回到顶部

高精度、低压差线性稳压器

低噪声、低压差、1A线性稳压器,具有低于2mV的电源电压瞬变

产品详情

主要特征

应用/用途

简化框图

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

主要特征

  • Fixed Outputs
    • 3.3V (MAX687/MAX688)
    • 3.0V (MAX689)
  • Directly Drives External PNP Transistor
  • 10mA Min Base-Current Drive for > 1A Output
  • Low Dropout Voltage:
    • 100mV Dropout at 650mA Output (FZT749)
    • 40mV Dropout at 200mA Output (FZT749)
    • 0.8V Dropout at 4A Output
  • Power-Fail Output Monitors the Output Voltage
  • Automatic, Latched Shutdown when Output Falls Out of Regulation (MAX687)
  • Precision Threshold Shutdown Control (MAX688/MAX689)
  • Low Supply Current:
    • 150µA Operating
    • < 1µA Shutdown
  • 2.7V to 11.0V Supply Range
  • 8-Pin DIP/SO/µMAX® Packages
  • < 2mV Line Transient with 3.4V to 3.6V Input
  • Output Accuracy < ±2%

应用/用途

  • 汽车电子
  • 高效线性稳压器
  • 便携式仪表
  • 便携式电话
  • 存储器电源或备用电源

描述

The MAX687/MAX688/MAX689 low-dropout linear regulators operate with an input-to-output voltage differential limited only by an external PNP transistor. Outputs are fixed at 3.3V (MAX687/MAX688) or 3.0V (MAX689). The only external components required are a PNP pass transistor and output, compensation, and bypass capacitors. Base drive to the external transistor is at least 10mA, permitting output currents to exceed 1A when using high-gain transistors (β > 100). Output current limiting is implemented by limiting the external transistor's base current. Output voltage monitoring and shutdown functions are included.

The 3.3V MAX687 automatically shuts down whenever the output voltage drops below 2.96V. An internal power-fail comparator also monitors the output and provides an early warning of low output voltage before the device shuts down. When shut down, the output is latched off until the ON input is pulsed. Turning off the power supply in this way prevents battery damage due to excessive discharge or cell-reversal. Typical applications include portable telephones and other battery-powered equipment where the power supply must be disabled when the battery voltage is low.

The MAX688 and MAX689 do not have an automatic shutdown function, and are identical except for their output voltages. Each device has an active-low shutdown-control input, used to turn its output on or off at any time. As active-low SHDN falls, the device enters a standby mode before fully shutting down. When in standby, the reference and comparators are fully operational, permitting the transition from normal mode to standby mode to occur at a precise voltage level on active-low SHDN.

简化框图

MAX687、MAX688、MAX689:典型工作电路 MAX687、MAX688、MAX689:典型工作电路 Zoom icon

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心