产品详情
主要特征
应用/用途
VIN (V) (min) | 2.6 |
VIN (V) (max) | 5.5 |
# Step-Down Outputs | 2 |
# Step-Up Outputs | 2 |
VOUT (V) (min) | -10 |
VOUT (V) (max) | 12 |
Package/Pins | TQFN-CU/32 |
Budgetary Price (See Notes) | 3.71 |
简化框图
Technical Docs
数据资料 | Automotive 4-Channel TFT-LCD Power Supply with VCOM Buffer and ASIL B Features | Nov 12, 2021 | |
Solution Guide | LED Driver for Automotive Display Applications | ||
Solution Guide | TFT-Bias for Automotive Applications |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
VIN (V) (min) | 2.6 |
VIN (V) (max) | 5.5 |
# Step-Down Outputs | 2 |
# Step-Up Outputs | 2 |
VOUT (V) (min) | -10 |
VOUT (V) (max) | 12 |
Package/Pins | TQFN-CU/32 |
Budgetary Price (See Notes) | 3.71 |
主要特征
- High Integration
- Synchronous Boost Provides AVDD of 4.2V to 10.5V at up to 200mA
- NAVDD Inverter Output at up to -200mA
- 15mA VGON Output (7.6V to 20.2V) from 3x Regulated Charge Pump
- VGOFF (-18.2V to -5.6V) from Regulated Charge Pump at up to -15mA (Charge-Pump Doubler)
- Controlled Sequencing during Power-On and Power-Off of All Rails
- VCOM Output Range +1V to -2.49V in 6.83mV Steps
- NTC Input for Temperature Measurement/Compensation
- Low EMI
- 420kHz/2.1MHz Switching Frequency with Spread Spectrum
- I2C Control/Diagnostic Interface with FLTB (Interrupt) Output
- UV Diagnostics on All Outputs
- OV Dagnostics on All Outputs
- Bandgap Reference Out of Range
- Stuck FLTB Pin
- Communication Parity Check
- VCOM DAC Fault
- Versatile
- Non-Volatile Output Voltage Settings on AVDD/NAVDD, VGON, VGOFF, VCOM, and Sequencing
- Supports Stand-Alone Operation Mode after Programming
- Compact 5mm x 5mm TQFN32 Package
- AEC-Q100 Grade 1
应用/用途
- 中央信息显示屏
- 信息娱乐系统显示屏
- 仪表盘
描述
The MAX25222/MAX25222C are a 4-channel TFT-LCD power ICs that provide symmetrical positive AVDD and negative NAVDD supplies, as well as VGON and VGOFF gate supplies. In addition, a VCOM buffer with output voltage range above and below ground and a temperature measurement block are integrated.
The devices contain non-volatile memory so that the values of all outputs can be calibrated for the lifetime of the device (maximum five times).
Programming is carried out using the built-in I2C interface, which can also be used to read back diagnostic information. A stand-alone mode is available after the device has been programmed.
The temperature sensor interface block measures the temperature, optionally allowing the VCOM output voltage to be adjusted depending on the measured temperature. The MAX25222/MAX25222C2 includes extensive diagnostics to aid in fulfilling ASIL-B safety level.
The MAX25222/MAX25222C is available in a TQFN package and operate in the -40°C to 125°C temperature range.
Technical Docs
数据资料 | Automotive 4-Channel TFT-LCD Power Supply with VCOM Buffer and ASIL B Features | Nov 12, 2021 | |
Solution Guide | LED Driver for Automotive Display Applications | ||
Solution Guide | TFT-Bias for Automotive Applications |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。