MAX660

CMOS单片电压变换器

对输入电压进行反向或倍压转换


点击查看特定型号的库存状况。

说明

The MAX660 monolithic, charge-pump voltage inverter converts a +1.5V to +5.5V input to a corresponding-1.5V to -5.5V output. Using only two low-costcapacitors, the charge pump's 100mA output replaces switching regulators, eliminating inductors and their associated cost, size, and EMI. Greater than 90% efficiency over most of its load-current range combined with a typical operating current of only 120µA provides ideal performance for both battery-powered and board-level voltage conversion applications. The MAX660 can also double the output voltage of an input power supply or battery, providing +9.35V at 100mA from a +5V input.

A frequency control (FC) pin selects either 10kHz typ or 80kHz typ (40kHz min) operation to optimize capacitor size and quiescent current. The oscillator frequency can also be adjusted with an external capacitor ordriven with an external clock. The MAX660 is a pin-compatible, high-current upgrade of the ICL7660.

The MAX660 is available in both 8-pin DIP and small-outline packages in commercial, extended, and military temperature ranges.

For 50mA applications, consider the MAX860/MAX861 pin-compatible devices (also available in ultra-small µMAX packages).

关键特性

  • Small Capacitors
  • 0.65V Typ Loss at 100mA Load
  • Low 120µA Operating Current
  • 6.5Ω Typ Output Impedance
  • Guaranteed ROUT < 15Ω for C1 = C2 = 10µF
  • Pin-Compatible High-Current ICL7660 Upgrade
  • Inverts or Doubles Input Supply Voltage
  • Selectable Oscillator Frequency: 10kHz/80kHz
  • 88% Typ Conversion Efficiency at 100mA (IL to GND)

应用

  • 手持式仪表(PDA、掌上电脑)
  • 接口供电
  • 笔记本电脑
  • 医疗仪器
  • 运算放大器电源
Part NumberTopologyVIN
(V)
VIN
(V)
ICC
(mA)
Unadj. VOUT
(V)
IOUT
(A)
Oper. Freq.
(kHz)
Oper. Temp.
(°C)
Package/PinsBudgetary
Price
minmaxmaxtypSee Notes
MAX660 
Doubler
Inverter
Unregulated
1.25.50.5
+2xVIN
-VIN
0.180
-40 to +85
0 to +70
CDIP(N)/8
PDIP(N)/8
SOIC(N)/8
$2.98 @1k
查看所有Charge Pumps (44)
Pricing Notes:
价格仅供参考,用于同类产品的比较。所提供报价为美元,需要依汇率折合成人民币。该价格将因当地关税、税率和汇率而异。有关特定订购量和指定版本的报价和供货问题,请参考:价格与供货网站或与指定代理商联系。

型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料