回到顶部

5V/3.3V或可调、低压差、低IQ、200mA线性稳压器,具有待机模式

250mA LDO,任何负载和压差下耗电仅为11µA

产品详情

The MAX882/MAX883/MAX884 linear regulators maximize battery life by combining ultra-low supply currents and low dropout voltages. They feature 200mA output current capability at up to +125°C junction temperature and come in a 1.5W SOIC package. The 1.5W package (compared to 0.47W for standard SOIC packages) allows a wider operating range for the input voltage and output current. The MAX882/MAX883/MAX884 use a p-channel MOSFET pass transistor to maintain a low 11µA (15µA max) supply current from no-load to the full 200mA output. Unlike earlier bipolar regulators, there are no PNP base current losses that increase with output current. In dropout, the MOSFET does not suffer from excessive base currents that occur when PNP transistors go into saturation. Typical dropout voltages are 220mV at 5V and 200mA, or 320mV at 3.3V and 200mA.

The MAX882 features a 7µA standby mode that disables the output but keeps the reference, low-battery comparator, and biasing circuitry alive. The MAX883/MAX884 feature a shutdown (OFF) mode that turns off all circuitry, reducing supply current to less than 1µA. All three devices include a low-battery-detection comparator, fold-back current limiting, reverse-current protection, and thermal-overload protection.

The output is preset at 3.3V for the MAX882/MAX884 and 5V for the MAX883. In addition, all devices employ Dual Mode™ operation, allowing user-adjustable outputs from 1.25V to 11V using external resistors. The input voltage supply range is 2.7V to 11.5V.

For low-dropout linear regulators with output currents up to 500mA, refer to the MAX603/MAX604 data sheet.

主要特征

  • Foldback Current Limiting
  • High-Power (1.5W) 8-Pin SO Package
  • Dual Mode Operation: Fixed or Adjustable Output from 1.25V to 11V
  • Large Input Range (2.7V to 11.5V)
  • Internal 1.1Ω p-Channel Pass Transistor Draws No Base Current
  • Low 220mV Dropout Voltage at 200mA Output Current
  • 11µA (typ) Quiescent Current
  • 1µA (max) Shutdown Mode or 7µA (typ) Standby Mode
  • Low-Battery Detection Comparator
  • Reverse-Current Protection
  • Thermal-Overload Protection

应用/用途

  • 1.25V至11V可调节的稳压器
  • 3.3V及5V稳压器
  • 汽车电子
  • 高效线性稳压器
  • 寻呼机及蜂窝电话
  • 便携式仪表
  • 太阳能供电仪表
Parametric specs for Linear Regulators
VIN (V) (min) 2.7
VIN (V) (max) 11.5
Adj. VOUT (V) (min) 1.25
Adj. VOUT (V) (max) 11
Rated ILOAD (mA) 200
Preset VOUT (V) 3.3
# Regulators 1
VDROPOUT @Rated ILOAD (V) (typ) 0.32
ICC (µA) (max) 15
Output Voltage Noise (µV RMS) (typ) 250
Ref. Bypass No
Low Batt./ Pwr. Fail Out Yes
Watchdog No
Reverse Batt. Protect. No
Oper. Temp. (°C) -40 to +85
0 to +70
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes)
$1.81 @1k
查看更多

简化框图

MAX882、MAX883、MAX884:典型工作电路 MAX882、MAX883、MAX884:典型工作电路 Zoom icon

技术文档

设计与质量

单击下面的标题以查看详情页面

/cn/design/design-tools/ee-sim.html?

支持和培训

在Maxim的知识库中搜索您所需的答案。

过滤搜索

Maxim专业的应用工程师团队也可以为您解答技术问题,请 访问Maxim的 支持中心

参量

Parametric specs for Linear Regulators
VIN (V) (min) 2.7
VIN (V) (max) 11.5
Adj. VOUT (V) (min) 1.25
Adj. VOUT (V) (max) 11
Rated ILOAD (mA) 200
Preset VOUT (V) 3.3
# Regulators 1
VDROPOUT @Rated ILOAD (V) (typ) 0.32
ICC (µA) (max) 15
Output Voltage Noise (µV RMS) (typ) 250
Ref. Bypass No
Low Batt./ Pwr. Fail Out Yes
Watchdog No
Reverse Batt. Protect. No
Oper. Temp. (°C) -40 to +85
0 to +70
Package/Pins PDIP/8
SOIC (N)/8
Budgetary
Price (See Notes)
$1.81 @1k

主要特征

  • Foldback Current Limiting
  • High-Power (1.5W) 8-Pin SO Package
  • Dual Mode Operation: Fixed or Adjustable Output from 1.25V to 11V
  • Large Input Range (2.7V to 11.5V)
  • Internal 1.1Ω p-Channel Pass Transistor Draws No Base Current
  • Low 220mV Dropout Voltage at 200mA Output Current
  • 11µA (typ) Quiescent Current
  • 1µA (max) Shutdown Mode or 7µA (typ) Standby Mode
  • Low-Battery Detection Comparator
  • Reverse-Current Protection
  • Thermal-Overload Protection

应用/用途

  • 1.25V至11V可调节的稳压器
  • 3.3V及5V稳压器
  • 汽车电子
  • 高效线性稳压器
  • 寻呼机及蜂窝电话
  • 便携式仪表
  • 太阳能供电仪表

描述

The MAX882/MAX883/MAX884 linear regulators maximize battery life by combining ultra-low supply currents and low dropout voltages. They feature 200mA output current capability at up to +125°C junction temperature and come in a 1.5W SOIC package. The 1.5W package (compared to 0.47W for standard SOIC packages) allows a wider operating range for the input voltage and output current. The MAX882/MAX883/MAX884 use a p-channel MOSFET pass transistor to maintain a low 11µA (15µA max) supply current from no-load to the full 200mA output. Unlike earlier bipolar regulators, there are no PNP base current losses that increase with output current. In dropout, the MOSFET does not suffer from excessive base currents that occur when PNP transistors go into saturation. Typical dropout voltages are 220mV at 5V and 200mA, or 320mV at 3.3V and 200mA.

The MAX882 features a 7µA standby mode that disables the output but keeps the reference, low-battery comparator, and biasing circuitry alive. The MAX883/MAX884 feature a shutdown (OFF) mode that turns off all circuitry, reducing supply current to less than 1µA. All three devices include a low-battery-detection comparator, fold-back current limiting, reverse-current protection, and thermal-overload protection.

The output is preset at 3.3V for the MAX882/MAX884 and 5V for the MAX883. In addition, all devices employ Dual Mode™ operation, allowing user-adjustable outputs from 1.25V to 11V using external resistors. The input voltage supply range is 2.7V to 11.5V.

For low-dropout linear regulators with output currents up to 500mA, refer to the MAX603/MAX604 data sheet.

简化框图

MAX882、MAX883、MAX884:典型工作电路 MAX882、MAX883、MAX884:典型工作电路 Zoom icon

技术文档

支持和培训

在Maxim的知识库中搜索您所需的答案。

过滤搜索

Maxim专业的应用工程师团队也可以为您解答技术问题,请 访问Maxim的 支持中心