回到顶部
MyMaxim 订阅产品详情
主要特征
应用/用途
Parametric specs for Charge Pumps
| Topology | Doubler Regulated |
| VIN (V) (min) | 2 |
| VIN (V) (max) | 3.6 |
| IOUT (A) (typ) | 0.05 |
| Unadj. VOUT (V) | 5 |
| IQ (mA) (max) | 0.17 |
| Switching Frequency (kHz) | 500 |
| Oper. Temp. (°C) | -40 to +85 0 to +70 |
| Package/Pins | PDIP/8 SOIC (N)/8 |
| Budgetary Price (See Notes) | 1.78 |
缩小
简化框图
Technical Docs
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
参量
Parametric specs for Charge Pumps
| Topology | Doubler Regulated |
| VIN (V) (min) | 2 |
| VIN (V) (max) | 3.6 |
| IOUT (A) (typ) | 0.05 |
| Unadj. VOUT (V) | 5 |
| IQ (mA) (max) | 0.17 |
| Switching Frequency (kHz) | 500 |
| Oper. Temp. (°C) | -40 to +85 0 to +70 |
| Package/Pins | PDIP/8 SOIC (N)/8 |
| Budgetary Price (See Notes) | 1.78 |
主要特征
- Regulated 5V ±4% Charge Pump
- Output Current Guaranteed over Temperature
- 20mA (VIN ≥ 2V)
- 50mA (VIN, ≥ 3V)
- 20mA (VIN ≥ 2V)
- 2V to 3.6V Input Range
- No Inductors; Very Low EMI Noise
- Ultra-Small Application Circuit (0.1in²)
- Uses Small, Inexpensive Capacitors
- 500kHz Internal Oscillator
- Logic-Controlled 1µA Max Shutdown Supply Current
- Shutdown Disconnects Load from Input
- 8-Pin DIP and SO Packages
应用/用途
- 5V闪存编程器
- 电池供电微处理器系统
- 紧凑的5V运放电源
- 本地3.3V至5V转换器
- 元件数最少的DC-DC转换器
- 便携式仪表与手持终端
- 从锂离子备用电池产生稳定的5V电压
- 远端数据采集系统
- 低压系统中MOSFET开关的驱动电压
- 2节电池至5V转换
描述
The MAX619 step-up charge-pump DC-DC converter delivers a regulated 5V ±4% output at 50mA over temperature. The input voltage range is 2V to 3.6V (two battery cells).
The complete MAX619 circuit fits into less than 0.1in² of board space because it requires only four external capacitors: two 0.22µF flying capacitors, and 10µF capacitors at the input and output.
Low operating supply current (150µA max) and low shutdown supply current (1µA max) make this device ideal for small, portable, and battery-powered applications. When shut down, the load is disconnected from the input.
The MAX619 is available in 8-pin DIP and SO packages.
The complete MAX619 circuit fits into less than 0.1in² of board space because it requires only four external capacitors: two 0.22µF flying capacitors, and 10µF capacitors at the input and output.
Low operating supply current (150µA max) and low shutdown supply current (1µA max) make this device ideal for small, portable, and battery-powered applications. When shut down, the load is disconnected from the input.
The MAX619 is available in 8-pin DIP and SO packages.
Technical Docs
支持和培训
采样:
选择上方“样片”按钮将重定向至第三方ADI样片网站。登录后，所选部件将转移到您在此网站上的购物车。如果您之前从未使用过此网站，请创建一个新帐户。有关此样片网站的任何问题，请联系SampleSupport@analog.com。
询价申请