产品详情
主要特征
应用/用途
VIN (V) (min) | 2.65 |
VIN (V) (max) | 5.5 |
# Step-Down Outputs | 2 |
# Step-Up Outputs | 2 |
# Inverting Outputs | 1 |
VOUT (V) (min) | -10.5 |
VOUT (V) (max) | 10.5 |
Package/Pins | TQFN-CU/32 |
Budgetary Price (See Notes) | 3.39 |
简化框图
Technical Docs
数据资料 | Automotive 4-Channel TFT-LCD Power Supplies with VCOM Buffer | Oct 22, 2021 | |
Solution Guide | TFT-Bias for Automotive Applications |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。
参量
VIN (V) (min) | 2.65 |
VIN (V) (max) | 5.5 |
# Step-Down Outputs | 2 |
# Step-Up Outputs | 2 |
# Inverting Outputs | 1 |
VOUT (V) (min) | -10.5 |
VOUT (V) (max) | 10.5 |
Package/Pins | TQFN-CU/32 |
Budgetary Price (See Notes) | 3.39 |
主要特征
- High Integration
- Synchronous Boost Provides AVDD of 4.2V to 10.5V at up to 200mA
- NAVDD Inverter Output at up to -200mA
- 15mA VGON Output (7.6V to 20.2V) from 3x Regulated Charge Pump
- VGOFF (-18.2V to -5.6V) from Regulated Charge Pump at up to -15mA (Charge-Pump Doubler)
- Controlled Sequencing during Power-On and Power-Off of All Rails
- VCOM Output Range +1V to -2.49V in 6.83mV Steps (MAX25221/B/C)
- NTC Input for Temperature Measurement/Compensation (MAX25221/B/C)
- Low EMI
- 420kHz/2.1MHz Switching Frequency with Spread Spectrum
- I2C Control/Diagnostic Interface with FLTB (Interrupt) Output
- UV Diagnostics on All Outputs
- Versatile
- Non-Volatile Output Voltage Settings on AVDD/NAVDD, VGON, VGOFF, VCOM, and Sequencing
- Supports Stand-Alone Operation Mode after Programming
- Compact 5mm x 5mm TQFN32 Package
- AEC-Q100 Grade 1
应用/用途
- 中央信息显示屏
- 信息娱乐系统显示屏
- 仪表盘
描述
The MAX25220/MAX25221/MAX25221B/MAX25221C are a 4-channel TFT-LCD power IC that provides symmetrical positive AVDD and negative NAVDD supplies as well as VGON and VGOFF gate supplies. In addition, a VCOM buffer with output voltage range above and below ground and a temperature measurement block are integrated (MAX25221/B/C).
The device contains non-volatile memory so that the values of all outputs can be calibrated for the lifetime of the device (maximum five times).
Programming is carried out using the built-in I2C interface, which can also be used to read back diagnostic information. A stand-alone mode is also available.
The temperature sensor interface block measures the temperature optionally allowing the VCOM output voltage to be adjusted depending on the measured temperature.
The MAX25220/MAX25221/MAX25221B/MAX25221C are available in a TQFN package and operates in the -40°C to +125°C temperature range.
Technical Docs
数据资料 | Automotive 4-Channel TFT-LCD Power Supplies with VCOM Buffer | Oct 22, 2021 | |
Solution Guide | TFT-Bias for Automotive Applications |
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后,所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站,请创建一个新帐户。有关此样片网站的任何问题,请联系SampleSupport@analog.com。