Fail Out | No |
| POK/Reset Thresh. (V) (nom) | Vout-5% |
| Watchdog | No |
| Reverse Batt. Protect. | Yes |
| Oper. Temp. (°C) | -40 to +85 |
| Package/Pins | SOT23/5 |
| Budgetary Price (See Notes) | 0.86 |
主要特征
- Optimized for Low-Cost Tantalum Capacitors
- Pin Compatible with MIC5206
- Undervoltage Power-OK Output
- Preset Output Voltages (±1% accuracy)
- Guaranteed 150mA Output Current
- 85µA No-Load Supply Current
- Low 110mV Dropout at 100mA Load (165mV at 150mA load)
- Thermal-Overload and Short-Circuit Protection
- Reverse-Battery Protection
- 60dB PSRR at 100Hz
- 1µA max Shutdown Current
应用/用途
- 蜂窝电话
- 无绳电话
- 电子规划器
- 手持式仪表(PDA、掌上电脑)
- 调制解调器
- 掌上电脑
- PCMCIA卡
- PCS电话
描述
The MAX8885 low-dropout (LDO) linear regulator operates from a +2.5V to +6.5V input voltage range and delivers up to 150mA. It uses a P-channel MOSFET pass transistor to allow a low 85µA supply current-which is independent of the load-as well as LDO voltage. The MAX8885 is optimized to operate with low-cost, high-ESR output capacitors such as small case-size tantalum capacitors. It is ideal for cost-sensitive portable equipment such as PCS and cellular phones. For a pin-compatible, functionally equivalent device for use with a low-ESR, ceramic output capacitor, refer to the MAX8875 data sheet.
The MAX8885 features a power-OK output that indicates when the output is out of regulation, and is available in preset output voltage versions of 5.0V, 3.3V, 3.0V, 2.7V, and 2.5V. Other features include 1µA (max) shutdown current, short-circuit protection, thermal shutdown protection, and reverse-battery protection. The MAX8885 is available in a miniature 5-pin SOT23 package.
The MAX8885 features a power-OK output that indicates when the output is out of regulation, and is available in preset output voltage versions of 5.0V, 3.3V, 3.0V, 2.7V, and 2.5V. Other features include 1µA (max) shutdown current, short-circuit protection, thermal shutdown protection, and reverse-battery protection. The MAX8885 is available in a miniature 5-pin SOT23 package.
Technical Docs
| 数据资料 | 150mA、低压差线性稳压器，带有电源就绪指示输出 | Oct 01, 1999 | |
| 应用笔记 | Selecting LDO Linear Regulators for Cellphone Designs |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
询价申请