回到顶部

4.2V–60V, No-Opto Isolated Flyback Converter with Integrated FET

Reduce Solution Size and Component Count by Up to 30%

产品详情

主要特征

缩小
Parametric specs for Isolated Power Supplies
VIN (V) (min) 4.2
VIN (V) (max) 60
Topology Flyback
Application (VIN) Base Station (24V)
Industrial (24V)
Networking (48V)
Power Over Ethernet (32-58V)
Switch Type Internal
Feedback Primary Side
Switching Frequency (kHz) 100-300
Oper. Temp. (°C) -40 to +125
Package/Pins TDFN-CU/12
Budgetary
Price (See Notes)
1.12
缩小

简化框图

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心

参量

Parametric specs for Isolated Power Supplies
VIN (V) (min) 4.2
VIN (V) (max) 60
Topology Flyback
Application (VIN) Base Station (24V)
Industrial (24V)
Networking (48V)
Power Over Ethernet (32-58V)
Switch Type Internal
Feedback Primary Side
Switching Frequency (kHz) 100-300
Oper. Temp. (°C) -40 to +125
Package/Pins TDFN-CU/12
Budgetary
Price (See Notes)
1.12

主要特征

  • Reduces External Components and Total Cost
    • Eliminates the Optocoupler and Secondary-Side Error Amplifier
    • Up to 20% Space Savings
    • 76V, Low RDSON Integrated nMOSFET
    • Internal Loop Compensation (MAX17692A)
    • Built-In Soft-Start
  • Reduces Power Dissipation
    • Delivers up to 3.5W Output Power
    • Frequency Fold-Back Enables Enhanced Light- Load Efficiency
    • 2.5μA Shutdown Current
  • Supports Key System-Level Design Requirements
    • Frequency Dithering Supports Low-EMI, Spread- Spectrum Operation
    • Switching Frequency Synchronization to External Clock
  • Operates Reliably in Adverse Environments
    • Output Diode Forward Voltage Temperature Compensation
    • Hiccup Current-Limit Protection
    • Programmable EN/UVLO Threshold
    • Input Overvoltage (OVI) Protection (MAX17692A)
    • Overtemperature Protection
    • High Industrial -40°C to +125°C Ambient Operating Temperature Range/ -40°C to +150°C Junction Temperature Range

应用/用途

  • 隔离电源
  • PLC I/O模块
  • IGBT栅极驱动电源
  • 工业和电信应用

描述

Maxim's Rainier family of isolated power devices enable cooler, smaller, and simpler power-supply solutions. The MAX17692A/B is a high efficiency no-opto integrated nMOSFET flyback converter that uses fixed frequency peak current mode control. The device senses the isolated output voltage directly from the primary-side flyback waveform during the secondary-side rectifier conduction. No secondary-side error amplifier and optocoupler are required to provide an accurate, isolated, regulated output voltage, saving up to 20% of PCB space normally required for a traditional flyback converter.

The MAX17692A/B features a low RDSON, 76V, 205mΩ integrated nMOSFET primary switch and is designed to operate over a wide supply range from 4.2V to 60V. The switching frequency of the device is programmable from 100kHz to 350kHz. An EN/UVLO feature allows the user to turn ON/OFF the power converter precisely at the desired input voltage. Input overvoltage protection can be implemented using the OVI pin (MAX17692A only). Softstart limits inrush current at startup. The MAX17692A/B supports external clock synchronization to avoid low-frequency “beats” on the input bus in systems with multiple converters. The device also has programmable frequency dithering for low-EMI, spread-spectrum operation.

The MAX17692A/B allows temperature compensation for variations in the output rectifier diode forward voltage drop. The MAX17692A is internally compensated for loop stability, while the MAX17692B offers external loop compensation flexibility. The MAX17692A/B has robust hiccup- protection and thermal protection schemes, and is available in a space-saving 12-pin, 3mm x 3mm TDFN package with a temperature range from -40°C to +125°C.

简化框图

MAX17692A, MAX17692B: Typical Application Circuit MAX17692A, MAX17692B: Typical Application Circuit Zoom icon

Technical Docs

支持和培训

在Maxim的知识库中搜索技术问题的答案

过滤搜索

Maxim的专业工程师团队也会为您解答相应的技术问题,请访问Maxim的 支持中心