MAX8606EVKIT

MAX8606评估板


点击查看特定型号的库存状况。

说明

MAX8606评估板(EV kit)是经过完全安装与测试的表面安装电路板,可演示单节Li+电池线性充电器MAX8606的功能。评估板采用100mA/500mA USB端口或4.25V至14V输入电源工作;但是,当输入电压超过5.8V时将禁止充电。器件内置控制算法对Li+电池的充电过程进行优化,包括低电压预充、限压/限流快速充电、终止充电检测,并能够连续监视电池过压、高温/低温和充电时间。3.5V至4.2V的SYS输出配合低RDSON的电池开关,能够在电池深度放电或未安装时为系统供电。两个漏极开路输出用于指示充电状态,逻辑输入(/EN1和/EN2)用于选择挂起、100mA、500mA或750mA快速充电模式,最大充电电流可设置为1A。MAX8606采用节省空间的14引脚、3mm x 3mm TDFN封装。

关键特性

  • 可选择100mA、500mA充电电流,最大输入电流达1A
  • 4.25V至14V输入电压范围
  • 输入过压保护
  • 电池包热敏电阻输入
  • 充电器状态输出
  • 热管理优化充电速率
  • B型USB连接器
  • 14引脚、3mm x 3mm TDFN封装
  • 经过完全安装与测试

应用

  • 蜂窝电话、智能电话、PDA
  • 数码相机、MP3播放器
  • USB应用、充电架和坞站
型号   生产流程   工艺   样本量   不合格   FIT @ 25°C   FIT @ 55°C   Material Composition  

备注: 通过技术手段对故障率进行汇总,并映射到相关的材料部件号。 故障率与被测件的数量密切相关。

质量管理体系 >
环境管理体系 >

 
Status:
Package:
Temperature:

相关资料


MAX77960
25VIN 3A/6AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries

  • 3.5V to 25.4V Input Operating Range, 30VDC Withstand
  • 97% Peak Efficiency for 2S Battery at 9VIN/7.4VOUT/1.5AOUT
  • 97% Peak Efficiency for 3S Battery at 15VIN/12.6VOUT/2AOUT

MAX77961
25VIN 3A/6AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S/3S Li-Ion Batteries

  • 3.5V to 25.4V Input Operating Range, 30VDC Withstand
  • 97% Peak Efficiency for 2S Battery at 9VIN/7.4VOUT/1.5AOUT
  • 97% Peak Efficiency for 3S Battery at 15VIN/12.6VOUT/2AOUT

MAX20361
Small, Single-/Multi-Cell Solar Harvester with MPPT and Harvest Counter

  • Single-/Multi-Cell Solar Energy Harvester
  • Maximum Power Point Tracking (MPPT) Technique Using Fractional VOC Method
  • Battery/Supercapacitor Charger

MAX20342
USB Type-C Charger Detector with Integrated OVP

  • Low Power Consumption
  • Delivers USB Compliance and Flexibility
  • Simplifies Complex System Designs

MAX17701
4.5V to 60V, Synchronous Step-Down Supercapacitor Charger Controller

  • Optimized Feature Set for Supercapacitor Charging
  • Reliable Operation in Adverse Environmental Conditions

MAX77751
3.15A USB Type-C Autonomous Charger for 1-Cell Li+ Batteries

  • Up to 16V Protection
  • 13.7V Maximum Input Operating Voltage
  • 3.15A Maximum Charging Current

MAX77962
23VIN 3.2AOUT USB-C Buck-Boost Charger with Integrated FETs for 2S Li-Ion Batteries

  • 3.5V to 23V Input Operating Range, 30VDC Withstand Voltage
  • Reverse Leakage Protection
  • 50mA to 3.15A Programmable Input Current Limit

MAX17320
2S-4S ModelGauge m5 EZ Fuel Gauge with Protector, Internal Self-Discharge Detection, and SHA-256 Authentication

  • Battery Health + Programmable Safety/Protection
  • ModelGauge m5 EZ Algorithm
  • Precision Measurement Without Calibration