回到顶部
MyMaxim 订阅产品详情
主要特征
应用/用途
Parametric specs for Charge Pumps
| Topology | Inverter Regulated |
| VIN (V) (min) | 4.5 |
| VIN (V) (max) | 10 |
| IOUT (A) (typ) | 0.005 |
| Unadj. VOUT (V) | -4.1 |
| Adj. VOUT (V) (min) | -VIN-0.6 |
| Adj. VOUT (V) (max) | -0.5 |
| IQ (mA) (max) | 3 |
| Switching Frequency (kHz) | 100 |
| Oper. Temp. (°C) | -40 to +85 -20 to +85 |
| Package/Pins | SOIC (N)/8 |
| Budgetary Price (See Notes) | 1.83 |
缩小
简化框图
Technical Docs
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
参量
Parametric specs for Charge Pumps
| Topology | Inverter Regulated |
| VIN (V) (min) | 4.5 |
| VIN (V) (max) | 10 |
| IOUT (A) (typ) | 0.005 |
| Unadj. VOUT (V) | -4.1 |
| Adj. VOUT (V) (min) | -VIN-0.6 |
| Adj. VOUT (V) (max) | -0.5 |
| IQ (mA) (max) | 3 |
| Switching Frequency (kHz) | 100 |
| Oper. Temp. (°C) | -40 to +85 -20 to +85 |
| Package/Pins | SOIC (N)/8 |
| Budgetary Price (See Notes) | 1.83 |
主要特征
- Fixed -4.1V or Adjustable -0.5V to -9V Output at 5mA
- 4.5V to 10V Input Voltage Range
- 2mVP-P Output Voltage Ripple (MAX850-MAX852)
- 1mVP-P Output Voltage Ripple (MAX853)
- 100kHz Charge-Pump Switching Frequency (MAX850/MAX851/MAX853)
- External Synchronizing Clock Input (MAX852)
- Logic-Level Shutdown Mode: 1µA Max Over Temperature (MAX850/MAX852/MAX853)
- Low Cost, 8-Pin SO Package
应用/用途
- 蜂窝电话
- 连续可调的GaAsFET偏置
- LCD偏置对比度控制
- 负电源调节电源
- 个人通信装置、PDA
- 无线数据记录仪
描述
The MAX850-MAX853 low-noise, inverting, charge-pump power supplies are ideal for biasing GaAsFETs in cellular telephone transmitter amplifiers.
The MAX850-MAX852 offer both preset (-4.1V) and adjustable (-0.5V to -9.0V) output voltages. The MAX853 uses an external positive control voltage to set the negative output voltage. Input voltage range for all four devices is 4.5V to 10V. Output current is 5mA.
An internal linear regulator reduces the output voltage ripple to 2mVP-P. With a well-filtered control voltage (VCTRL), the MAX853 achieves typical output ripple of less than 1mVP-P. Supply current is 3mA max, and shutdown current is less than 1µA max over temperature (5µA max for MAX851).
The MAX850-MAX852 offer both preset (-4.1V) and adjustable (-0.5V to -9.0V) output voltages. The MAX853 uses an external positive control voltage to set the negative output voltage. Input voltage range for all four devices is 4.5V to 10V. Output current is 5mA.
An internal linear regulator reduces the output voltage ripple to 2mVP-P. With a well-filtered control voltage (VCTRL), the MAX853 achieves typical output ripple of less than 1mVP-P. Supply current is 3mA max, and shutdown current is less than 1µA max over temperature (5µA max for MAX851).
Technical Docs
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
询价申请